"Aluminum Fabrication and Applications" (Overview), E.L. Rooy, August 2000.

"Aluminum Solidification Processing: Prospective and Retrospective Views of the Industry and the Field" (Overview), D. Apelian, August 2000.

"The Application of Neural Networks in the Modeling of Plate Rolling Processes" (JOM-e: Applied Technology), A.A. Gorni, April 1997.

"JOM-e: The Application of Nondestructive Evaluation Technologies" (Commentary), P.K. Liaw, January 2003, pp. 10-11.

"Autonomous Ultrahard Materials Discovery via Spreadsheet-Implemented Neural Network Cascades" (JOM-e: Applied Technology), S.L. Thaler, April 1997.

"Ceramic Films Using Cathodic Electrodeposition" (JOM-e: Overview), I. Zhitomirsky, January 2000.

"Ceria-Based High-Temperature Coatings for Oxidation Prevention" (JOM-e: Research Summary), S. Seal, S.K. Bose, and S.C. Kuiry, January 2000.

"The Challenge of Precursor Compounds in the MOCVD of Oxides" (JOM-e: Overview), R. Xu, October 1997.

"The CMSF Process: The Spray Forming of Clean Metal" (JOM-e: Overview), W.T. Carter, Jr., M.G. Benz, A.K. Basu, R.J. Zabala, B.A. Knudsen, R.M. Forbes Jones, H.E. Lippard, and R.L. Kennedy, April 1999.

"A Computational Materials Science Course for Undergraduate Majors" J.M. Rickman and R.P. Vinci, December 2003.

"Computational Materials Science and Materials Informatics: Glossary," (JOM-e: Speakers' Slides), K. Ferris, March 2007.

"The Cyclic Oxidation Performance of Aluminide and Pt-Aluminide Coatings on Cast Ni-Based Superalloy CM-247" (JOM-e: Research Summary), D.K. Das, V. Singh, and S.V. Joshi, January 2000.

"Data Mining and Materials Informatics: A Primer," (JOM-e: Speakers' Slides), K. Rajan, March 2007.

"Data Organization and Knowledge Discovery," (JOM-e: Speakers' Slides), P. Mason, March 2007.

"Data Patterns and Links to Materials Theory: Theoretical Foundations for Heuristic Pattern Detectio," (JOM-e: Speakers' Slides), K. Ferris, March 2007.

"Developing, Integrating, and Sharing Web-Based Resources for Materials Education." (JOM-e: Overview), D.J.M. Clark, May 1998.

"Discrete Modeling via Function Approximation Methods: Bridging Atomic- and Microscales" (JOM-e: Overview), A.G. Jackson and M.D. Benedict, August 1999.

"Electromagnetic Enhancement of Melt Spinning and Strip Casting." (JOM-e: Overview), J.S.-J. Chen, K. Zhang, M.N.O. Sadiku, and A.A. Tseng, February 1998.

"Embedded NDE with Piezoelectric Wafer-Active Sensors in Aerospace Applications" (JOM-e: Overview), V. Giurgiutiu, January 2003.

"Everything You Need to Know about Being a Manager but Never Learned in College" (JOM-e: Overview), N. Bahtishi, June 1999.

"Extrusion Die Design: A New Methodology of Using Design of Experiments as a Precursor to Neural Networks" (JOM-e: Overview), B.V. Mehta, H. Ghulman, and R. Gerth, September 1999.

"The Food Industry's Global Challenges and Opprotunities" (JOM-e), A.P. Holenstein, January 2005.

"Functional Coatings and Their Applications: A Web Perspective" (Commentary), N.B. Dahotre, January 2000, p. 14.

"The Functionality of Laser-Surface-Engineered Composite Titanium Diboride Coatings" (JOM-e: Research Summary), A. Agarwal and N.B. Dahotre, January 2000.

"Grain Refinement in Aluminum Alloys by Means of Electromagnetic Vibrations Including Cavitation Phenomena" (JOM-e: Overview), C. Vivés, February 1998.

"High-Density-Infrared Transient Liquid Coatings" (JOM-e: Overview), C.A. Blue, V.K. Sikka, E.K. Ohriner, P.G. Engleman, and D.C. Harper, January 2000.

"Holistic Strategies for Designing Multistage Materials Processes" (Overview), W.G. Frazier and E.A. Medina, September 1999.

"Implications for National Policy" (JOM-e), T. Marichaux, June 2005.

"Implications for Corporate Research Management" (JOM-e), D. Chong, June 2005.

"Implications for National Laboratories" (JOM-e), L. Horton, June 2005.

"Implications for Government Agencies" (JOM-e), S. Johnson, June 2005.

"Implications for Universities" (JOM-e), H. Rack, June 2005.

"Implications for the Electronics Industry" (JOM-e), D. Frear, June 2005.

"Implications for the Manufacturing Industry" (JOM-e), D. Apelian, June 2005.

"Implications for Materials Societies" (JOM-e), B. Mishra, June 2005.

"Incorporating Hybrid Models into a Framework for Designing Multistage Material Processes" (Overview), E.A. Medina, September 1999.

"An Integrated Education Program on Computational Thermodynamics, Kinetics, and Materials Design" (JOM-e: Overview), Z.-K. Liu, L.-Q. Chen, K.E. Spear, and C. Pollard, December 2003.

"Intellectual Property Models for Collaborative Research and Development" (JOM-e: Overview), P. Ziarnik, June 1999.

"Investigating Solidification with the Laser-Engineered Net Shaping (LENSTM) Process" (JOM-e: Overview), W. Hofmeister, M. Wert, J. Smugeresky, J.A. Philliber, M. Griffith, and M. Ensz, July 1999.

"Managing Research and Development under Multicompany Collaboration" (JOM-e: Overview), J.P. Reimann, June 1999.

"Materials in Architecture: Will We Ever Meet the Demands?" (JOM-e), S.N. Pollalis, January 2005.

"Materials Engineering Challenges for the Society of "Tomorrow": Housing, Transportation, Health, and Food Delivery Needs" (JOM-e), D. Apelian, January 2005.

"The Materials Informatics Workshop: Theory and Application" (Conference Review), L.M. Peurrung, K. Ferris, and T.M. Osman, March 2007, pp. 50.

"Materials Informatics: Theory and Application (Introduction)," (JOM-e: Speakers' Slides), K. Rajan, March 2007.

"Metal-Casting Process Design: Postmortem and Predictive Troubleshooting" (JOM-e: Research Summary), T.Y. Goraya, M.S. Soclof, D.G. Yan, and Z. Meng, April 1997.

"The Microstructural Characterization of Sensors Based on Electronic Ceramic Materials." (JOM-e: Overview), P.I. Gouma, S.A. Akbar, and M.J. Mills, November 1998.

"The Mobility of Ions in Lanthanum Fluoride Nanoclusters" (JOM-e: Research Summary), V.L. Bulatov, R.W. Grimes, and A.H. Harker, April 1997.

"Modeling and Simulating Metal-Forming Equipment" (JOM-e: Applied Technology), W.G. Frazier, E.A. Medina, W.M. Mullins, and R.D. Irwin, April 1997.

"Modeling the Gas By-products of Metalorganic Chemical Vapor Deposition" (JOM-e: Research Summary), J.G. Jones and P.D. Jero, August 1999.

"Monitoring the Solidification of Single-Crystal Castings Using High-Energy X-Ray Diffraction" (JOM-e: Research Summary), D.W. Fitting, W.P. Dubé, and T.A. Siewert, July 1999.

"Multimedia Tutorials for an Introductory Course on the Science of Engineering Materials" (JOM-e: Overview), C.J. McMahon, Jr., and R. Weaver, May 1998.

"National Science Foundation Opportunities for Collaborative Research" (JOM-e: Overview), B.A. MacDonald, June 1999.

"The NDE Analysis of Tension Behavior in Nicalon/SiC Ceramic-Matrix Composites" (JOM-e: Overview), J. Kim, P.K. Liaw, and H. Wang, January 2003.

"The Nondestructive Evaluation of Advanced Ceramics and Ceramic-Matrix Composites" (JOM-e: Overview), J. Kim and P.K. Liaw, November 1998.

"The November JOM-e: The NDE of Material Properties" (Commentary), P.K. Liaw, November 1998, p. 66.

"NSDL Materials Digital Library Pathway," (JOM-e: Speakers' Slides), L. Bartolo, March 2007.

"The Numerical Analysis of Creep Deformation and Cavitation in TiAl Intermetallic Alloys" (JOM-e: Research Summary), A. Chakraborty and J.C. Earthman, August 1998.

"Observing and Measuring Solidification Phenomena at High Temperatures" (JOM-e: Overview), C. Orrling, Y. Fang, N. Phinichka, S. Sridhar, and A.W. Cramb, July 1999.

"Our Experience in Teaching Thermodynamics at the University of Wisconsin, Madison" (JOM-e: Overview), Y.A. Chang and W.A. Oates, December 2003.

"An Overview of the Aluminum Industry" (Overview), R.B. Evans, August 2000.

"A Perspective on Aluminum Metal Treatment" (Overview), C.E. Eckert, August 2000.

"Predicting Microstructure from Atomistic Rule Set Cellular Automata" (JOM-e: Overview), K.J.W. Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee, A.G. Jackson, and S.R. LeClair, August 1999.

"Producing Functionally Graded Coatings by Laser-Powder Cladding" (JOM-e: Research Summary), Y.T. Pei and J.Th.M. De Hosson, January 2000.

"Production-Scale Spray Forming of Superalloys for Aerospace Applications" (JOM-e: Industrial Insight), G.A. Butzer, April 1999.

"Recent Developments in the Thermomechanical Fatigue Life Prediction of Superalloys" (JOM-e: Overview), C. Cai, P.K. Liaw, M. Ye, and J. Yu, April 1999.

" Recycling Opportunities, Technical Challenges, and Illusions" (JOM-e), D.B. Spencer, January 2005.

"Restoring Health, from Replacement Parts to Regenerative Medicine: Challenges and Opportunities" (JOM-e), A.J. Coury, January 2005.

"The Role of Materials in Sustainable Mobility—Examining Long-Term Vehicular Materials Usage" (), R. Kirchain, January 2005.

"Software for Teaching Materials Processing and Diffusion" (JOM-e: Overview), S.E. Mohney, A.J. Miller, and G.L. Gray, December 2003.

"Solidification Processing of Materials in Magnetic Fields" (JOM-e: Overview), B.Q. Li, February 1998.

"The Solubility of Silica in Calcium Ferrite Slags" (JOM-e: Research Summary), C.M. Acuña and A. Yazawa, October 1997.

"Spray Forming: Alloys, Products, and Markets" (JOM-e: Overview), A. Leatham, April 1999.

"Surviving a Layoff" (JOM-e: Overview), E. Schwartz, June 1999.

"JOM-e: The Symposium on Computational Methods in Materials Education" (Commentary), Z.-K. Liu, L.-Q. Chen, and M. Asta, December 2003, p. 13.

"The Thermocyclic Behavior of Differently Stabilized and Structured EB-PVD TBCs" (JOM-e: Research Summary), U. Schulz, K. Frischer, C. Leyens, M. Peters, and W.A. Kaysser, October 1997.

"Thermography: A New Nondestructive Evaluation Method in Fatigue Damage" (JOM-e: Overview), B. Yang, P.K. Liaw, H. Wang, J.Y. Huang, R.C. Kuo, and J.G. Huang, January 2003.

"The Three-Dimensional Simulation of Flow Pattern in Equal-Channel Angular Extrusion" (JOM-e: Overview), H.J. Cui, R.E. Goforth, and K.T. Hartwig, August 1998.

"The 2002 TMS Annual Meeting Cyanide Roundtable" (Cyanide Roundtable Discussion), Corby Anderson and Courtney Young, December 2001.

"The Use of Multimedia in Developing Undergraduate Engineering Courses" (JOM-e: Overview), V.R. Voller, J.F. Watson, and S. Hoover, May 1998.

"Using Acoustic Emission in Fatigue and Fracture Materials Research" (JOM-e: Research Summary), M. Huang, L. Jiang, P.K. Liaw, C.R. Brooks, R. Seeley, and D.L. Klarstrom, November 1998.

"Using Fuzzy Logic for Molecular Modeling" (JOM-e: Overview), D.A. Ress, August 1999.

"Using Hybrid Modeling for Testing Intelligent Software for Lunar-Mars Closed Life Support"(JOM-e: Overview), J.T. Malin, September 1999.

"Using Hybrid Modeling for the Interdisciplinary Design of More Affordable Systems" (Overview), J.W. Poindexter, B.A. Stucke, and G.C. Shumaker, September 1999.

"Using Scanning Acoustic Microscopy to Study Subsurface Defects and Crack Propagation in Materials" (JOM-e: Research Summary), Z.M. Connor, M.E. Fine, J.D. Achenbach, and M.E. Seniw, November 1998.

"Wettability, Spreading, and Interfacial Phenomena in High-Temperature Coatings" (JOM-e: Overview), R. Asthana and N. Sobczak, January 2000.

"The World is Flat: The Globalization of Materials R&D" (Conference Review), T. Marechaux and W.H. Hunt, Jr., June 2005, pp. 12-13.