METALLURGICAL AND MATERIALS TRANSACTIONS A
CONTENTS
Volume 29A, No. 3, March 1998

This Month Featuring: The 1997 Institute of Metals Lecture, Alloy Phases, Transformations, Transport Phenomena, Mechanical Behavior, Welding & Joining, Surface Treatment, Solidification, Materials Processing, Composite Materials. View March 1998 Abstracts.

The 1997 Institute of Metals Lecture

The Role of Nanosized Particles. A Frontier in Modern Materials Science, from Nanoelectronics to Environmental Problems [pp. 713-725]
M. José-Yacamán

Alloy Phases

Characterizations of Pore and Constituent Particle Populations in 7050-T7451 Aluminum Plate Alloys [pp. 727-737]
Jimin Zhang, Marek A. Przystupa, and Annetta J. Luévano

Transformations

Computer Simulation and Experimental Investigation of the Spinodal Decomposition in the Ti-Cr Binary Alloy System [pp. 739-749]
A.M. Mebed and T. Miyazaki

Communication: On the Characteristics of M2C Carbides in the Peak Hardening Regime of AerMet 100 Steel [pp. 903-905]
Raghavan Ayer and P. Machmeier

Transport Phenomena

A Diffusion Solution for the Melting/Dissolution of a Solid at Constant Temperature and Its Use for Measuring the Diffusion Coefficient in Liquids [pp. 751-755]
X. Wan, Q. Han, and J.D. Hunt

Mechanical Behavior

Investigation of the Annealing Texture Evolution in Hafnium [pp. 757-764]
R. Bai, C.L. Briant, D.C. Paine, and J.R. Beresford

Stress-Induced Martensitic Phase Transformations in Polycrystalline CuZnAl Shape Memory Alloys under Different Stress States [pp. 765-773]
Ken Gall, Huseyin Sehitoglu, Hans J. Maier, and Kurt Jacobus

Flow Localization in Sheet Specimens with Pairs of Holes [pp. 775-780]
A.B. Geltmacher, D.A. Koss, M.G. Stout, and P. Matic

Relationship between Fracture Toughness and Crack Extension Resistance Curves (R Curves) for Ti-6Al-4V Alloys [pp. 781-789]
Takao Horiya and Teruo Kishi

A Study on Fractography in the Low-Temperature Brittle Fracture of an 18Cr-18Mn-0.7N Austenitic Steel [pp. 791-798]
Shi Cheng Liu, T. Hashida, H. Takahashi, H. Kuwano, and Y. Hamaguchi

The Critical Resolved Shear Stress of a Superalloy as a Combination of Those of Its Matrix and ' Precipitates [pp. 799-807]
Astrid Nitz and Eckhard Nembach

Deformation Structure and Subsurface Fatigue Crack Generation in Austenitic Steels at Low Temperature [pp. 809-822]
Osamu Umezawa and Kotobu Nagai

Communication: Effect of Temperature on Silicon Particle Damage in A356 Alloy [pp. 905-907]
Arun M. Gokhale, Manish D. Dighe, and Mark Horstemeyer

Welding & Joining

A Study of the Structure of Dissimilar Submerged Arc Welds [pp. 823-832]
N.A. McPherson, T.N. Baker, and D.W. Millar

Surface Treatment

Effects of Sulfur Impurity on the Scale Adhesion Behavior of a Desulfurized Ni-Based Superalloy Aluminized by Chemical Vapor Deposition [pp. 833-841]
W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, and P.K. Liaw

Solidification

Solidification of a Ternary Metal Alloy: A Comparison of Experimental Measurements and Model Predictions in a Pb-Sb-Sn System [pp. 843-853]
Matthew John M. Krane, Frank P. Incropera, and David R. Gaskell

Observations of the Columnar-to-Equiaxed Transition in Stainless Steels [pp. 855-861]
Warren J. Poole and Fred Weinberg

Materials Processing

Communication: Perovskite Phase Lead Zirconate Titanate Thin Film Deposition on Pt/SiO2/Si Substrate at Low Temperature [pp. 907-909]
Chung Cheng Chang

Composite Materials

Processing and Mechanical Properties of Magnesium-Lithium Composites Containing Steel Fibers [pp. 863-873]
J.A. Jensen and L.S. Chumbley

Al-TiC Composites In Situ-Processed by Ingot Metallurgy and Rapid Solidification Technology: Part I. Microstructural Evolution [pp. 875-891]
X.C. Tong and H.S. Fang

Al-TiC Composites In Situ-Processed by Ingot Metallurgy and Rapid Solidification Technology: Part II. Mechanical Behavior [pp. 893-902]
X.C. Tong and H.S. Fang

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine