"Advanced Materials in Golf Clubs: The Titanium Phenomenon" (Overview), C.S. Shira and F.H. Froes, May 1997, pp. 35-37.

"Advanced Titanium Alloys and Processes for Minimally Invasive Surgery" (Research Summary), H.J. Rack and J. Qazi, November 2005, pp. 69-70.

"Aerospace Applications of Beta Titanium Alloys" (Overview), R.R. Boyer, July 1994, pp. 20-23.

"Applying Titanium Alloys in Drilling and Offshore Production Systems" (Overview), R.W. Shutz, C.F. Baxter, and P.L. Boster, April 2001, pp. 33-35.

"The Automotive Application of Discontinuously Reinforced TiB-Ti Composites" (Overview), T. Saito, May 2004, pp. 33-36.

"Beta Titanium Alloys and Their Role in the Titanium Industry" (Overview), P.J. Bania, July 1994, pp. 16-19.

"The Better Characterization of Titanium Alloys" (Commentary), F.H. (Sam) Froes, September 2005, p. 41.

"Casting of Ti Prostheses and Implants with the Aid of Numerical Simulation" (Overview), M. Wu, M. Augthun, I. Wagner, and P.R. Sahm, April 2001, pp. 36-38.

"CermtTi^® Discontinuously Reinforced Ti-Matrix Composites: Manufacturing, Properties, and Applications" (Overview), S. Abkowitz, S.M. Abkowitz, H. Fisher, and P.J. Schwartz, May 2004, pp. 37-41.

"Coating and Fiber Effects on SiC-Reinforced Titanium" (Overview), D. Upadhyaya, M. Wood, C.M. Ward-Close, P. Tsakiropoulos, and F.H. Froes, November 1994, pp. 62-67.

"A Cold-Gas Spray Coating Process for Enhancing Titanium" (Overview), A.E. Segall, A.N. Papyrin, J.C. Conway, Jr., and D. Shapiro, September 1998, pp. 52-54.

"Continuous Fiber-Reinforced Titanium Aluminide Composites" (Overview), R.A. MacKay, P.K. Brindley, and F.H. Froes, May 1991, pp. 23-29.

"The Continuous Production of Titanium Powder Using Circulating Molten Salt" (Overview), G.R.B. Elliott, September 1998, pp. 48-49.

"Controlling Remelting Processes for Superalloys and Aerospace Ti Alloys" (Overview), D.K. Melgaard, R.L. Williamson, and J.J. Beaman, March 1998, pp. 13-17.

"Cost-Affordable Titanium: The Component Fabrication Perspective" (Overview), F.H. (Sam) Froes, M.N. Gungor, and M. Ashraf Imam, June 2007, pp. 28-31.

"Current and Emerging Opportunities in Titanium's Expanding Market" (Commentary), F.H. (Sam) Froes, June 2007, pp. 27.

"Current Processes for the Cold-Wall Melting of Titanium" (Overview), J.W. Sears, March 1990, pp. 17-21.

"The Current Status of Titanium Rapid Solidification" (Overview), C. Suryanarayana and F.H. Froes, March 1990, pp. 22-25.

"Deformation and Fracture of Ti- and Ti₃Al-Matrix Composites" (Overview), J.-M. Yang and S.M. Jeng, June 1992, pp. 52-57.

"The Development of Low-Cost TiAl Automotive Valves" (Research Summary), M.M. Keller, P.E. Jones, W.J. Porter III, and D. Eylon, May 1997, pp. 42-44.

"The Development of Titanium Science and Technology in India" (Overview), S. Rao, June 1997, pp. 44-46, 69.

"Direct Reduction Processes for Titanium Oxide in Molten Salt" (Overview), R.O. Suzuki, January 2007, pp. 68-71.

"Dynamic Recovery and Recrystallization in Titnaium Alloys by Hot Deformation" (Research SUmmary), T. Furuhara, B. Poorganji, H. Ave, and T. Maki, January 2007, pp. 64-67.

"Economically Producing Reactive Metals by Aerosol Reduction" (Overview), J.D. Leland, October 1996, pp. 52-55.

"The Effect of Plasma-Sprayed Coatings on the Fatigue of Titanium Alloy Implants" (Research Summary), T. Smith, February 1994, pp. 54-56.

"The Effects of Hydrogen on Titanium Aluminides" (Research Summary), D. Eliezer, F.H. Froes, and C. Suryanarayana, March 1991, pp. 59-62.

"The Eighth World Titanium Conference" (Conference Review), F.H. Froes, July 1996, pp. 59-61.

"Enhancing the Mechanical Properties of Titanium Alloys with Rapid Heat Treatment" (Overview), O.M. Ivasishin and P.E. Markovsky, July 1996, pp. 48-52.

"Enhancing Osseointegration Using Surface-Modified Titanium Implants" (Overview), Y. Yang, N. Oh, Y. Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K. Kim. S. Park, J. Bumgardner, W. Haggard, and J. Ong, July 2006, pp. 71-76.

"Environmental Behavior of Beta Titanium Alloys" (Overview), R.W. Schutz, July 1994, pp. 24-29.

"Events and Trends in Metal and Minerals Commodities" (Overview), T.M. Beazley, April 1998, pp. 39-42.

"The Evolution of Microstructure during the Processing of Gamma Ti-Al Alloys" (Overview), W. Sha, September 2006, ppl. 64-66.

"An Excerpt from JOM's Monograph on the Emergence of Titanium and Ti-6Al-4V" (Feature: Historical Insight), S. Abkowitz, June 1999, pp. 14-16.

"Fabricating Sports Equipment Components via Powder Metallurgy" (Overview), V.S. Moxson and F.H. (Sam) Froes, April 2001, pp. 39-41.

"Forming Carbonitride Coatings on Titanium by Thermochemical Treatment with C-N-O-Containing Media" (Research Summary), I.M. Pohrelyuk, O.I. Yaskiv, and V.M. Fedirko, June 2007, pp. 32-37.

"The 14^th International Ti Applications Conference and Exhibition" (Conference Review), F.H. Froes and R.H. Jones, June 1999, pp. 40-41.

"The Grindability and Wear of Ti-Cu Alloys for Dental Applications" (Research Summary), T. Okabe, M. Kikuchi, C. Ogkubo, M. Koike, O. Okuno, and Y. Oda, February 2004, pp. 46-48.

"The GTAW of Ti-6Al-4V Castings and its Effect on Microstructural and Mechanical Properties" (Research Summary), J. Ault, J. Pillers, and S. Veeck, November 2005, pp. 62-65.

"The High-Cycle Fatigue Performance of LIghtweight Titanium Automotive Suspensions" (Research Summary), M. Kocan, B. Yazgan-Kokuoz, H.J. Rack, and L. Wagner, November 2005, pp. 66-68.

"The High-Quality Precision Casting of Titanium Alloys" (Research Summary), K. Suzuki, September 1998, pp. 20-23, 34.

"High-Strength Metastable Beta-Titanium Alloys for Biomedical Applications" (Research Summary), J.I. Qazi, B. Marquardt, and H.J. Rack, November 2004, pp. 49-51.

"High-Temperature Deformation Behavior of Ti-TiB_w In-Situ Metal-Matrix Composites" (Research Summary), S. Kumari, N. Eswara Prasad, K.S. Ravi Chandran, and G. Malakondaiah, May 2004, pp. 51-55.

"Hot-Deformation Mechanisms in Near-Alpha Titanium Alloy 685" (Research Summary), V. Gopala Krishna, Y.V.R.K. Prasad, N.C. Birla, and G. Sambasiva Rao, October 1996, pp. 56-59.

"How to Market Titanium: Lower the Cost" (Commentary), F.H. Froes, February 2004, p. 39.

"The Hydrogen Embrittlement of Titanium-Based Alloys" (Overview), E. Tal-Gutelmacher and D. Eliezer, September 2005, pp. 46-49.

"Improving the Properties of Titanium Alloys by Ion Implantation" (Applied Technology), P. Sioshansi, March 1990, pp. 30, 31.

"In the 21^st Century, Will Titanium Come of Age?" (Conference Review), D.R. Hiatt, March 1990, p. 32.

"Innovations in Titanium Powder Processing" (Overview), V.S. Moxson, O.N. Senkov, and F.H. Froes, May 2000, pp. 24-26.

"In-Situ Multi-Layer Formation in the Oxidation of Ti₃Al-Nb" Research Summary), Ramana G. Reddy, February 2002, pp. 65-67.

"In-Situ Observations of Phase Transformations in Titanium" (Research Summary), D. Phelan, M. Reid, N. Stanford, and R. Dippenaar, September 2006, pp. 67-69.

"The International Workshop on Beta Titanium Alloys" (Conference Review), R.R. Boyer, July 1994, pp. 12, 13.

"Issues in the Development of Beta Titanium Alloys" (Overview), D. Eylon, A. Vassel, Y. Combres, R.R. Boyer, P.J. Bania, and R.W. Schutz, July 1994, pp. 14, 15.

"The Laser Additive Manufacture of Ti-6Al-4V" (Overview), P.A. Kobryn and S.L. Semiatin, September 2001, pp. 40-42.

"Low-Cost Titanium Armors for Combat Vehicles" (Overview), J.S. Montgomery, M.G.H. Wells, B. Roopchand, and J.W. Ogilvy, May 1997, pp. 45-47.

"The Macroscale Simulation of Remelting Processes" (Research Summary), L.A. Bertram, P.R. Schunk, S.N. Kempka, F. Spadafora, and R. Minisandram, March 1998, pp. 18-21.

"The Mechanical Alloying of Titanium Aluminides" (Overview), L. Lu, M.O. Lai, and F.H. Froes, February 2002, pp. 62-64.

"Mechanical Property Optimization via Microstructural Control of New Metastable Beta Titanium Alloys" (Overview), N. Clément, A. Lenain, and P.J. Jacques, January 2007, pp. 50-53.

"Melting, Casting, and Forging Problems in Titanium Alloys" (Overview), A. Mitchell, June 1997, pp. 40-42, 69.

"The Microstructural Characterization and Simulation of Titanium Alloys Modified with Boron" (Research Summary), S.I. Lieberman, H. Singh, Y. Mayo, A. Sreeranganathan, A.M. Gokhale, S. Tamirisakandala, and D.B. Miracle, Ja

"Microstructure Formation in Ti Alloys: In-Situ Characterization of Phase Transformation Kinetics" (Overview), E. Aeby-Gautier, F. Bruneseaux, J. Da Costa Teixeira, B. Appolaire, G. Geandier, and S. Denis, January 2007, pp. 54-58.nuary 2007, pp. 59-63.

"Modeling Thermodynamics, Kinetics, and Phase Transformation Morphology While Heat Treating Titanium Alloys" (Research Summary), S. Malinov and W. Sha, September 2005, pp. 42-45.

"Nanostructure Processing for Titanium-Based Materials" (Overview), F.H. Froes, C. Suryanarayana, G.-H. Chen, A. Frefer, and G.R. Hyde, May 1992, pp. 26-29.

"The Near-Net-Shape Manufacturing of Affordable Titanium Components for the M777 Lightweight Howitzer" (Research Summary), K.L. Klug, I. Ucok, M.N. Gungor, M. Guclu, L.S. Kramer, W.T. Tack, L. Nastac, N.R. Martin, and H. Dong, November 2004, pp. 35-41.

"The Neural Network Modeling of Titanium Alloy Phase Transformation and Mechanical Properties" (Overview), S. Malinov and W. Sha, November 2005, pp. 54-57.

"A New Concept for Producing Ti Sponge: Calciothermic Reduction" Research Summary), Katsutoshi Ono and Tyosuke O. Suzuki, February 2002, pp. 59-61.

"New Titanium Applications on the Boeing 777 Airplane" (Overview), R.R. Boyer, May 1992, pp. 23-25.

"Newly Developed Titanium Alloy Sheets for the Exhaust Systems of Motorcycles and Automobiles" (Overview), Y. Kosaka, S.P. Fox, and K. Faller, November 2004, pp. 32-34.

"Opportunities for the Titanium Industry in Bicycles and Wheelchairs" (Industrial Insight), R. Vandermark, June 1997, pp. 24-27.

"Ordered Intermetallic Alloys, Part III: Gamma Titanium Aluminides" (Overview), Y.-W. Kim, July 1994, pp. 30-39.

"The Oxidation Behavior of High-Temperature Aluminides" (Overview), I.C.I. Okafor and R.G. Reddy, June 1999, pp. 35-39.

"Phase Transformations in the Ti-6Al-4V-H System" Research Summary), J.I. Qazi, J. Rahim, O.N. Senkov, and F.H. Froes, February 2002, pp. 68-71.

"The Plasma-Enabled Recovery of Titanium by the Electrolysis of Titanate Slags" (Overview), H.R. Larson and T.W. Eagar, September 1998, pp. 56-57.

"The Potential Applications for Titanium Metal Powder and Their Life Cycle Impacts" (Overview), T.E. Norgate and G. Wellwood, September 2006, pp. 58-63.

"Powder Metallurgy Ti-6Al-4V-xB Alloys: Processing, Microstructure, and Properties" (Research Summary), S. Tamirisakandala, R.B. Bhat, V.A. Ravi, and D.B. Miracle, May 2004, pp. 60-63.

"The Pre-Alloyed Powder Metallurgy of Titanium with Boron and Carbon Additions" (Research Summary), C.F. Yolton, May 2004, pp. 56-59.

"Predicting Phase Equilibrium, Phase Transformation, and Microstructure Evolution in Titanium Alloys" (Overview), Y. Wang, N. Ma, Q. Chen, F. Zhan, S.-L. Chen, and Y.A. Chang, September 2005, pp. 32-39.

"Preparing Damage-Tolerant Titanium-Matrix Composites" (Research Summary), R.J. Lederich, W.O. Soboyejo, and T.S. Srivatsan, November 1994, pp. 68-71.

"The Present Status of Dental Titanium Casting" (Overview), T. Okabe, C. Ohkubo, I. Watanabe, O. Okuno, and Y. Takada, September 1998, pp. 24-29.

"Processing: Key to Enhancing the Performance of the 'Wonder' Metal" (Commentary), F.H. Froes, March 1990, p. 16.

"Processing Titanium and Lithium for Reduced-Cost Application" (Commentary), M.Y. Demeri and G.J. Kipouros, June 1997, p. 20.

"Producing Lower-Cost Titanium for Automotive Applications" (Overview), A.D. Hartman, S.J. Gerdemann, and J.S. Hansen, September 1998, pp. 16-19.

"Producing Ti-6Al-4V Plate from Single-Melt EBCHM Ingot" (Overview), J.R. Wood, February 2002, pp. 56-58.

"Producing Titanium Aerospace Components from Powder Using Laser Forming" (Overview), F.G. Arcella and F.H. Froes, May 2000, pp. 28-30.

"Producing Titanium Powder by Continuous Vapor-Phase Reduction" (Research Summary), D.A. Hansen and S.J. Gerdemann, November 1998, pp. 56-58.

"Producing Titanium through an Electronically Mediated Reaction" (Overview), T.H. Okabe and Y. Waseda, June 1997, pp. 28-32.

"The Production of Large Structural Titanium Castings" (Overview), J. Klepeisz and S. Veeck, November 1997, pp. 18-20.

"The Production of Low-Cost Titanium Powders" (Overview), F.H. Froes, September 1998, pp. 41-43.

"Progress in the Understanding of Gamma Titanium Aluminides" (Overview), Y-W. Kim and D.M. Dimiduk, August 1991, pp. 40-47.

"The Prospects for Hybrid Fiber-Reinforced Ti-TiB-Matrix Composites" (Overview), W. Hanusiak, C.F. Yoldon, J. Fields, V. Hammond, and R. Grabow, May 2004, pp. 49-50.

"Recent Advances in the Thermohydrogen Processing of Titanium Alloys" (Overview), O.N. Senkov, J.J. Jonas, and F.H. Froes, July 1996, pp. 42-47.

"Recent Developments in Japanese Titanium Research and Development" (Overview), M. Niinomi, July 1996, pp. 55-57.

"Recent Titanium R&D for Biomedical Applications in Japan" (Overview), M. Niinomi, June 1999, pp. 32-34.

"The Role of Competing Mechanisms inthe Fatigue-Life Variability of a Titanium and Gamma-TiAl Alloy" (Research Summary), S.K. Jha, J.M. Larsen, and A.H. Rosenberger, September 2005, pp. 50-54.

"Safety-Related Problems in the Titanium Industry in the Last 50 Years" (Featured Overview), E. Poulsen, May 2000, pp. 13-17.

"San Diego Hosts Seventh World Conference on Titanium" (Conference Review), M.C. Munson, May 1992, p. 21.

"Sheet Gamma TiAl: Status and Opportunities" (Overview), G. Das, H. Kestler, H. Clemens, and P. Bartolotta, November 2004, pp. 42-45.

"The Solid-State Spray Forming of Low-Oxide Titanium Components" (Overview), R.M. Tapphorn and H. Gabel, September 1998, pp. 45-46, 76.

"Specialty Metals Processing Consortium: The Perspective of Industrial Members" (Overview), March 1998, pp. 26-29, 50.

"Studying and Modeling Surface Gas Nitriding for Titanium Alloys" (Research Summary), A. Zhecheva, S. Malinov, and W. Sha, June 2007, pp. 38-40.

"The Technologies of Titanium Powder Metallurgy" (Overview), F.H. Froes, S.J. Mashl, V.S. Moxson, J.C. Hebeisen, and V.A. Duz, November 2004, pp. 46-48.

"The Thermomechanical Processing of Alpha/Beta Titanium Alloys" (Overview), S.L. Semiatin, V. Seetharaman, and I. Weiss, June 1997, pp. 33-39, 68.

"Thermochemical Processing of Titanium Alloys" (Overview), F.H. Froes, D. Eylon and C. Suryanarayana, March 1990, pp. 26-29.

"The Thermomechanical Processing of Titnaium and Ti-6Al-4V Thin Gage Sheet and Plate"(Research Summary), J.D.K. Rivard, C.A. Blue, D.C. Harper, J.O. Kiggans, P.A. Menchhofer, J.R. Mayotte, L. Jacobsen, and D. Kogut, November 2005, pp. 58-61.

"A Thermodynamic Investigation into Reactive-Metal Melting-Furnace Explosions" (Overview), S.C. Evans and D.F. McLaughlin, October 2005, pp. 49-52.

"The 360° Cold Bending of Ti-6Al-4V Large-Diameter Seamless Tube" (Research Summary), S. Hur and J.S. Park, June 1999, pp. 28-30.

"Titanium Armor Applications in Combat Vehicles" (Overview), Johathan S. Montgomery and Martin G.H. Wells, April 2001, pp. 29-32.

"Titanium-Boron Alloys and Composites: Processing, Properties, and Applications" (Commentary), K.S. Ravi Chandran and D.B. Miracle, May 2004, pp. 33-36.

"TiB_w-Reinforced Ti Composites: Processing, Properties, Application Prospects, and Research Needs" (Overview), K.S. Ravi Chandran, K.B. Panda, and S.S. Sahay, May 2004, pp. 42-48.

"Titanium in the Family Automobile: The Cost Challenge" (Overview), F.H. Froes, H. Friedrich, J. Kiese, and D. Bergoint, February 2004, pp. 40-44.

"The Titanium Image: Ascending to New Heights" (Commentary), F.H. Froes, June 1999, p. 13.

"The Titanium Image: Bouncing Back" (Commentary), F.H. (Sam) Froes, April 2001, p. 26.

"The Titanium Image: Facing the Realities of Life" (Commentary), F.H. Froes, May 2000, p. 12.

"The Titanium Industry: We Always Bounce Back" (Commentary), F.H. Froes, February 2002, p. 55.

"Titanium—Is the Time Now?" (Commentary), F.H. Froes, November 2004, p. 30.

"The Titanium Market: Maturing after 40 Years of Instability" (Commentary), F.H. Froes, May 1997, p. 34.

"Titanium and Other Light Metals: Let’s Do Something About Cost" (Commentary), F.H. Froes, September 1998, p. 15.

"Titanium Research at the U.K.'s Birmingham/Swansea IRC" (Overview), P.A. Blenkinsop and M.H. Loretto, July 1996, pp. 53-54.

"Ti Sheet: The Effect of Gage Length and Width Measurement on Plastic Strain Ratio" (Research Summary), A. Chamanfar and R. Mahmudi, February 2004, pp. 49-52.

"Ti and TiAl Powders by the Flash Reduction of Chloride Vapors" (Overview), H.Y. Sohn, September 1998, pp. 50-51.

"Upgrading Ilmenite into a High-Grade Synthetic Rutile" (1994 Review of Extractive Metallurgy), T.S. Mackey, April 1994, pp. 59-64.

"The Use of Cast Ti-48Al-2Cr-2Nb in Jet Engines" (Overview), P. Bartolotta, J. Barrett, T. Kelly, and R. Smashey, May 1997, pp. 48-50, 76.

"The Use of Technical Cost Modeling for Titanium Alloy Process Selection" (Overview), K. Sampath, April 2005, pp. 25-32.

"The Use of Titanium in Family Automobiles: Current Trends" (Overview), K. Faller and F.H. (Sam) Froes, April 2001, pp. 27-28.

"The Use of Titanium in Production Automobiles: Potential and Challenges" (Overview), A.M. Sherman, C.J. Sommer, and F.H. Froes, May 1997, pp. 38-41.

"Using Cold-Crucible Melting for Titanium Precision Castings" (Overview), G. Broihanne and J. Bannister, May 2000, pp. 21-23.

"Using Ti-5111 for Marine Fastener Applications" (Overview), J. Been and K. Faller, June 1999, pp. 21-24.

"Utilization of Gas-Atomized Titanium and Titanium-Aluminide Powder" (Overview), J.H. Moll, May 2000, pp. 32-34.

"Vacuum-Die Casting Titanium for Aerospace and Commercial Components" (Overview), D. Larsen and G. Colvin, June 1999, pp. 26-27.

"Vacuum Plasma Spraying: A New Concept for Manufacturing Ti-6Al-4V Structures" (Overview), H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, September 2006, pp. 50-56.

"Why Produce Titanium by EW?" (Industrial Insight), M.V. Ginatta, May 2000, pp. 18-20.

"Will Nonaerospace Applications for Titanium Ever Grow?" (Economics), F.E. Katrak, I.S. Servi, and J.C. Agarwal, July 1991, pp. 30-32.

"Will the Titanium Golf Club Be Tomorrow's Mashy Niblick?" (Overview), F.H. Froes, June 1999, pp. 18-20.

"The 'Wonder' Metal: Diversifying into the Nonaerospace Markets" (Commentary), F.H. Froes, May 1992, p. 20.