"The Advanced Processing of Materials" (Commentary), R.Y. Lin, March 1994, p. 22.

"Advanced Processing Technology for High-Nitrogen Steels" (Applied Technology), J.S. Dunning, J.W. Simmons, and J.C. Rawers, March 1994, pp. 40-42. (Correction printed in October 1994, p. 68.)

"Advancements in MEMS Materials and Processing Technology" (Overview), J.D. Olivas and S. Bolin, January 1998, pp. 38-43.

"Advances in the Computational Modeling of Thermal-Plasma Processing" (Overview), C.H. Chang and E. Pfender, June 1996, pp. 46-48.

"Advances in Processing and Characterizing Bi-Based Superconductors" (Overview), U. Balachandran, R. Jammy, M. Chudzik, A.N. Iyer, and P. Haldar, October 1996, pp. 19-23.

"Advances in the Processing and Properties of YBa₂Cu₄O₈" (Research Summary), L.J. Masur, E.R. Podtburg, C.A. Craven, A. Otto, Z.L. Wang, and D.M. Kroeger, December 1994, pp. 28-30.

"Advances in the Processing of Bulk and Thin-Film High-T_c Superconductors" (Commentary), P.J. McGinn, March 1991, p. 6.

"Aqueous Processing in Materials Science and Engineering" (Featured Overview), M.B. Mooiman and K.C. Sole, June 1994, pp. 18-28.

"Atomic-Layer Epitaxy for Heterostructures" (Research Summary), S.M. Bedair, February 1993, pp. 46-50.

"Building Components by Laser-Additive Processing" (Commentary), Khershed P. Cooper, September 2001, p. 29.

"Chemical Synthesis of Micrometer-Sized Nickel Aluminide Powders" (Research Summary), J.C. Withers, H.-C. Shiao, R.O. Loutfy, and P. Wang, August 1991, pp. 36-39.

"The Combustion Synthesis of Advanced Materials" (Research Summary), J.J. Moore, D.W. Readey, H.J. Feng, K. Monroe, and B. Mishra, November 1994, pp. 72-78.

"Critical Issues in the OPIT Processing of High-J_c BSCCO Superconductors" (Overview), K.H. Sandhage, G.N. Riley, Jr., and W.L. Carter, March 1991, pp. 21-25.

"The Current Status of Commercial Low-Temperature Silicon Epitaxy" (Overview), J.O. Borland, October 1991, pp. 23-27.

"Developing Nitride-Based Blue LEDs on SiC Substrates" (Research Summary), J. Edmond and J. Lagaly, September 1997, pp. 24-26.

"The Development and Application of Diamond-Like Carbon Films" (Overview), R. Jethanandani, February 1997, pp. 63-65.

"The Development and Potential Applications of a Pb-Al Alloy" (Research Summary), J.F. Cole and F.E. Goodwin, June 1990, pp. 41-43.

"Developments in the Synthesis of Lightweight Metals" (Overview), C.M. Ward-Close and F.H. Froes, January 1994, pp. 28-31.

"Diamond Films by the Excimer Laser Photoablation of Polymers" (Research Summary), S. Latsch and H. Hiraoka, July 1994, pp. 64, 65.

"Diamond Synthesis at Low Temperatures" (Research Summary), J.H.D. Rebello and V.V. Subramanian, July 1994, pp. 60-63.

"The Electrochemical Processing of Refractory Metals" (Overview), D.R. Sadoway, July 1991, pp. 15-19.

"Electrode Materials for Rechargeable Lithium Batteries" (Overview), A. Manthiram, March 1997, pp. 43-46.

"The Electron Beam Evaporation and Deposition Process" (Overview), L. Bianchi, May 1991, pp. 45-47.

"Emerging Technologies for the In-Situ Production of MMCs" (Overview), M.J. Koczak and M.K. Premkumar, January 1993, pp. 44-48.

"Europe's East-West Symposium on Materials and Processes" (Conference Review), F.H. Froes, April 1992, pp. 6, 7.

"Evidence of a New, Value-Added Materials Paradigm" (Opinion), L.J. Sousa, June 1993, pp. 9-11.

"Fabricating Polycrystalline High-T_c Superconductors" (Overview), M.T. Lanagan, S.E. Dorris, J.P. Singh, K.C. Goretta, U. Balachandran, C.A., Youngdahl, J.T. Dusek, J.J. Picciolo and R.B. Poeppel, June 1990, pp. 16-18.

"Fiber-Reinforced CMCs: Processing, Mechanical Behavior, and Modeling" (Overview), P.K. Liaw, October 1995, pp. 38-44.

"Fractal Material Science: A New Direction in Materials Science" (Overview), V.S. Ivanova, I.J. Bunin, and V.I. Nosenko, January 1998, pp. 52-54.

"The Frontiers of Molecular and Microscale Systems" (Conference Review), D.R. Forrest, March 1990, p. 33.

"The Fundamentals of Mechanochemical Processing" (Overview), P.G. McCormick and F.H. Froes, November 1998, pp. 61-65.

"Growing GaN by Plasma-Assisted Molecular-Beam Epitaxy" (Research Summary), R. Beresford, March 1994, pp. 54-58. (Correction printed in June 1994, p. 63.)

"High-Energy Electron-Beam Welding and Processing" (Conference Review), F.H. Froes, June 1993, pp. 59, 60.

"High-T_c Ceramic Superconductors: Overcoming A Materials Processing Challenge" (Forum Feature), S.V. Rele and R.V. Raman, March 1992, pp. 51-53.

"High-Temperature Superconductors: Synthesis Techniques and Application Requirements" (Overview), S. Sengupta, October 1998, pp. 19-26.

"In the Aerospace Materials Processing Field, 'Everything Old is New Again'" (Commentary), D.L. Bourell and W.E. Frazier, November 1992, p. 44.

"Initial Experiments on Arsenical Bronze Production" (FEATURE: Archaeotechnology), B. Earl and A. Adriaens, March 2000, pp. 14-16.

"Innovations in the Processing of Inorganic Composites" (Conference Review), S.G. Fishman, November 1990, pp. 48, 49.

"In-Situ Synthesis and Rapid Consolidation of Fully Dense MoSi₂" (Research Summary), R.V. Raman, S.V. Rele, and M.J. Paskowitz, January 1993, pp. 54, 55.

"Interconnected Metal-Ceramic Composites by Chemical Means" (Research Summary), E.D. Rodeghiero, O.K. Tse, and E.P. Giannelis, March 1995, pp. 26-28.

"Investigating the Thermal-Plasma Processing of Advanced Materials" (Overview), P.R. Taylor and M. Manrique, June 1996, pp. 43-45.

"Joining Similar and Dissimilar Advanced Engineered Materials" (Overview), W.A. Baeslack III and F.H. Froes, March 1995, pp. 13-15.

"Key Methods for Developing Single-Wall Nanotube Composites" (Overview), E.V. Barrera, November 2000, p. 38-42.

"The Laser Additive Manufacture of Ti-6Al-4V" (Overview), P.A. Kobryn and S.L. Semiatin, September 2001, pp. 40-42.

"Laser Research at Penn State's ARL," Sidebar to "Mechanical Issues in Laser and Abrasive Water Jet Cutting" (Research Summary), J. Singh and P. Denney, January 1995, p. 30.

"Manufacturing Routes for Metallic Foams" (Overview), J. Banhart, December 2000, pp. 22-27.

"Materials Issues in Strained Solid-Phase Epitaxial Growth of Si_1-xGe_x" (Overview), D.C. Paine, February 1993, pp. 55-60.

"Mathematical Models in New Process Development" (Overview), J. Szekely, February 1990, pp. 16-21.

"The Mechanical Alloying of Titanium Aluminides" (Overview), L. Lu, M.O. Lai, and F.H. Froes, February 2002, pp. 62-64.

"The Melt Spinning of Gamma Titanium Aluminides" (Research Summary), W.E. Frazier and J.S.J. Chen, November 1992, pp. 52-55.

"A Metallurgical Approach to High-T_c Microcomposites" (Design), W. Gao, D.A. Rudman and J.B. Vander Sande, June 1990, pp. 19-22.

"Metallurgical Processes for the Year 2000 and Beyond II: Q & A" (1995 Review of Extraction & Processing), H.Y. Sohn, April 1995, pp. 47-52.

"Microstructural Control in a Gamma-TiAl Alloy by MA and HIPing" (Research Summary), N. Hoo, P.S. Goodwin, R.M. Brydson, P. Tsakiropoulos, C.M. Ward-Close, and F.H. Froes, July 1996, pp. 40, 41.

"Microstructure Evolution During the Spray Deposition of Ni₃Al and Ni₃Al Composites" (Overview), X. Liang and E.J. Lavernia, July 1993, pp. 50-55.

"Modeling Mechanical Alloying: Advances and Challenges" (Overview), B.B. Khina and F.H. Froes, July 1996, pp. 36-38.

"Models for Long-Range Current Flow in Bulk Oxide Superconductors" (Research Summary), D.M. Kroeger and A. Goyal, December 1994, pp. 14-19.

"Nanophase Materials in Solid Freeform Fabrication" (Overview), A. Manthiram, D.L. Bourell, and H.L. Marcus, November 1993, pp. 66-70.

"Nanoscale Engineering of Metal/Semiconductor Interfaces" (Overview), T.D. Sands, February 1993, pp. 61-64.

"Nanostructure Processing for Titanium-Based Materials" (Overview), F.H. Froes, C. Suryanarayana, G.-H. Chen, A. Frefer, and G.R. Hyde, May 1992, pp. 26-29.

"A New Strategy for Synthesizing Polymer-Ceramic Nanocomposites" (Overview), E.P. Giannelis, March 1992, pp. 28-30.

"The One-Step Synthesis of Dense Titanium-Carbide Tiles" (Applied Technology), R.V. Raman, S.V. Rele, S. Poland, J. Lasalvia, M.A. Meyers, and A.R. Niiler, March 1995, pp. 23-25.

"Particle Technology towards the 21^st Century" (Conference Review), R.P. Singh, March 2000, pp. 20-21.

"Perspectives on New Design Tools for Material Processes" (Commentary), J.C. Malas and W.G. Frazier, September 1997, pp. 32, 33.

"Phase Relations and Alignment in Bismuth-Based High-T_c Wires" (Overview), E.E. Hellstrom, October 1992, pp. 48-53.

"Plasma Atomization: A New Process for the Production of Fine, Spherical Powders" (Overview), M. Entezarian, F. Allaire, P. Tsantrizos, and R.A.L. Drew, June 1996, pp. 53-55.

"The Plasma Etching of Electronic Materials" (Overview), T.D. Mantei, March 1994, pp. 36-39.

"Plasma Spray Forming Metals, Intermetallics, and Composites" (Overview), S. Sampath and H. Herman, July 1993, pp. 42-49.

"The P/M Processing of High-Nitrogen Stainless Steels" (Overview), J.W. Simmons, W.E. Kemp, and J.S. Dunning, April 1996, pp. 20-23.

"Polycrystalline Diamond Fibers for Metal-Matrix Composites" (Applied Technology), H.-M. Ting and M.L. Lake, March 1994, pp. 23-25.

"Pressure-Infiltration Processing of Reinforced Aluminum" (Tutorial), A. Mortensen, V.J. Michaud, and M.C. Flemings, January 1993, pp. 36-43.

"The Process Synthesis of Bulk Superconductors" (Overview), R.G. Bautista, June 1990, pp. 23-25.

"The Processing and Properties of a Nylon 6/Clay Hybrid" (Forum Features), A. Okada, March 1993, p. 71. (Correction printed in August 1993, p. 69.)

"The Processing and Properties of Discontinuously Reinforced Aluminum Composites" (Featured Overview), A.L. Geiger and J.A. Walker, August 1991, pp. 8-15.

"Processing Ceramic-Matrix Composites Using Electrophoretic Deposition" (Research Summary), A.R. Boccaccini and C.B. Ponton, October 1995, pp. 34-37.

"Processing High Critical Current Density Bi-2223 Wires and Tapes" (Overview), P. Haldar and L. Motowidlo, October 1992, pp. 54-58.

"Processing High-T_c Ceramic Superconducting Wire" (Forum Feature), L.D. Woolf and R.A. Olstad, March 1992, p. 54.

"Processing High-T_c Superconductors for Higher Critical Current Densities" (Commentary), K.H. Sandhage, October 1992, p. 41.

"Processing Intermetallic Composites by Self-Propagating, High-Temperature Synthesis" (Applied Technology), D.E. Alman, J.A. Hawk, A.V. Petty, Jr., and J.C. Rawers, March 1994, pp. 31-35.

"The Processing, Properties, and Prospects of Tl-1223" (Overview), J.E. Tkaczyk, December 1994, pp. 26, 27.

"Processing Techniques for Bulk High-T_c Superconductors" (Featured Overview), S. Jin, March 1991, pp. 7-12.

"Producing Titanium Aluminide Foil from Plasma-Sprayed Preforms" (Research Summary), S.C. Jha and J.A. Forster, July 1993, pp. 57-59.

"Producing Titanium Powder by Continuous Vapor-Phase Reduction" (Research Summary), D.A. Hansen and S.J. Gerdemann, November 1998, pp. 56-58.

"The Production of Low-Cost Titanium Powders" (Overview), F.H. Froes, September 1998, pp. 41-43.

"Progress in the Melt Texturing of RE-123 Superconductors" (Overview), P.J. McGinn, December 1994, pp. 31-33.

"The Pulsed-Laser Deposition of Superconducting Thin Films" (Overview), R.K. Singh and J. Narayan, March 1991, pp. 13-20.

"The Rapid Thermal Processing Chemical Vapor Deposition of Silicon Epitaxial Films" (Overview), K.H. Jung, T.Y. Hsieh, and D.L. Kwong, October 1991, pp. 38-43.

"Rapid Thermal Processing for Silicon Nanoelectronics Applications"(Overview), A.T. Fiory, June 2005, pp. 27-29.

"Reactive Liquid Processing in Composites Production" (Commentary), A. Bronson, June 1997, p. 47.

"The Reactive Liquid Processing of Ceramic-Metal Composites" (Overview), C. Odegard and A. Bronson, June 1997, pp. 52-54.

"The Reactive Processing of Silicides" (Overview), R. Radhakrishnan, S. Bhaduri, and C.H. Henager, Jr., January 1997, pp. 41-45.

"Recent Advances in Bismuth-Based Superconductors" (Research Summary), U. Balachandran, A.N. Iyer, J.Y. Huang, R. Jammy, P. Haldar, J.G. Hoehn, Jr., G. Galinski, and L.R. Motowidlo, December 1994, pp. 23-25.

"Recent Advances in the Thermohydrogen Processing of Titanium Alloys" (Overview), O.N. Senkov, J.J. Jonas, and F.H. Froes, July 1996, pp. 42-47.

"Recent Developments in Ceramic Nanocomposites" (Overview), S. Bhaduri and S.B. Bhaduri, January 1998, pp. 44-51.

"Recent Progress in Silicon Molecular-Beam Epitaxy" (Overview), H.-J. Gossmann and D.J. Eaglesham, October 1991, pp. 28-31.

"Reducing Costs in Aircraft: The Metals Affordability Initiative Consortium" (Featured Overview), R. Martin and D. Evans, March 2000, pp. 24-28.

"The Role of Process Variables in Laser-Based Direct Metal Solid Freeform Fabrication" (Overview), Jack Beuth and Nathan Klingbeil, September 2001, pp. 36-39.

"Rotating Water Layer Atomization of an Aluminum-Chromium Alloy" (Research Summary), J.J. Ramon, F.S. Dirnfeld, and D. Schechtman, August 1992, pp. 15-19.

"RTCVD Growth and Applications of Epitaxial Si_1-xGe_x Alloys" (Overview), J.C. Sturm, October 1991, pp. 44-47.

"Solidification in Direct Metal Deposition by LENS Processing" (Overview), W. Hofmeister M. Griffith, M. Ensz, and J. Smugeresky, September 2001, pp. 30-34.

"Solid-State Spray Forming of Aluminum Near-Net Shapes" (Innovations in Aluminum, Part II), H. Gabel and R. Tapphorn, August 1997, pp. 31-33.

"Space: A Unique Environment for Process Modeling R&D" (Featured Overview), T. Overfelt, October 1991, pp. 8-11.

"Spray-Atomized and Codeposited 6061 Al/SiC_p Composites" (Research Summary), J. Wu and E.J. Lavernia, August 1991, pp. 16-23.

"The Spray Deposition of Metals and Composites" (Commentary), P.S. Gilman, July 1993, p. 41.

"The State of the Art in Electron-Beam Melting and Refining" (Conference Review), R. Bakish, June 1993, pp. 61-63.

"The State of Fundamental Applied Research in Amorphous Materials" (Commentary), Khershed P. Cooper, March 2002, p. 33.

"The Structural Applications of Mechanical Alloying" (Conference Review), F.H. Froes, December 1990, pp. 24-25.

"The Symposium on Materials Processing in the Computer Age" (Conference Review), V.R. Voller, June 1991, p. 6.

"The Synthesis Processing and Modeling of Advanced Materials" (Conference Review), F.H. Froes, January 1998, pp. 55-56.

"The Synthesis and Properties of Zr-Based Metallic Glasses and Glass-Matrix Composites" (Research Summary), M. Heilmaier and J. Eckert, July 2000, pp. 43-47.

"Synthesizing Aluminum Alloys by Double Mechanical Alloying" (Research Summary), L. Froyen, L. Delaey, X.P. Niu, P. Le Brun, and C. Peytour, March 1995, pp. 16-19.

"Synthesizing and Processing Advanced Materials" (Conference Review), J. Singh and S.M. Copley, March 1995, p. 29.

"Synthesizing Gamma-TiAl Alloys by Reactive Powder Processing" (Research Summary), G. Wang and M. Dahms, May 1993, pp. 52-56.

"Synthesizing Mullite from Beneficiated Fly Ash" (Research Summary), J.-Y. Hwang, X. Huang, and A.M. Hein, May 1994, pp. 36-39.

"Synthesizing, Processing, and Modeling Advanced Materials" (Conference Review), F.H. Froes, February 1992, pp. 9-10.

"Synthesizing Submicrometer and Nanoscale Particles via Self-Assembled Molecular Membranes" (Overview), G.-M. Chow, M.A. Markowitz, and A. Singh, November 1993, pp. 62-65.

"Texturing of YBa₂Cu₃O_6+x by Melt Processing" (Overview), P.J. McGinn, W. Chen, and N. Zhu, March 1991, pp. 26-28.

"The Thermal Plasma Near-Net-Shape Spray Forming of Al Composites" (Research Summary), M. Smagorinski, P. Tsantrizos, S. Grenier, M. Entezarian, and F. Ajersch, June 1996, pp. 56-59.

"The Thermodynamics and Kinetics of Film Agglomeration" (Tutorial), D.J. Srolovitz and M.G. Goldiner, March 1995, pp. 31-36, 76, 77.

"The Thermophysical Properties of Bulk Metallic Glass-Forming Liquids" (Overview), R. Busch, July 2000, pp. 39-42.

"III-V Nitride Semiconductors for High-Performance Blue and Green Light-Emitting Devices" (Overview), D. Steigerwald, S. Rudaz, H. Liu, R.S. Kern, W. Götz, and R. Fletcher, September 1997, pp. 18-23.

"Ultrahigh-Vacuum CVD Epitaxy of Silicon and Ge_xSi_1-x" (Overview), M. Racanelli and D.W. Greve, October 1991, pp. 32-37.

"The Use of Containerless Processing in Researching Reactive Materials" (Featured Overview), J.K.R. Weber, S. Krishnan, and P.C. Nordine, July 1991, pp. 8-14.

"Using Equal-Channel Angular Pressing for Refining Grain Size" (Overview), T.G. Langdon, M. Furukawa, M. Nemoto, and Z. Horita, April 2000, pp. 30-33.

"Vapor-Grown Carbon-Fiber Composites: Processing and Electrostatic Dissipative Applications" (Overview), K. Lozano, November 2000, pp. 34-36.

"Visualizing Current Flow in High-T_c Superconductors" (Research Summary), D. Larbalestier, X.Y. Cai, H. Edelman, M.B. Field, Y. Feng, J. Parrell, A. Pashitski, and A. Polyanskii, December 1994, pp. 20-22.

"Wetting in Nonreactive Liquid Metal-Oxide Systems" (Overview), B.M. Gallois, June 1997, pp. 48-51.

"The Workshop on Advanced Sintered Materials" (Conference Review), F.H. Froes, January 1995, pp. 14, 15.