"Brushing Up on the History of Intermetallics in Dentistry" (Featured Overview), R.M. Waterstrat, March 1990, pp. 8-14.

"Ceramics and Composites for Rocket Engines and Space Structures" (Featured Overview), K. Upadhya, May 1992, pp. 15-18.

"Chemical Synthesis of Micrometer-Sized Nickel Aluminide Powders" (Research Summary), J.C. Withers, H.-C. Shiao, R.O. Loutfy, and P. Wang, August 1991, pp. 36-39.

"The Combustion Synthesis of Ni-Ti Shape Memory Alloys" (Research Summary), H.C. Yi and J.J. Moore, August 1990, pp. 31-35.

"Computational Tools for Alloy Design: Solid Solutions in Gamma-TiAl" (Overview), C. Woodward, S.I. Rao, and D.M. Dimiduk, July 1998, pp. 37-41.

"Continuous Fiber-Reinforced Titanium Aluminide Composites" (Overview), R.A. MacKay, P.K. Brindley, and F.H. Froes, May 1991, pp. 23-29.

"The Creep of Intermetallics and Their Composites" (Research Summary), K. Sadananda and C.R. Feng, May 1993, pp. 45-48.

"Deformation and Fracture of Ti- and Ti₃Al-Matrix Composites" (Overview), J.-M. Yang and S.M. Jeng, June 1992, pp. 52-57.

"The Development of Low-Cost TiAl Automotive Valves" (Research Summary), M.M. Keller, P.E. Jones, W.J. Porter III, and D. Eylon, May 1997, pp. 42-44.

"The Development of Nb-Based Advanced Intermetallic Alloys for Structural Applications" (Overview), P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk, January 1996, pp. 33-38.

"The Effect of Retained Austenite on Contact Fatigue in Cr-Ni-W Carburized Steel" (Retained Austenite in Steel), B.B. Vinokur and A.L. Geller, September 1997, pp. 69-71, 83.

"The Effects of Hydrogen on the Hardness of Fe-Al Alloys" (Research Summary), H. Hosoda, K. Mizuuchi, and K. Inoue, August 1997, pp. 56-59.

"The Effects of Hydrogen on Titanium Aluminides" (Research Summary), D. Eliezer, F.H. Froes, and C. Suryanarayana, March 1991, pp. 59-62.

"Environmental Effects on Ductile-Phase Toughening in Nb₅Si₃-Nb Composites" (Research Summary), J.D. Rigney, P.M. Singh, and J.J. Lewandowski, August 1992, pp. 36-41.

"The Evolution of Microstructure during the Processing of Gamma Ti-Al Alloys" (Overview), W. Sha, September 2006, ppl. 64-66.

"The Fatigue Resistance of TiAl-Based Alloys" (Overview), K.S. Chan, July 1997, pp. 53-58.

"The Fracture Behavior of Diffusion-Bonded Duplex Gamma TiAl" (Research Summary), G. Çam, K.-H. Bohm, J. Müllauer, and M. Koçak, November 1996, pp. 66-68.

"The Fracture Resistance and Crack-Tip Micromechanics of In-Situ Intermetallic Composites" (Research Summary), K.S. Chan and D.L. Davidson, September 1996, pp. 62-67.

"High-Temperature Aluminides and Intermetallics" (Conference Review), V.R. Parameswaran, June 1992, pp. 41-43.

"High-Temperature Refractory Metal-Intermetallic Composites" (Overview), M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, and H.A. Lipsitt, January 1996, pp. 39-44.

"In-Situ Multi-Layer Formation in the Oxidation of Ti₃Al-Nb" Research Summary), Ramana G. Reddy, February 2002, pp. 65-67.

"In-Situ Synthesis and Rapid Consolidation of Fully Dense MoSi₂" (Research Summary), R.V. Raman, S.V. Rele, and M.J. Paskowitz, January 1993, pp. 54, 55.

"Intermetallic Alloys and Their Composites: The Promise and Challenges Remain" (Commentary), J.M. Sanchez and P.K. Liaw, May 1993, p. 36.

"Intermetallic Compounds: Structure and Properties" (Conference Review), D.M. Shah and D.L. Anton, February 1992, pp. 6, 7.

"The International Symposium on Structural Intermetallics" (Conference Review), J.D. Whittenberger, May 1994, pp. 46-47.

"Investment Casting of NiAl Single-Crystal Alloys" (Overview), K.O. Yu, J.A. Oti, and W.S. Walston, May 1993, pp. 49-51.

"Let's Be Upbeat on Advanced Materials!" (Commentary), F.H. Froes, July 1996, p. 35.

"LiMAT-93: Light Materials for Transportation Systems" (Conference Review), N.J. Kim and D.H. Kim, November 1994, pp. 44-47.

"The Mechanical Alloying of Titanium Aluminides" (Overview), L. Lu, M.O. Lai, and F.H. Froes, February 2002, pp. 62-64.

"The Mechanical Behavior of In-Situ NiAl- Refractory Metal Composites" (Overview), J.-M. Yang, August 1997, pp. 40-43.

"The Mechanical Properties of In-Situ Composites" (Overview), R.M. Aikin, Jr., August 1997, pp. 35-39

"The Melt Spinning of Gamma Titanium Aluminides" (Research Summary), W.E. Frazier and J.S.J. Chen, November 1992, pp. 52-55.

"Melting and Casting Processes for High-Temperature Intermetallics" (Overview), S. Sen and D.M. Stefanescu, May 1991, pp. 30-34.

"Metal Hydrides for Vehicular Applications: The State of the Art" (Metal Hydrides), D. Chandra, J.J. Reilly, and R. Chellappa, February 2006, pp. 26-32.

"Metal- and Intermetallic-Matrix Composites for Aerospace Propulsion and Power Systems" (Overview), J. Doychak, June 1992, pp. 46-51.

"Microscopic Studies on Hydrogen Effects on Mechanical Properties" (Overview), I.M. Robertson and D. Teter, November 1996, pp. 55-60.

"Microstructural Control in a Gamma-TiAl Alloy by MA and HIPing" (Research Summary), N. Hoo, P.S. Goodwin, R.M. Brydson, P. Tsakiropoulos, C.M. Ward-Close, and F.H. Froes, July 1996, pp. 40-41.

"Microstructural Control in Ti-Al for Enhanced Mechanical Properties" (Overview), G.A. Salishchev, R.M. Imayev, O.N. Senkov, and F.H. Froes, December 2000, pp. 46-48.

"The Microstructure and Properties of Rapidly Solidified, Dispersion-Strengthened NiAl" (Forum Feature), S.C. Jha and R. Ray, October 1990, pp. 58-61.

"Microstructure Evolution During the Spray Deposition of Ni₃Al and Ni₃Al Composites" (Overview), X. Liang and E.J. Lavernia, July 1993, pp. 50-55.

"Moisture and Hydrogen-Induced Embrittlement of Iron Aluminides" (Overview), N.S. Stoloff and D.J. Duquette, December 1993, pp. 30-35.

"NiAl for High-Temperature Structural Applications" (Overview), R. Darolia, March 1991, pp. 44-49.

"The Numerical Analysis of Creep Deformation and Cavitation in TiAl Intermetallic Alloys" (JOM-e: Research Summary), A. Chakraborty and J.C. Earthman, August 1998.

"Ordered Intermetallic Alloys, Part I: Nickel and Iron Aluminides" (Overview), C.T. Liu and K.S. Kumar, May 1993, pp. 38-44.

"Ordered Intermetallic Alloys, Part II: Silicides, Trialuminides, and Others" (Overview), K.S. Kumar and C.T. Liu, June 1993, pp. 28-34.

"Ordered Intermetallic Alloys, Part III: Gamma Titanium Aluminides" (Overview), Y.-W. Kim, July 1994, pp. 30-39.

"The Oxidation and Protection of Gamma Titanium Aluminides" (Overview), M.P. Brady, W.J. Brindley, J.L. Smialek, and I.E. Locci, November 1996, pp. 46-50.

"The Oxidation Behavior of High-Temperature Aluminides" (Overview), I.C.I. Okafor and R.G. Reddy, June 1999, pp. 35—39.

"The Oxidation Resistance of MoSi₂ Composites" (Research Summary), E.W. Lee, J. Cook, A. Khan, R. Mahapatra, and J. Waldman, March 1991, pp. 54-57.

"Pesting of the High-Temperature Intermetallic MoSi₂" (Research Summary), T.C. Chou and T.G. Nieh, December 1993, pp. 15-21.

"Plasma Spray Forming Metals, Intermetallics, and Composites" (Overview), S. Sampath and H. Herman, July 1993, pp. 42-49.

"Platinum-Group-Metal-Based Intermetallics as High-Temperature Structural Materials" (Overview), Y. Yamabe-Mitarai, Y. Gu, C. Huang, R. Völkl, and H. Harada, September 2004, pp. 34-39.

"Powder Metallurgy—Key to Advanced Materials Technology" (Conference Review), F.H. Froes, January 1991, pp. 33, 34.

"Processing High-Temperature Refractory-Metal Silicide In-Situ Composites" (Overview), B.P. Bewlay, M.R. Jackson, and P.R. Subramanian, April 1999, pp. 32-36.

"Processing Intermetallic Composites by Self-Propagating, High-Temperature Synthesis" (Applied Technology), D.E. Alman, J.A. Hawk, A.V. Petty, Jr., and J.C. Rawers, March 1994, pp. 31-35.

"Processing Iron-Aluminide Composites Containing Carbides or Borides" (Overview), R. Subramanian and J.H. Schneibel, August 1997, pp. 50-54, 68.

"Producing Titanium Aluminide Foil from Plasma-Sprayed Preforms" (Research Summary), S.C. Jha and J.A. Forster, July 1993, pp. 57-59.

"Progress in the Understanding of Gamma Titanium Aluminides" (Overview), Y-W. Kim and D.M. Dimiduk, August 1991, pp. 40-47.

"The Reactive Processing of Silicides" (Overview), R. Radhakrishnan, S. Bhaduri, and C.H. Henager, Jr., January 1997, pp. 41-45.

"Recent Advances in High-Temperature Niobium Alloys" (Conference Review), J.J. Stephens, August 1990, pp. 22, 23.

"Recent Advances in the Thermohydrogen Processing of Titanium Alloys" (Overview), O.N. Senkov, J.J. Jonas, and F.H. Froes, July 1996, pp. 42-47.

"Recent Progress in the Coating Protection of Gamma Titanium-Aluminides" (Research Summary), C. Leyens, R. Braun, M. Fröhlich, and P.Eh. Hovsepian, January 2006, pp. 17-21.

"Refractory Metal-Intermetallic In-Situ Composites for Aircraft Engines" (Overview), B.P. Bewlay, J.J. Lewandowksi, and M.R. Jackson, August 1997, pp. 44, 45, 67.

"The Role of Competing Mechanisms inthe Fatigue-Life Variability of a Titanium and Gamma-TiAl Alloy" (Research Summary), S.K. Jha, J.M. Larsen, and A.H. Rosenberger, September 2005, pp. 50-54.

"The Strength Properties of Iron Aluminides" (Overview), K. Yoshimi and S. Hanada, August 1997, pp. 46-49.

"Synthesizing Gamma-TiAl Alloys by Reactive Powder Processing" (Research Summary), G. Wang and M. Dahms, May 1993, pp. 52-56.

"Ti and TiAl Powders by the Flash Reduction of Chloride Vapors" (Overview), H.Y. Sohn, September 1998, pp. 50-51.

"Toward a Better Understanding of Ruthenium Aluminide" (Overview), I.M. Wolff, January 1997, pp. 34-39.

"Understanding Fracture Toughness in Gamma TiAl" (Overview), K.S. Chan, May 1992, pp. 30-38.

"Using Material Behavior Models to Develop Process Control Strategies" (Overview), J.C. Malas and V. Seetharaman, June 1992, pp. 8-13.