"About the Pre-Hispanic Au-Pt “Sintering” Technique for Making Alloys" (Research Summary), M. Noguez, R. García, G. Salas, T. Robert, and J. Ramírez, May 2006, pp. 38-43.

"Advanced Sheet Steels for Automotive Applications" (Overview), J.R. Fekete, D.C. Strugala, and Z. Yao, January 1992, pp. 17-21.

"Aluminum: New Challenges in Downstream Activities" (Overview), M.N. Becker, November 1999, pp. 26-38.

"Analyzing Casting Problems by the On-line Monitoring of Continuous Casting Mold Temperatures" (Overview), PO. Hemy, R. Smylie, and C. Srinivasan, January 2002.

"The Application of High-Strength, Hot-Rolled Steels in Auto Wheels" (Research Summary), G. Marron and P. Teracher, July 1996, pp. 16-20.

"The Application of Neural Networks in the Modeling of Plate Rolling Processes" (JOM-e: Applied Technology), A.A. Gorni, April 1997.

"Applications for the Strontium Treatment of Wrought and Die-Cast Al" (Research Summary), B. Kulunk and D.J. Zuliani, October 1996, pp. 60-63.

"Applying Numerical Taguchi Optimization to Metal Forming" (Research Summary), R. Srinivasan and A. Chaudhary, February 1990, pp. 22, 23.

"The Automated Measurement of Strains from Three-Dimensional Deformed Surfaces" (Featured Overview), J.H. Vogel and D. Lee, February 1990, pp. 8-13.

"Automating a Silver Ingot Casting and Stacking Operation" (Industrial Insight), N. Worswick, April 2003, pp. 55-56.

"Award-Winning Ornamental Metal Fabrication: How the Metals Medal" (Overview), Maureen Byko, June 2002, pp. 19-22.

"The Basics of Modern Semi-Solid Metal Processing" (Overview), F. Czerwinski, June 2006, pp. 17-20.

"Building Components by Laser-Additive Processing" (Commentary), Khershed P. Cooper, September 2001, p. 29.

"The Bulk Application of High-T_c Superconductors in Japan" (Overview), K-I. Sato, August 1995, pp. 65-67.

"Calculating Solidification and Transformation in As-Cast CMSX-10" (Applied Technology), G.E. Fuchs and B.A. Boutwell, January 2002, pp. 45-48.

"Casting Process Simulation and Viaualization: A JOM-e Perspective" (Commentary), Brian G. Thomas, January 2002, pp. 20-21.

"Characterizing Al Tailor-Welded Blanks for Automotive Applications" (Overview), R.W. Davies, H.E. Oliver, M.T. Smith, and G.J. Grant, November 1999, pp. 46-50.

"The CMSF Process: The Spray Forming of Clean Metal" (JOM-e: Overview), W.T. Carter, Jr., M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes Jones, H.E. Lippard, and R.L. Kennedy, April 1999.

"Cold-Rolled, High-Strength Sheet Steels for Auto Applications" (Overview), W. Bleck, July 1996, pp. 26-30.

"The Commercial Application of Low-Cost Titanium Composites" (Overview), S. Abkowitz, P.F. Weihrauch, S.M. Abkowitz, and H.L. Heussi, August 1995, pp. 40,

"Computational Fluid Dynamics: A Virtual Prototyping Tool for Materials Engineering" (Overview), A. Mukhopadhyay, B. Devulapalli, A. Dutta, and E.W. Grald, March 2004, pp. 44-48.

"The Computer-Aided Design and Manufacture of Sheet Metal Parts" (Forum Feature), R. Brandegger, July 1990, pp. 48-50.

"The Computer-Aided Hot-Forging Simulation of P/M Connecting Rods" (Overview), A.G.K. Jinka, August 1995, pp. 42-45.

"The Continuing Study of Damascus Steel: Bars from the Alwar Armory" (Archaeotechnology), J.D. Verhoeven, A.H. Pendray, and W.E. Dauksch, September 2004, pp. 17-20.

"The Corrosion Performance of Magnesium Alloy AM-SC1 in Automotive Engine Block Applications" (Research Summary), G. Song, D. St.John, C. Bettles, and G. Dunlop, May 2005, pp. 54-56.

"Cost-Affordable Titanium: The Component Fabrication Perspective" (Overview), F.H. (Sam) Froes, M.N. Gungor, and M. Ashraf Imam, June 2007, pp. 28-31.

"Crucible Damascus Steel: A Fascination for Almost 2,000 Years" (Overview), A. Feuerbach, May 2006, pp. 48-50.

"Current Progress in the Use of Forming Limit Diagrams" (Conference Review), K.S. Chan, February 1990, pp. 6-7.

"Current Wrought Magnesium Alloys: Strengths and Weaknesses" (Research Summary), C.J. Bettles and M.A. Gibson, May 2005, pp. 46-49.

"The Deformation of Low-Stacking-Fault-Energy Austenitic Steels" (Overview), I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, and H.J. Maier, July 2002, pp. 31-37.

"The Deformation Physics of Nanocrystalline Metals: Experiments, Analysis, and Computations" (Overview), M.A. Meyers, A. Mishra, and D.J. Benson, April 2006, pp. 41-48.

"Dendrite Fragmentation and the Effects of Fluid Flow in Castings" (Overview), A. Hellawell, S. Liu, and S.Z. Lu, March 1997, pp. 18-20.

"Developing Hybrid Polymer Composites with Embedded Shape-Memory Alloy Wires" (Overview), P. Sittner and R. Stalmans, October 2000, pp. 15-20.

"The Development of 5XXX Aluminum Alloys for RCS Applications" (Overview), J.K. McBride, R.E. Sanders, Jr., and H.G. Reavis, June 1996, pp. 18-21.

"The Development of Low-Cost TiAl Automotive Valves" (Research Summary), M.M. Keller, P.E. Jones, W.J. Porter III, and D. Eylon, May 1997, pp. 42-44.

"The Development of Metal-Based Smart Composites" (Overview), H. Asanuma, October 2000, pp. 21-25.

"Developments in the Annealing of Sheet Steels" (Conference Review), R. Pradhan, January 1992, p. 16.

"A Diffusion-Multiple Approach for Mapping Phase Diagrams, Hardness, and Elastic Modulus" (Overview), J.-C. Zhao, M.R. Jackson, L.A. Peluso, and L.N. Brewer, July 2002, pp. 42-45.

"The Direct Metal Deposition of H13 Tool Steel for 3-D Components" (Research Summary), J. Mazumder, J. Choi, K. Nagarathnam, J. Koch, and D. Hetzner, May 1997, pp. 55-60.

"DOE's Program on the Application of High-T_c Wire" (Overview), R. Hawsey and J. Daley, August 1995, pp. 56-58.

"Drawn Arc Aluminum Stud Welding for Automotive Applications" (Research Summary), S. Ramasamy, August 2002, pp. 44-46.

"Dynamic Recovery and Recrystallization in Titnaium Alloys by Hot Deformation" (Research Summary), T. Furuhara, B. Poorganji, H. Ave, and T. Maki, January 2007, pp. 64-67.

"The Effect of Hot Isostatic Pressing on Cast Aluminum" (Research Summary), C.S.C. Lei, W.E. Frazier, and E.W. Lee, November 1997, pp. 38, 39.

"The Effect of Preaging on the Delayed Aging of Al-7Si-0.3Mg" (Research Summary), S. Murali, Y. Arunkumar, P.V.J. Chetty, K.S. Raman, and K.S.S. Murthy, February 1997, pp. 29, 30, 33.

"Eight Routes to Improve the Tensile Ductility of Bulk Nanostructured Metals and Alloys" (Overview), E. Ma, April 2006, pp. 49-53.

"Electrochemical Machining: The Role of Steel Microstructure in High-Rate Anodic Dissolution" (Research Summary), T. Haisch and E.J. Mittemeijer, July 2002, pp. 38-41.

"Electroplasticity—The Effect of Electricity on the Mechanical Properties of Metals" (Research Summary), H. Conrad, A.F. Sprecher, W.D. Cao and X.P. Lu, September 1990, pp. 28-33.

"European Developments in Simulating Forming Processes Using Three-Dimensional Finite-Element Analysis" (Overview), P. Hartley, I. Pillinger, and C.E.N. Sturgess, October 1991, pp. 12-14.

"Eutectic Solidification and its Role in Casting Porosity Formation" (Overview), L. Lu, K. Nogita, S.D. McDonald, and A.K. Dahlel, November 2004, pp. 52-58.

"The Evolution of Microstructure during the Processing of Gamma Ti-Al Alloys" (Overview), W. Sha, September 2006, ppl. 64-66.

"The Evolution of Technology for Materials Processing over the Last 50 Years: The Automotive Example" (Overview), A.I. Taub, P.E. Krajewski, A.A. Luo, and J.N. Owens, February 2007, pp. 48-57.

"The Evolution of Technology for Structural Materials over the Last 50 Years" (Overview), J. Wadsworth, February 2007, pp. 41-47.

"Expanding the Extrusion Limits of Wrought Magnesium Alloys" (Overview), C. Davies and M. Barnett, May 2004, pp. 22-24.

"The Extrusion Freeforming of Functional Ceramic Prototypes" (Overview), R. Vaidyanathan, J. Walish, J.L. Lombardi, S. Kasichainula, P. Calvert, and K.C. Cooper, December 2000, pp. 34-37.

"Fabricating Sports Equipment Components via Powder Metallurgy" (Overview), V.S. Moxson and F.H. (Sam) Froes, April 2001, pp. 39-41.

"Fabricating the Weapons and Armor of The Lord of the Rings" (The Arts), M. Byko, November 2002, pp. 20-23.

"The Fabrication of Bulk Ultrafine-Grained Zirconium by Accumulative Roll Bonding" (Research Summary), L. Jiang, O.A. Ruano, M.E. Kassner, M.T. Perez-Prado, June 2007, pp. 42-45.

"The Fabrication and Creep Properties of Superalloy-Zirconia Composites" (Research Summary), R.K. Oruganti and A.K. Ghosh, January 2003, pp. 21-27.

"The Fabrication and Thermomechanical Behavior of Al and Ti SMA Composites" (Research Summary), K. Mizuuchi, October 2000, pp. 26-31.

"Flow Localization and Plastic Instability during the Tensile Deformation of Al Alloy Sheet" (Research Summary), M. Aghaie-Khafri and R. Mahmudi, November 1998, pp. 50-52.

"The Basics of Modern Semi-Solid Metal Processing" (Overview), F. Czerwinski, June 2006, pp. 17-20.

"The Formability of Austenitic Stainless Steels" (Retained Austenite in Steel), S.F. Peterson, M.C. Mataya, and D.K. Matlock, September 1997, pp. 54-58.

"Forming and Bonding Techniques for High-Strength Aluminum Alloys" (Overview), H.E. Friedrich, February 1995, pp. 33-35.

"Full-Density, Net-Shape Powder Consolidation Using Dynamic Magnetic Pulse Pressures" (Overview), B. Chelluri and J.P. Barber, July 1999, pp. 36-37.

"Functional Metal, Ceramic, and Composite Prototypes by Solid Freeform Fabrication" (Commentary), K.R. Vaidyanathan, December 2000, p. 30.

"The Fundamentals of Nanostructured Materials Processed by Severe Plastic Deformation" (Overview), Y.T. Zhu and T. G. Langdon, October 2004, pp. 58-63.

"The Grain Refinement of 6063 Aluminum Using Al-5Ti-1B and Al-3Ti-0.15C Grain Refiners" (Research Summary), P. Moldovan and G. Popescu, November 2004, pp. 59-61.

"Heat Treating Aluminum with Fluid-Bed Quenching" (Overview), M. Glasser, May 1998, pp. 48-50.

"High-Strain-Rate Superplasticity in Aluminum-Matrix Composites" (Overview), T.R. Bieler, R.S. Mishra, and A.K. Mukherjee, February 1996, pp. 52-57.

"High-Strength Metastable Beta-Titanium Alloys for Biomedical Applications" (Research Summary), J.I. Qazi, B. Marquardt, and H.J. Rack, November 2004, pp. 49-51.

"High-Temperature Superconductors for Electric Power and High-Energy Physics" (Overview), V. Selvamanickam, D.W. Hazelton, L. Motowidlo, F. Krahula, J. Hoehn, Jr., M.S. Walker, and P. Haldar, October 1998, pp. 27-30.

"High-Velocity Metal Forming—An Old Technology Addresses New Problems" (Overview), G.S. Daehn, M. Altynova, V.S. Balanethiram, G. Fenton, M. Padmanabhan, A. Tamhane, and E. Winnard, July 1995, pp. 42-45.

"The History and Evolution of Wiredrawing Techniques" (Feature), B.D. Newbury and M.R. Notis, February 2004, pp. 33-37.

"The Hot Deformation of Aluminum Alloys" (Commentary), Thomas R. Bieler, L.A. Lalli, and S.R. MacEwen, June 1998, pp. 14-15.

"How Roebling Did It: Building the World's First Wire-Rope Suspension Aqueduct in 1840s Pittsburgh" (Overview), D.L. Gibbon, May 2006, pp. 20-29.

"ICME at GE: Accelerating the Insertion of New Materials and Processes" (Overview), D.G. Backman, D.Y. Wei, D.D. Whitis, M.B. Buczek, P.M. Finnigan, and D. Gao, November 2006, pp. 36-41.

"Incorporating Crystallographic Texture in Deformation Process Simulations" (Overview), P.R. Dawson and A.J. Beaudoin, Jr., September 1997, pp. 34-41, 83.

"The Influence of Heating Element Temperature on Productivity" (Research Summary), A.K. Singh, S. Saptharishi, B. Basu, and J.A. Sekhar, November 2002, pp. 76-80.

"The Influence of Severe Plastic Deformation on the Mechanical Properties ofAA6111" (Research Summary), K. Rhee, R. Lapovok and P.F. Thomson, May 2005, pp. 62-66.

"Integrated Computational Materials Engineering: A New Paradigm for the Global Materials Profession" (Commentary), J. Allison, D. Backman, and L. Christodoulou, November 2006, pp. 25-27.

"Investigating Solidification with the Laser-Engineered Net Shaping (LENSTM) Process" (JOM-e: Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A. Philliber, M. Griffith, and M. Ensz, July 1999.

"Investigating the Thermal-Plasma Processing of Advanced Materials" (Overview), P.R. Taylor and M. Manrique, June 1996, pp. 43-45.

"Key Technologies for Manufacturing and Processing Sheet Materials: A Global Perspective" (Overview), Mahmoud Y. Demeri, February 2001, pp. 33-36.

"The Laser Additive Manufacture of Ti-6Al-4V" (Overview), P.A. Kobryn and S.L. Semiatin, September 2001, pp. 40-42.

"The Laser Forming of Metallic Components Using Particulate Materials" (Overview), D.M. Keicher and J.E. Smugeresky, May 1997, pp. 51-54.

"Linking Length Scales via Materials Informatics" (Overview), Z.-K. Liu, L.-Q. Chen, and K. Rajan, November 2006, pp. 42-50.

"Macroscopic Damage by the Formation of Shear Bands during the Rolling and Deep Drawing of Magnesium Sheets" (Research Summary), Fr.-W. Bach, B.-A. Behrens, M. Rodman, A. Rossberg, and G. Kurz, May 2005, pp. 57-61.

"Macrosegregation in Directionally Solidified Dendritic Alloys" (Research Summary), R.N. Grugel and L.N. Brush, March 1997, pp. 26-30.

"Magnesium: Current and Potential Automotive Applications" (Overview), Alan A. Luo, February 2002, pp. 42-48.

"The Manufacture and Fabrication of Tantalum" (Overview), K.D. Moser, April 1999, pp. 29-31.

"Mechanical Issues in Laser and Abrasive Water Jet Cutting" (Research Summary), J. Singh and S.C. Jain, January 1995, pp. 28-30.

"Mechanism and Preventive Measures for Die Soldering during Al Casting in a Ferrous Mold" (Research Summary), Sumanth Shankar and Diran Apelian, August 2002, pp. 47-54.

"Melting, Casting, and Forging Problems in Titanium Alloys" (Overview), A. Mitchell, June 1997, pp. 40-42, 69.

"Metal-Casting Process Design: Postmortem and Predictive Troubleshooting" (JOM-e: Research Summary), T.Y. Goraya, M.S. Soclof, D.G. Yan, and Z. Meng, April 1997.

"Metal Forming at the Center of Excellence for the Synthesis and Processing of Advanced Materials" (Overview), D.A. Hughes, M.E. Kassner, M.G. Stout, and J.S. Vetrano, June 1998, pp. 16-21.

"A Metallurgical Expert System for Interpreting FEA" (Overview), K.J. Meltsner, October 1991, pp. 15-17.

"Metal Solid Freeform Fabrication Using Semi-Solid Slurries" (Overview), C.S. Rice, P.F. Mendez, and S.B. Brown, December 2000, pp. 31-33.

"Metals and Alloys Nanostructured by Severe Plastic Deformation: Commercializaiton Pathways" (Overview), T.C. Lowe, April 2006, pp. 28-32.

"Mg Sheet Metal Forming: Lessons LEarned from Deep Drawing Li and Y Solid-Solution Alloys" (Research Summary), S.R. Agnew, J.W. Seen, and J.A. Horton, May 2006, pp. 62-69.

"The Microstructural Characterization of Semi-Solid Slurries" (Overview), S. Nafisi and R. Ghomashchi, June 2006, pp. 24-30.

"Microstructural Evolution during the Hot Working of Superalloys" (Commentary), S.L. Semiatin and T.R. Bieler, January 1999, p. 13.

"Microstructure and Creep Behavior in AE42 Magnesium Die-Casting Alloy" (Research Summary), Bob R. Powell, Vadim Rezhets, Michael P. Balogh, and Richard A. Waldo, August 2002, pp. 34-38.

"Microstructure Modeling and Prediction during Thermomechanical Processing" (Conference Review), A.J. Beaudoin, R. Srinivasan, and S.L. Semiatin, January 2002, pp. 25-29.

"Microstructure-Property Relationships in Pearlitic Eutectoid and Hypereutectoid Carbon Steels" (Overview), E.M. Taleff, J.J. Lewandowski, and B. Pourladian, July 2002, pp. 25-30.

"Microstructure-Property Relationships in Steels: Improving Performance" (Commentary), E.M. Taleff, July 2002, p. 18.

"Modeling and Simulating Metal-Forming Equipment" (JOM-e: Applied Technology), W.G. Frazier, E.A Medina, W.M. Mullins, and R.D. Irwin, April 1997.

"Modeling Composition/Processing/Property Relationships in a Cold-Rolled Aluminum Alloy" (Research Summary), I.J. Polmear, J.E. Tibballs, and B. Rinderer, November 1999, pp. 51-53.

"Modeling the Recrystallization Textures of Aluminum Alloys after Hot Deformation" (Overview), O. Engler and H.E. Vatne, June 1998, pp. 23-27.

"Models for Severe Plastic Deformation by Equal-Channel Angular Extrusion" (Overview), S.L. Semiatin, A.A. Salem, and M.J. Saran, October 2004, pp. 69-77.

"The Modern Blacksmith: Metalworker, Craftsperson, Historical Re-enactor" (Feature), Maureen Byko, October 2002, pp. 17-20.

"The Mold Filling and Solidification of a Complex Foundry Casting" (Overview), S.G.R. Brown, J.A. Spittle, and J.D. James, January 2002.

"Monitoring the Solidification of Single-Crystal Castings Using High-Energy X-Ray Diffraction" (JOM-e: Research Summary), D.W. Fitting, W.P. Dubé, and T.A. Siewert, July 1999.

"Multi-Scale Al 5083 for Military Vehicles with Improved Performance" (Overview), A. Piers Newbery, S.R. Nutt, and E.J. Lavernia, April 2006, pp. 56-61.

"Nanomaterials by Severe Plastic Deformation: Fundamentals, Modeling, and Optimization" (Commentary), M.J. Saran, October 2004, p. 57.

"An NDE Formability Test for Sheet Metal" (Forum Feature), A.V. Clark, July 1990, p. 48.

"The Near-Net-Shape Manufacturing of Affordable Titanium Components for the M777 Lightweight Howitzer" (Research Summary), K.L. Klug, I. Ucok, M.N. Gungor, M. Guclu, L.S. Kramer, W.T. Tack, L. Nastac, N.R. Martin, and H. Dong, November 2004, pp. 35-41.

"Net-Shape Processing Using an Aqueous-Based MIM Binder" (Overview), J.C. LaSalle and M. Zedalis, July 1999, pp. 38-39.

"A New Paradigm: The Investment Casting Cooperative Arrangement" (Overview), B.A. Mueller and P. Monaghan, September 1994, pp. 17-20.

"Newly Developed Titanium Alloy Sheets for the Exhaust Systems of Motorcycles and Automobiles" (Overview), Y. Kosaka, S.P. Fox, and K. Faller, November 2004, pp. 32-34.

"Ni-Based Superalloys for Turbine Discs" (Overview), D. Furrer and H. Fecht, January 1999, pp. 14-17.

"The Numerical Simulation of Continuous and Investment Casting" (Overview), Philippe Thevoz, Matthias Gaumann, and Marco Gremaud, January 2002.

"Observing and Measuring Solidification Phenomena at High Temperatures" (JOM-e: Overview), C. Orrling, Y. Fang, N. Phinichka, S. Sridhar, and A.W. Cramb, July 1999.

"An Optical Roughness Sensor for Real-Time Quality Measurement" (Research Summary), R.D. Payne, A.L. Moran, C.J. Madden, and P. Kelley, October 1991, pp. 18-21.

"An Optical Technique to Measure Distortion in Heat-Treated Parts In-Situ" (Research Summary), F. Sciammarella and P. Nash, May 2005, pp. 67-70.

"Optimizing the Ring-Rolling Operation with Process Control" (Overview), U. Koppers, February 1992, pp. 24-27.

"The Physical Metallurgy of Nitinol for Medical Applications" (Overview), Alan R. Pelton, Scott M. Russell, and John DiCello, May 2003, pp. 33-37.

"Planar and Variable-Diameter Jets for Uniform Droplet Sprays" (Overview), T.W. Lee and A.A. Tseng, August 1998, pp. 24-25.

"Plasma-Spray Forming Ceramics and Layered Composites" (Research Summary), S. Sampath, R. Gansert, and H. Herman, October 1995, pp. 30-33.

"The Possible Application of Nb-W.Cr Alloys in High-Temperature Air" (Research Summary), B. Portillo, P. Kakarlapudi, and S.K. Varma, June 2007, pp. 46-49.

"Post-Processing Analysis in Sheet-Metal Forming Simulation" (Applied Technology), M.Y. Demeri and S.C. Tang, June 1992, pp. 14-16.

"Predicting Residual Stresses in Gas Turbine Components" (Research Summary), R.A. Wallis and I.W. Craighead, October 1995, pp. 69-71.

"The Present Status of Dental Titanium Casting" (Overview), T. Okabe, C. Ohkubo, I. Watanabe, O. Okuno, and Y. Takada, September 1998, pp. 24-29.

"Preventing Melt-Water Explosions" (Overview), R.P. Taleyarkan, February 1998, pp. 35-38.

"Process Strategies for Niobium Sheet Used in Advanced Superconducting Particle Accelerator Cavities" (Overview), D. Baars, T.R. Bieler, K.T. Hartwig, H. Jiang, C. Compton, and T.L. Grimm, June 2007, pp. 50-55.

"Processing Maps for Optimizing Gas Atomization and Spray Deposition" (Overview), S. Hariprasad and S.M.L. Sastry, October 1995, pp. 56-59.

"The Processing, Properties, and Applications of High-Strain-Rate Superplastic Materials" (Overview), M. Mabuchi and K. Higashi, June 1998, pp. 34-39.

"Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation" (Overview), R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T. Zhu, April 2006, pp. 33-39.

"Producing Large P/M Near-Net Shapes Using Hot Isostatic Pressing" (Overview), S.J. Mashl, J.C. Hebeisen, and C.G. Hjorth, July 1999, pp. 29-31.

"Producing Lower-Cost Titanium for Automotive Applications" (Overview), A.D. Hartman, S.J. Gerdemann, and J.S. Hansen, September 1998, pp. 16-19.

"Producing Ti-6Al-4V Plate from Single-Melt EBCHM Ingot" (Overview), J.R. Wood, February 2002, pp. 56-58.

"Production-Scale Spray Forming of Superalloys for Aerospace Applications" (JOM-e: Industrial Insight), G.A. Butzer, April 1999.

"Recent Developments in Low-Carbon Sheet Steels" (Overview), J.G. Speer and D.K. Matlock, July 2002, pp. 19-24.

"Recent Developments in the Progress of Superalloy 718" (Overview), E.A. Loria, June 1992, pp. 33-36.

"Recent Developments in a Vision-Based Surface Strain Measurement System" (Overview), D.W. Manthey and D. Lee, July 1995, pp. 46-49.

"The Role of Process Variables in Laser-Based Direct Metal Solid Freeform Fabrication" (Overview), Jack Beuth and Nathan Klingbeil, September 2001, pp. 36-39.

"The Science, Technology, and Applications of Magnesium" (Overview), F.H. Froes, D. Eliezer, and E. Aghion, September 1998, pp. 30-34.

"The Sacred in Mesoamerican MAterials" (Overview), G. Salas, J. Ramírex, and M. Noguez, May 2006, pp. 44-47.

"The Semi-Solid Processing of Alloys and Composites" (Conference Review), C. Levaillant and M. Suery, December 1990, p. 26.

"The Sensitivity of Lab-Measured Friction Coefficients" (Testing & Analysis), J.P. Haruff, C.J. Van Tyne, and D.K. Matlock, July 1995, pp. 50-52.

"Sheet Gamma TiAl: Status and Opportunities" (Overview), G. Das, H. Kestler, H. Clemens, and P. Bartolotta, November 2004, pp. 42-45.

"Sheet Metal Formability Studies at the National Institute of Standards and Technology" (Overview), J.T. Foecke, S.W. Banovic, and R.J. Fields, February 2001, pp. 27-30.

"Sheet Metal Forming: A Review" (Tutorial), W.F. Hosford and J.L. Duncan, November 1999, pp. 39-44.

"Simulating Convective Die Heating for Forgings and Pressure Casting" (Research Summary), Biswajit Basu, Santhanuy Jana, G.S. Reddy, and J.A. Sekhar, August 2002, pp. 39-43.

"Simulating Microstructural Evolution during the Hot Working of Alloy 718" (Research Summary), M.C. Mataya, January 1999, pp. 18-26.

"The Simulation of Acoustic Emission for Metal Forging" (Testing & Analysis), W.M. Mullins, R.D. Irwin, S. Venugopal, and J.C. Malas, September 1996, pp. 35-37.

"The Solid-State Spray Forming of Low-Oxide Titanium Components" (Overview), R.M. Tapphorn and H. Gabel, September 1998, pp. 45-46, 76.

"Solidification in Direct Metal Deposition by LENS Processing" (Overview), W. Hofmeister M. Griffith, M. Ensz, and J. Smugeresky, September 2001, pp. 30-34.

"Spray Forming: Alloys, Products, and Markets" (JOM-e: Overview), A. Leatham, April 1999.

"The Status of Applications for High-T_c Superconducting Wire" (Overview), W.E. Brockenborough and A.P. Malozemoff, August 1995, pp. 59, 60.

"The Structural Evolution of Superalloy Ingots during Hot Working" (Overview), R.M. Forbes Jones and L.A. Jackman, January 1999, pp. 27-31.

"Substituting Tube-Hydroformed Parts for Automotive Stampings" (Economics), Bruce Constantine, Ridhard Roth, and Joel P. Clark, August 2001, pp. 33-38.

"Substructural Influence in the Hot Rolling of Al Alloys" (Overview), H.J. McQueen, June 1998, pp. 28-33.

"Superconductivity Research and Applications Development at IGC" (Overview), R.S. Sokolowski, V. Selvamanickam, D.W. Hazelton, L.R. Motowidlo, M.S. Walker, and P. Haldar, August 1995, pp. 61-64.

"The Superplastic Forming of Bulk Metallic Glasses" (Overview), J. Schroers, May 2005, pp. 35-39.

"Superplasticity in Cation-Doped YSZ" (Research Summary), Manabu Nakano, H. Nagayama, and T. Sakuma, March 2001, pp. 27-29.

"Superplasticity: Mechanisms and Applications" (Commentary), John S. Vetrano, March 2001, p. 22.

"Superplasticity and Superplastic Forming of Aluminum Metal-Matrix Composites" (Overview), T.G. Nieh and J. Wadsworth, November 1992, pp. 46-50.

"The Technology and Commercial Status of Powder-Injection Molding" (Overview), A. Bose, August 1995, pp. 26-30.

"Technology Innovation in Aluminum Products" (Overview), Robert E. Sanders, Jr., February 2001, pp. 21-25.

"The Thermal Modeling of Large Axisymmetric Forgings" (Applied Technology), C.J. Van Tyne, R.B. Focht, T.D. Nelson, and W. Reese, September 1994, pp. 24-26.

"The Thermal Plasma Near-Net-Shape Spray Forming of Al Composites" (Research Summary), M. Smagorinski, P. Tsantrizos, S. Grenier, M. Entezarian, and F. Ajersch, June 1996, pp. 56-59.

"Thermal Spraying I: Powder Consolidation—From Coating to Forming" (Overview), R.W. Smith and R. Knight, August 1995, pp. 32-39.

"Thermal Spraying II: Recent Advances in Thermal Spray Forming" (Overview), R.W. Smith and R. Knight, April 1996, pp. 16-19.

"Thermochemical Processing of Titanium Alloys" (Overview), F.H. Froes, D. Eylon and C. Suryanarayana, March 1990, pp. 26-29.

"The Thermomechanical Processing of Alpha/Beta Titanium Alloys" (Overview), S.L. Semiatin, V. Seetharaman, and I. Weiss, June 1997, pp. 33-39, 68.

"The Thermomechanical Processing of Titnaium and Ti-6Al-4V Thin Gage Sheet and Plate"(Research Summary), J.D.K. Rivard, C.A. Blue, D.C. Harper, J.O. Kiggans, P.A. Menchhofer, J.R. Mayotte, L. Jacobsen, and D. Kogut, November 2005, pp. 58-61.

"The Three-Dimensional Simulation of Flow Pattern in Equal-Channel Angular Extrusion" (JOM-e: Overview), H.J. Cui, R.E. Goforth, and K.T. Hartwig, August 1998.

"A Three-Step Approach to Designing a Metal-Forming Process" (Overview), J.S. Gunasekera and A.F. Ali, June 1995, pp. 22-25.

"Ti Sheet: The Effect of Gage Length and Width Measurement on Plastic Strain Ratio" (Research Summary), A. Chamanfar and R. Mahmudi, February 2004, pp. 49-52.

"Titanium Investment Casting Defects: A Metallographic Overview" (Overview), J.D. Cotton, L.P. Clark, and H.R. Phelps, June 2006, pp. 13-16.

"Transient Fluid Flow in a Continuous Steel-Slab Casting Mold" (Overview), B.G. Thomas, Q. Yuan, S. Sivaramakrishnan, and S.P. Vanka, January 2002.

"Trends in Aerospace Forgings in the 1990s" (Industrial Insight), S.C. Jain and B.P. Bardes, May 1994, pp. 49-53.

"Trends in the Global Aluminum Fabrication Industry" (Overview), S. Das and W. Yin, February 2007, pp. 83-87.

"Trends and Needs in Can Stock: A Packaging Company's Perspective" (Industrial Insight), W.C. Hoyle and F.R. Setlak, November 1996, pp. 33-36.

"The Twin-Roll Strip Casting of Magnesium" (Overview), D. Liang and C.B. Cowley, May 2004, pp. 26-28.

"An Ultrasonic Sensor for High-Temperature Materials Processing" (Testing & Analysis), D.A. Stubbs and R.E. Dutton, September 1996, pp. 29-31.

"The USAMP Magnesium Powertrain Cast Components Project" (Overview), Bob R. Powell, February 2002, pp. 49-50.

"The Use of Cast Ti-48Al-2Cr-2Nb in Jet Engines" (Overview), P. Bartolotta, J. Barrett, T. Kelly, and R. Smashey, May 1997, pp. 48-50, 76.

"The Use of Metal Threads and Decorations in Byzantine–Greek Orthodox Ecclesiastical Textiles" (Research Summary), A. Karatzani and Th. Rehren, May 2006, pp. 34-37.

"The Use of Wrought Magnesium in Bicycles" (Overview), J. Deetz, May 2005, pp. 50-53.

"The Use of Severe Plastic Deformation Techniques in Grain Refinement" (Overview), T. C. Lowe and R.Z. Valiev, October 2004, pp. 64-69.

"Using Artificial Intelligence to Model Heavy Plate Mill Rolling" Research Summary), Vicente Rodríguez Montequín, Francisco Ortega Fernández, Nicoláa de Abajo Martíz, and Juan Antonio González Rodríguez, July 2002, pp. 46-50.

"Using Intense Plastic Straining for High-Strain-Rate Superplasticity" (Research Summary), T.G. Langdon, M. Furukawa, Z. Horita, and M. Nemoto, June 1998, pp. 41-45.

"Using the Finite Element Method in Metal-Forming Processes" (Applied Technology), R. Duggirala, February 1990, pp. 24-27.

"Using OIM to Investigate the Microstructural Evolution of Ti-6Al-4V" (Applied Technology), T.R. Bieler, M.G. Glavicic, and S.L. Semiatin, January 2002, pp. 31-36.

"Using RABiTS to Fabricate High-Temperature Superconducting Wire" (Overview), A. Goyal, R. Feenstra, F.A. List, M. Paranthaman, D.F. Lee, D.M. Kroeger, D.B. Beach, J.S. Morrell, T.G. Chirayil, D.T. Verebelyi, X. Cui, E.D. Specht, D.K. Christen, and P.M. Martin, July 1999, pp. 19-23.

"Virtual Aluminum Castings: An Industrial Application of ICME" (Overview), J. Allison, M. Li, C. Wolverton, and X.-M. Su, November 2006, pp. 28-35.

"Wrought Magnesium: A 21st Century Outlook" (Overview), S.R. Agnew, May 2004, pp. 20-21.