"The Application of Expert Systems to Process Control" (Tutorial), B.P.F. Wu, January 1991, pp. 13-16.

"The Basics of the Intelligent Processing of Materials" (Overview), P.A. Parrish and W.G. Barker, July 1990, pp. 14-16.

"Biosensors Based on Piezoelectric Crystal Detector: Theory and Application" (Overview), A. Kumar, October 2000.

"Collecting and Analyzing Microstructures in Three Dimensions: A Fully Automated Approach" (Overview), J.E. Spowart, H.M. Mullens, and B.T. Puchala, October 2003, pp. 35-37.

"Computational Materials Science: A Powerful and Predictive Tool" (Commentary), Jeffrey Hoyt, September 2001, p. 14.

"Computational Materials Science and Materials Informatics: Glossary" (JOM-e: Speakers' Slides), K. Ferris, March 2007.

"The Computer-Aided Design and Manufacture of Sheet Metal Parts" (Forum Feature), R. Brandegger, July 1990, pp. 48-50.

"Control Aspects of the Mitsubishi Continuous Process" (Industrial Insight), M. Goto, E. Oshima, and M. Hayashi, April 1998, pp. 60-63, 65.

"Controlling Remelting Processes for Superalloys and Aerospace Ti Alloys" (Overview), D.K. Melgaard, R.L. Williamson, and J.J. Beaman, March 1998, pp. 13-17.

"Data Mining and Materials Informatics: A Primer" (JOM-e: Speakers' Slides), K. Rajan, March 2007.

"Data Organization and Knowledge Discovery" (JOM-e: Speakers' Slides), P. Mason, March 2007.

"Data Patterns and Links to Materials Theory: Theoretical Foundations for Heuristic Pattern Detection" (JOM-e: Speakers' Slides), K. Ferris, March 2007.

"Designing Modern Furnace Cooling Systems" (Design), J. Merry, J. Sarvinis, and N. Voermann, February 2000, pp. 62-64.

"Developing Composite Furnace Module Cooling Systems" (Overview), A.K. Kyllo, N.B. Gray, D. Papazoglou, and B.J. Elliot, February 2000, pp. 66-67.

"Developing Intelligent Control for Spray Forming Processes" (Overview), A.L. Moran and D.R. White, July 1990, pp. 21-24.

"Developing Sensors for Multifunctional Applications" (Commentary), A. Kumar and N.M. Ravindra, October 2000, p. 14.

"The Development of Aluminum Reduction Cell Process Control" (Overview), G.P. Bearne, May 1999, pp. 16—22.

"Developments in Physical Chemistry and Basic Principles" (1997 Review of Extraction & Processing), H.Y. Sohn and W.D. Cho, April 1997, pp. 40-44.

"The Direct Metal Deposition of H13 Tool Steel for 3-D Components" (Research Summary), J. Mazumder, J. Choi, K. Nagarathnam, J. Koch, and D. Hetzner, May 1997, pp. 55-60.

"Elements of Intelligent Process Control for Plasma Deposition" (Overview), H.P. Wang, E.M. Perry, R.D. Lillquist, and J.H. Taylor, January 1991, pp. 22-25.

"Emerging Sensors for the Intelligent Processing of Materials" (Commentary), J.C. Malas and S. Venugopal, September 1996, p. 15.

"Employing a New Bath- and Liquidus-Temperature Sensor for Molten Salts" (Applied Technology), P. Verstreken, November 1997, pp. 43-46.

"The Evolution of Technology for Structural Materials over the Last 50 Years" (Overview), J. Wadsworth, February 2007, pp. 41-47.

"Fine-Particle Characterization by Rietveld QXRD, CLM, and SEM-EDS Phase Mapping" (Overview), A.M. Hagni, December 2002, pp. 24-26.

"Improving Metallurgical Performance in Pyrometallurgical Processes" (Applied Technology), O.A. Bascur and J.P. Kennedy, December 2004, pp. 22-27.

"Improving the Quality of Continuous Copper Rod" (Overview), R. Adams and U. Sinha, May 1990, pp. 31-34.

"Inclusions in Molten Magnesium and Potential Assessment Techniques" (Overview), H. Hu and A. Luo, October 1996, pp. 47-51.

"Infrared Analysis of Thin-Film Materials" (Overview), P.A. Rosenthal, J. Xu, S. Charpenay, J.E. Cosgrove, and N.M. Ravindra, October 2000.

"The In-Situ Sensor-Guided Process Characterization of Advanced Composite Materials" (Testing & Analysis), R.M. Kent and M.J. Ruddell, September 1996, pp. 32-34.

"The Integration of Process and Cost Modeling—A Powerful Tool for Business Planning" (Overview), J. Szekely, J. Busch, and G. Trapaga, December 1996, pp. 43-47.

"The Intelligent Control of an Inert-Gas Atomization Process" Overview), S.A. Osella, S.D. Ridder, F.S. Biancaniello, and P.I. Espina, January 1991, pp. 18-21.

"An Intelligent Path to Quality—Process Monitoring and Control" (Featured Overview), S. Wen, January 1991, pp. 10-12.

"The Intelligent Processing of Materials: An Overview and Case Study" (Overview), H.N.G. Wadley and R. Vancheeswaran, January 1998, pp. 19-30.

"The Intelligent Supervisory Control of Submerged-Arc Furnaces" (Applied Technology), M.A. Reuter, C. Pretorius, C. West, P. Dixon, and M. Oosthuizen, December 1996, pp. 49-51.

"IPC and Hot-Dip Galvanizing: Enhancing Knowledge Transfer with Visual Modeling" (Overview), D.C. Schmidt, J. Haddock, W.A. Wallace, and R.N. Wright, January 1992, pp. 28-31.

"The Laser Forming of Metallic Components Using Particulate Materials" (Overview), D.M. Keicher and J.E. Smugeresky, May 1997, pp. 51-54.

"The Macroscale Simulation of Remelting Processes" (Research Summary), L.A. Bertram, P.R. Schunk, S.N. Kempka, F. Spadafora, and R. Minisandram, March 1998, pp. 18-21.

"Mass Balance Calculations in Copper Flash Smelting by Means of Genetic Algorithms" (Research Summary), V.M. Sanchez-Corrales, J.A. Valera-Gonzalez, P. Flores-Perez, and M. Perez-Tello, December 2004, pp. 29-32.

"Materials Informatics: Growing from the Bio World" (End Notes), Warren H. Hunt, Jr., July 2006, p. 88.

"The Materials Informatics Workshop: Theory and Application" (Conference Review), L.M. Peurrung, K. Ferris, and T.M. Osman, March 2007, pp. 50.

"Materials Informatics: Theory and Application (Introduction)" (JOM-e: Speakers' Slides), K. Rajan, March 2007.

"Materials and Processing Issues in Nanostructured Semiconductor Gas Sensors" (Overview), F. Cosandey, October 2000.

"Metal-Matrix Composites and IPM: A Modeling Perspective" (Research Summary), D. Backman, July 1990, pp. 17-20.

"The Microstructural Characterization of Sensors Based on Electronic Ceramic Materials" (JOM-e: Overview), P.I. Gouma, S.A. Akbar, and M.J. Mills, November 1998.

"The NDE Analysis of Tension Behavior in Nicalon/SiC Ceramic-Matrix Composites" (JOM-e: Overview), J. Kim, P.K. Liaw, and H. Wang, January 2003.

"NSDL Materials Digital Library Pathway" (JOM-e: Speakers' Slides), L. Bartolo, March 2007.

"An Optical Roughness Sensor for Real-Time Quality Measurement" (Research Summary), R.D. Payne, A.L. Moran, C.J. Madden, and P. Kelley, October 1991, pp. 18-21.

"Optimizing the Ring-Rolling Operation with Process Control" (Overview), U. Koppers, February 1992, pp. 24-27.

"Practical Applications of Nondestructive Materials Characterization" (Featured Overview), R.E. Green, Jr., October 1992, pp. 12-16.

"Reducing Defects in Remelting Processes for High-Performance Alloys" (Overview), J.A. Van Den Avyle, J.A. Brooks, and A.C. Powell, March 1998, pp. 22-25, 49.

"Sensor Principles and Methods for Measuring Physical Properties" (Overview), A.G. Jackson, S.J.P. Laube, and J. Busbee, September 1996, pp. 16-23.

"The Simulation of Acoustic Emission for Metal Forging" (Testing & Analysis), W.M. Mullins, R.D. Irwin, S. Venugopal, and J.C. Malas, September 1996, pp. 35-37.

"Software for Chemical and Extractive Metallurgy" (Conference Review), A.E. Morris, J.B. Stephenson and M.W. Wadsley, April 1990, pp. 35-37.

"Software for Process Analysis and Design," Sidebar to "Recycling of Metals and Engineered Materials" (Conference Review), A. Morris and D. Robertson, March 1996, p. 44.

"The Status of Chemical Sensors for Hot-Dip Galvanization" (Overview), J.W. Fergus, September 1996, pp. 38-41.

"The Status of Vision Expert Systems for Material Inspection" (Overview), C.Y. Han and W.G. Wee, July 1990, pp. 25-27.

"An Ultrasonic Sensor for High-Temperature Materials Processing" (Testing & Analysis), D.A. Stubbs and R.E. Dutton, September 1996, pp. 29-31.

"Understanding Management of Computational Process Modeling and Simulation" (Overview), M. Wadsley, December 2004, pp. 33-36.

"Using Chemical Sensors to Control Molten Metal Processing" (Overview), J.W. Fergus, October 2000.

"Using Fuzzy Sets to Assign Metallurgical Grades to Steel" (Applied Technology), L.R. Woodyatt, K.L. Stott, F.E. Wolf, and F.J. Vasko, February 1992, pp. 28-31.

"Using Material Behavior Models to Develop Process Control Strategies" (Overview), J.C. Malas and V. Seetharaman, June 1992, pp. 8-13.

"Using Ultrasonic Sensors for Powder Injection Molding" (Testing & Analysis), D.D. Hongerholt, J.L. Rose, and R.M. German, September 1996, pp. 24-28.

"Vertically Oriented Single-Wall Carbon Nanotube/Enzyme on Silicon as Biosensor Electrode" (Research Summary), Y. Wang and Z. Iqbal, June 2005, pp. 27-29.

"Waste Reduction through Process Optimization and Development" (Overview), B. Björkman, J. Eriksson, L. Nedar, and C. Samuelsson, March 1996, pp. 45-49.