"Advanced Refractory Metals and Composites for Extraterrestrial Power Systems" (Featured Overview), R.H. Titran and T.L. Grobstein, August 1990, pp. 8-10.

"Advances in Composite Materials for Thermal Management in Electronic Packaging" (Overview), C. Zweben, June 1998, pp. 47-51.

"Aerospace Propulsion System Materials in the Next 25 Years—Composites Take Off" (Economics), R.W. Bryant, December 1990, pp. 27-28.

"The Aging Response and Creep of DRA Composites" (Research Summary), M.B. House, K.C. Meinert, and R.B. Bhagat, August 1991, pp. 24-28.

"Aluminum Composite Materials for Multichip Modules" (Overview), M.K. Premkumar, W.H. Hunt, Jr., and R.R. Sawtell, July 1992, pp. 24-28.

"Aluminum Composites for Automotive Applications: A Global Perspective" (Overview), V.M. Kevorkijan, November 1999, pp. 54-58.

"Analyzing the Methods and Merits of Recycling Fiber Metal Laminates" (1996 Review of Extraction & Processing), E. Tempelman, W.L. Dalmijn, and A. Vlot, April 1996, pp. 62-64.

"The Application of X-Ray Computed Tomography to Materials Development" (Featured Overview), R.H. Bossi and G.E. Georgeson, September 1991, pp. 8-15.

"Applications of Fly Ash in Synthesizing Low-Cost MMCs for Automotive and Other Applications" (Overview), P.K. Rohatgi, D. Weiss, and N. Gupta, November 2006, pp. 71-76.

"The Automotive Application of Discontinuously Reinforced TiB-Ti Composites" (Overview), T. Saito, May 2004, pp. 33-36.

"Automotive Carbon Fiber: Opportunities and Challenges" (Overview), R.A. Sullivan, November 2006, pp. 77-79.

"Barriers to Applying Advanced High-Temperature Materials" (Overview), S. Mazdiyasni, January 1993, pp. 49-50.

"The Biomimetic Study of Composite Materials" (Overview), B.-L. Zhou, February 1994, pp. 57-62.

"A Brief History of Composites in the U.S.—The Dream and the Success" (Historical Insight), E.P. Scala, February 1996, pp. 45-48.

"Cast Aluminum-Matrix Composites for Automotive Applications" (Featured Overview), P. Rohatgi, April 1991, pp. 10-15.

"Ceramic-Composite Waste Forms from the Electrometallurgical Treatment of Spent Nuclear Fuel" (Research Summary), C. Pereira, M. Hash, M. Lewis, and M. Richmann, July 1997, pp. 34-37.

"Ceramic-Matrix Composites Fatigue and Fracture" (Research Summary), D.L. Davidson, October 1995, pp. 46-50, 81-82.

"Ceramics and Composites for Rocket Engines and Space Structures" (Featured Overview), K. Upadhya, May 1992, pp. 15-18.

"CermtTi^® Discontinuously Reinforced Ti-Matrix Composites: Manufacturing, Properties, and Applications>" (Overview), S. Abkowitz, S.M. Abkowitz, H. Fisher, and P.J. Schwartz, May 2004, pp. 37-41.

"CFCC Fatigue: A Literature Review" (Overview), N. Miriyala and P.K. Liaw, July 1997, pp. 59-66, 82.

"Challenges to Developing and Producing MMCs for Space Applications" (Overview), Joseph M. Kunze and Clifford C. Bampton, April 2001, pp. 22-25. 6

"Clay-Epoxy Nanocomposites: Processing and Properties" (Research Summary), N. Gupta, March 2007, pp. 61-65.

"Coating and Fiber Effects on SiC-Reinforced Titanium" (Overview), D. Upadhyaya, M. Wood, C.M. Ward-Close, P. Tsakiropoulos, and F.H. Froes, November 1994, pp. 62-67.

"Coating Ceramic Composites by a Laser In-Situ Reaction Technique" (Research Summary), N.B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay, October 1995, pp. 51-53.

"Co-Continuous Composite Materials for Friction and Braking Applications" (Overview), G.S. Daehn and M.C. Breslin, November 2006, pp. 87-91.

"The Combustion Synthesis of Advanced Materials" (Research Summary), J.J. Moore, D.W. Readey, H.J. Feng, K. Monroe, and B. Mishra, November 1994, pp. 72-78.

"The Commercial Application of Low-Cost Titanium Composites" (Overview), S. Abkowitz, P.F. Weihrauch, S.M. Abkowitz, and H.L. Heussi, August 1995, pp. 40-41.

"Composite Interfacial Reactions" (Commentary), R.Y. Lin, March 1993, p. 20.

"The Composites Fracture Symposium" (Conference Review), R.B. Bhagat, May 1994, p. 48.

"Composites Have Merit: A New Boy Scout Badge Focuses on Materials" (End Notes), K. Roncone, November 2006, p. 104.

"Continuous-Fiber Reinforced Al Composites: A New Generation" (Overview), H.E. Deve and C. McCullough, July 1995, pp. 33-37.

"Continuous Fiber-Reinforced Titanium Aluminide Composites" (Overview), R.A. MacKay, P.K. Brindley, and F.H. Froes, May 1991, pp. 23-29.

"Corrosion Behavior of Copper-Based Metal-Matrix Composites" (Research Summary), H. Sun, J.E. Orth, and H.G. Wheat, September 1993, pp. 36-41.

"The Creep Behavior of Discontinuously Reinforced Metal-Matrix Composites" (Overview), Y. Huang and T.G. Langdon, January 2003, pp. 15-20.

"The Creep of Intermetallics and Their Composites" (Research Summary), K. Sadananda and C.R. Feng, May 1993, pp. 45-48.

"The Creep Behavior of Si₃N₄/SiC Nanocomposites" (Research Summary), J. Wan and A.K. Mukherjee, January 2003, pp. 28-33.

"Creep Deformation in Multilayered and Microlaminate Materials" (Research Summary), A.C. Lewis, D. Van Heerden, D. Josell, and T.P. Weihs, January 2003, pp. 34-37.

"Creep in Multi-Component Materials Systems" (Commentary), I. Dutta, January 2003, p. 14.

"Critical Property Evaluation of High-Temperature Composites: A Case Study in Materials Design" (Overview), D.A. Woodford, November 1990, pp. 50-55.

"The CVD Coating of Fibers for Composite Materials" (Overview), M.K. Alam and S.C. Jain, November 1990, pp. 56-58.

"The Cyclic Fatigue of High-Performance Fibers" (Overview), M. Kerr, N. Chawla, and K.K. Chawla, February 2005, pp. 67-71.

"The Damping Performance of Aluminum-Based Composites" (Research Summary), C.A. Updike, R.B. Bhagat, M.J. Pechersky and M.F. Amateau, March 1990, pp. 42-46.

"Deformation and Fracture of Ti- and Ti₃Al-Matrix Composites" (Overview), J.-M. Yang and S.M. Jeng, June 1992, pp. 52-57.

"Determining Material Properties of Metal-Matrix Composites by NDE" (Research Summary), P.K. Liaw, R.E. Shannon, W.G. Clark, Jr., W.C. Harrigan, Jr., H. Jeong, and D.K. Hsu, October 1992, pp. 36-40.

"Developing Hybrid Polymer Composites with Embedded Shape-Memory Alloy Wires" (Overview), P. Sittner and R. Stalmans, October 2000, pp. 15-20.

"Developing Impact and Fatigue Prognosis Solutoins for Composites" (Overview), C. Farrar, F. Hemez, G. Park, A. Robertson, H. Sohn, and T. Williams, March 2004, pp. 40-42.

"The Development of Composite Plating for Advanced Materials" (Overview), J.R. Roos, J.P. Celis, J. Fransaer and C. Buelens, November 1990, pp. 60-63.

"The Development of Metal-Based Smart Composites" (Overview), H. Asanuma, October 2000, pp. 21-25.

"Developments in the Processing and Properties of Particulate Al-Si Composites" (Overview), J.U. Ejiofor and R.G. Reddy, November 1997, pp. 31-37.

"Discontinuously Reinforced Aluminum: Ready for the 1990s" (Commentary), P.S. Gilman, August 1991, p. 7.

"Electromigration and the Electroplastic Effect in Aluminum SiC MMCs" (Research Summary), N.G. Dariavach and J.A. Rice, May 2000, pp. 40-42.

"Elevated-Temperature Effects of Oxygen on SiC/SiC Composites" (Research Summary), R.H. Jones, C.H. Henager, Jr., and P.F. Tortorelli, December 1993, pp. 26-29.

"Emerging Technologies for the In-Situ Production of MMCs" (Overview), M.J. Koczak and M.K. Premkumar, January 1993, pp. 44-48.

"Environmental Effects on Ductile-Phase Toughening in Nb₅Si₃-Nb Composites" (Research Summary), J.D. Rigney, P.M. Singh, and J.J. Lewandowski, August 1992, pp. 36-41.

"Evaluating the Mechanical Properties of Commercial DRA" (Research Summary), M.G. McKimpson, E.L. Pohlenz, and S.R. Thompson, January 1993, pp. 26-29.

"Expanding the Application of Ceramic-Matrix Composites" (Commentary), P.K. Liaw, October 1995, p. 29.

"Expanding World Markets for MMCs" (Economics), M.N. Rittner, November 2000, p. 43.

"The Fabrication and Creep Properties of Superalloy-Zirconia Composites" (Research Summary), R.K. Oruganti and A.K. Ghosh, January 2003, pp. 21-27.

"The Fabrication and Thermomechanical Behavior of Al and Ti SMA Composites" (Research Summary), K. Mizuuchi, October 2000, pp. 26-31.

"The Failure of Fiber-Reinforced Ceramic-Matrix Composites Under Dynamic Loading" (Research Summary), J. Lankford, May 1995, pp. 64-68.

"Fiber Pushout and Interfacial Shear in Metal-Matrix Composites" (Testing & Analysis), D.A. Koss, J.R. Hellmann, and M.N. Kallas, March 1993, pp. 34-37.

"Fiber-Reinforced CMCs: Processing, Mechanical Behavior, and Modeling" (Overview), P.K. Liaw, October 1995, pp. 38-44.

"Finding Inspiration in Argiope Trifasciata Spider Silk Fibers" (Overview), M. Elices, J. Perez-Rigueiro, G.R. Plaza, and G.V. Guinea, February 2005, pp. 60-66.

"The Fracture Resistance and Crack-Tip Micromechanics of In-Situ Intermetallic Composites" (Research Summary), K.S. Chan and D.L. Davidson, September 1996, pp. 62-67.

"Fundamental Relationships in Metal-Matrix Composites" (Conference Review), M.N. Gungor and P.K. Liaw, March 1990, pp. 34-35.

"High-Performance Composites: Commonalty of Phenomena" (Conference Review), K.K. Chawla, P.K. Liaw, and S.G. Fishman, February 1996, pp. 43-44.

"High-Performance Fiber Reinforcements in Composites" (Commentary), K.K. Chawla, February 2005, pp. 47.

"High-Strain-Rate Superplasticity in Aluminum-Matrix Composites" (Overview), T.R. Bieler, R.S. Mishra, and A.K. Mukherjee, February 1996, pp. 52-57.

"The High-Temperature Application of Ceramic-Matrix Composites" (Overview), K.K. Chawla, December 1995, pp. 19-21.

"High-Temperature Deformation Behavior of Ti-TiB_w In-Situ Metal-Matrix Composites" (Research Summary), S. Kumari, N. Eswara Prasad, K.S. Ravi Chandran, and G. Malakondaiah, May 2004, pp. 51-55.

"High-Temperature Discontinuously Reinforced Aluminum" (Research Summary), M.S. Zedalis, J.D. Bryant, P.S. Gilman, and S.K. Das, August 1991, pp. 29-31.

"High-Temperature Refractory Metal-Intermetallic Composites" (Overview), M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, and H.A. Lipsitt, January 1996, pp. 39-44.

"Highlights from the Annual Conference of Metallurgists" (Conference Review), D. Poggi, P. Hancock, M. Reist and L. St. Arnaud, June 1990, p. 32.

"The Infrared Infiltration and Joining of Advanced Materials" (Applied Technology), R.Y. Lin, S.G. Warrier, C.A. Blue, C.C. Chen, C.A. Eppich, and R.A. Blue, March 1994, pp. 26-30.

"Innovations in the Processing of Inorganic Composites" (Conference Review), S.G. Fishman, November 1990, pp. 48-49.

"The In-Situ Sensor-Guided Process Characterization of Advanced Composite Materials" (Testing & Analysis), R.M. Kent and M.J. Ruddell, September 1996, pp. 32-34.

"The Intelligent Processing of Materials: An Overview and Case Study" (Overview), H.N.G. Wadley and R. Vancheeswaran, January 1998, pp. 19-30.

"Interconnected Metal-Ceramic Composites by Chemical Means" (Research Summary), E.D. Rodeghiero, O.K. Tse, and E.P. Giannelis, March 1995, pp. 26-28.

"Interfacial Creep in Multi-Component Material Systems" (Overview), I. Dutta, K.A. Peterson, and C. Park, January 2003, pp. 38-43.

"Ion Microprobe Investigations of Interfacial Phenomena in Composites" (Testing & Analysis), K.K. Soni, J.M. Chabala, R. Mogilevsky, R. Levi-Setti, M.W. Tseng, and D.B. Williams, March 1993, pp. 29-33.

"Key Methods for Developing Single-Wall Nanotube Composites" (Overview), E.V. Barrera, November 2000, p. 38-42.

"The Large-Scale Commercialization of Aluminum-Matrix Composites" (Industrial Insight), T.F. Klimowicz, November 1994, pp. 49-53.

"Laser Surface Modification of Zinc-Base Composites" (Applied Technology), N.B. Dahotre, T.D. McCay and M.H. McCay, June 1990, pp. 44-47.

"LiMAT-93: Light Materials for Transportation Systems" (Conference Review), N.J. Kim and D.H. Kim, November 1994, pp. 44-47.

"Low-Cost, Fly-Ash-Containing Aluminum-Matrix Composites" (Overview), P.K. Rohatgi, November 1994, pp. 55-59.

"Low-Cost Composites in Automotive and Heavy Vehicle Manufacture" (Commentary), G. Grant, November 2006, p. 66.

"Low-Thermal-Expansion Copper Composites via Negative CTE Metallic Elements" (Design), H. Mavoori and S. Jin, June 1998, pp. 70-72.

"A Macrocomposite Al Brake Rotor for Reduced Weight and Improved Performance" (Overview), S.X. Huang and K. Paxton, August 1998, pp. 26-28.

"The Mechanical Behavior of GLARE Laminates for Aircraft Structures" (Overview), G. Wu and J.-M. Yang, January 2005, pp. 72-79.

"The Mechanical Behavior of In-Situ NiAl-Refractory Metal Composites" (Overview), J.-M. Yang, August 1997, pp. 40-43.

"The Mechanical Behavior of Multiphase Nanocrystalline Materials" (Overview), C. Koch, K.L. Murty, and R.O. Scattergood, March 2007, pp. 66-70.

"The Mechanical Milling of Al-TiO₂ Composite Powders" (Research Summary), D.L. Zhang, Z.H. Cai, and G. Adam, February 2004, pp. 53-56.

"The Mechanical Properties of In-Situ Composites" (Overview), R.M. Aikin, Jr., August 1997, pp. 35-39.

"The Mechanical Properties of In-Situ Composites: An Introduction and Speculation" (Commentary), D.L. Davidson, August 1997, p. 34.

"Metallic Composites in Space: A Status Report" (Commentary), Dan Miracle, April 2001, p. 12.

"Metal- and Intermetallic-Matrix Composites for Aerospace Propulsion and Power Systems" (Overview), J. Doychak, June 1992, pp. 46-51.

"Metal-Matrix Composites and IPM: A Modeling Perspective" (Research Summary), D. Backman, July 1990, pp. 17-20.

"Metal-Matrix Composites for Electronic Packaging" (Overview), C. Zweben, July 1992, pp. 15-23. (Correction printed in November 1992, p. 67.)

"Metal-Matrix Composites for Liquid Rocket Engines" (Overview), J.S. Shelley, R. LeClaire, and J. Nichols, April 2001, pp. 18-21.

"Metal-Matrix Composites for Space Applications" (Overview), Suraj Rawal, April 2001, pp. 14-17.

"Metal-Matrix Composites in the Automotive Industry: Opportunities and Challenges" (Overview), J.E. Allison and G.S. Cole, January 1993, pp. 19-24.

"Metal-Matrix Composites in Ground Transportation" (Overview), N. Chawla and K.K. Chawla, November 2006, pp. 67-70.

"Metals, Composites and Ceramics—The Distinctions Are Rapidly Disappearing" (Forum Feature), P.T.B. Shaffer, December 1990, p. 49.

"Micro- and Macrostructural Factors in DRA Fracture Resistance" (Overview), W.H. Hunt, Jr., T.M. Osman, and J.J. Lewandowski, January 1993, pp. 30-35.

"The Micromechanical Modeling of Polymeric Composites" (Overview), T.-W. Chou, S.L. Phoenix, and J.A. Nairn, September 1996, pp. 53-57.

"MMCs for Automotive Engine Applications" (Economics), C.G.E. Mangin, J.A. Isaacs, and J.P. Clark, February 1996, pp. 49-51.

"A Model for Predicting Micromechanical Interfacial Adhesion in Polymer Composites" (Testing & Analysis), H.F. Wu, W. Gu, and G.-Q. Lu, September 1996, pp. 58-61.

"Modeling the Micromechanical Aspects of Composites" (Commentary), P.K. Liaw and N. Yu, September 1996, p. 43.

"The Monotonic and Fatigue Behavior of CFCCs" (Overview), N. Miriyala and P.K. Liaw, September 1996, pp. 44-52.

"Nanoscale Structural and Mechanical Characterization of Natural Nanocomposites: Seashells" (Overview), X. Li, March 2007, pp. 71-74.

"NASA's High-Temperature Engine Materials Program for Civil Aeronautics" (Overview), H.R. Gray and C.A. Ginty, May 1992, p. 12.

"Natural-Fiber-Reinforced Polymer Composites in Automotive Applications" (Overview), J. Holbery and D. Houston, November 2006, pp. 80-86.

"New Technologies…New Composites" (Commentary), E.V. Barrera and K. Lozano, November 2000, p. 32.

"Ni-Ti SMA-Reinforced Al Composites" (Research Summary), G.A. Porter, P.K. Liaw, T.N. Tiegs, and K.H. Wu, October 2000, pp. 52-56.

"Novel Alumina Titanium-Carbonitride Nickel Composites" (Research Summary), P. Bowen, C. Bonjour, C. Carry, D. Gonseth, H. Hofmann, D. Mari, R. Mulone, and P. Streit, November 1995, pp. 56-58.

"The Oxidation Resistance of MoSi₂ Composites" (Research Summary), E.W. Lee, J. Cook, A. Khan, R. Mahapatra, and J. Waldman, March 1991, pp. 54-57.

"Oxide Fibers for High-Temperature Reinforcement and Insulation" (Overview), A.R. Bunsell, February 2005, pp. 48-51.

"Plasma-Spray Forming Ceramics and Layered Composites" (Research Summary), S. Sampath, R. Gansert, and H. Herman, October 1995, pp. 30-33.

"Plasma Spray Forming Metals, Intermetallics, and Composites" (Overview), S. Sampath and H. Herman, July 1993, pp. 42-49.

"Polycrystalline Diamond Fibers for Metal-Matrix Composites" (Applied Technology), H.-M. Ting and M.L. Lake, March 1994, pp. 23-25.

"Polymer Nanocomposites: A Small Part of the Story" (Overview), L.S. Schadler, L.C. Brinson, and W.G. Sawyer, March 2007, pp. 53-60.

"The Potential for CMCs to Replace Superalloys in Engine Exhaust Ducts" (Design), R. Roth, J.P. Clark, and F.R. Field III, January 1994, pp. 32-35.

"Practical Applications of Nondestructive Materials Characterization" (Featured Overview), R.E. Green, Jr., October 1992, pp. 12-16.

"Preparing Damage-Tolerant Titanium-Matrix Composites" (Research Summary), R.J. Lederich, W.O. Soboyejo, and T.S. Srivatsan, November 1994, pp. 68-71.

"Pressure-Infiltration Processing of Reinforced Aluminum" (Tutorial), A. Mortensen, V.J. Michaud, and M.C. Flemings, January 1993, pp. 36-43.

"A Process to Recover Carbon Fibers from Polymer-Matrix Composites in End-of-Life Vehicles" (Overview), B.J. Jody, J.A. Pomykala, Jr., E.J. Daniels, and J. Greminger, August 2004, pp. 43-47.

"The Processing and Evaluation of Clad Metals" (Overview), J.A. Forster, S. Jha, and A. Amatruda, June 1993, pp. 35-38.

"The Processing and Properties of a Nylon 6/Clay Hybrid" (Forum Features), A. Okada, March 1993, p. 71. (Correction printed in August 1993, p. 69.)

"The Processing and Properties of Discontinuously Reinforced Aluminum Composites" (Featured Overview), A.L. Geiger and J.A. Walker, August 1991, pp. 8-15.

"Processing Ceramic-Matrix Composites Using Electrophoretic Deposition" (Research Summary), A.R. Boccaccini and C.B. Ponton, October 1995, pp. 34-37.

"Processing High-Temperature Refractory-Metal Silicide In-Situ Composites" (Overview), B.P. Bewlay, M.R. Jackson, and P.R. Subramanian, April 1999, pp. 32-36.

"Processing Intermetallic Composites by Self-Propagating, High-Temperature Synthesis" (Applied Technology), D.E. Alman, J.A. Hawk, A.V. Petty, Jr., and J.C. Rawers, March 1994, pp. 31-35.

"Processing Iron-Aluminide Composites Containing Carbides or Borides" (Overview), R. Subramanian and J.H. Schneibel, August 1997, pp. 50-54, 68.

"The Processing, Properties, and Structure of Carbon Fibers" (Overview), M. Minus and S. Kumar, February 2005, pp. 52-58.

"The Properties and Application of Scandium-Reinforced Aluminum" (Overview), Z. Ahmad, February 2003, pp. 35-39.

"The Prospects for Hybrid Fiber-Reinforced Ti-TiB-Matrix Composites" (Overview), W. Hanusiak, C.F. Yoldon, J. Fields, V. Hammond, and R. Grabow, May 2004, pp. 49-50.

"Prototype Analysis of Gravity-Modulated Welding by Inverting Weld Cross Sections" (Research Summary), K.P. Cooper, S.G. Lambrakos, and H.N. Jones III, June 2003, pp. 21-26.

"The Recycling and Reclamation of Metal-Matrix Composites" (Overview), D.M. Schuster, M.D. Skibo, R.S. Bruski, R. Provencher, and G. Riverin, May 1993, pp. 26-30.

"Reactive Liquid Processing in Composites Production" (Commentary), A. Bronson, June 1997, p. 47.

"The Reactive Liquid Processing of Ceramic-Metal Composites" (Overview), C. Odegard and A. Bronson, June 1997, pp. 52-54.

"Recent Developments in Ceramic Nanocomposites" (Overview), S. Bhaduri and S.B. Bhaduri, January 1998, pp. 44-51.

"Redefining the Limits of Aluminum-Based Materials" (Commentary), W.H. Hunt, Jr., January 1993, p. 18.

"Refractory Ceramic-Composite Coatings via Laser Surface Engineering" (Research Summary), N.B. Dahotre and A. Agarwal, April 1999, pp. 19-21.

"Refractory Metal-Intermetallic In-Situ Composites for Aircraft Engines" (Overview), B.P. Bewlay, J.J. Lewandowksi, and M.R. Jackson, August 1997, pp. 44-45, 67.

"Rheocasting a Zn-Al Composite Reinforced with Coke Dust" (Research Summary), A. Madroñero, J. Cruz, C. Foruria, and J. Coleto, January 1997, pp. 46-49.

"Scaling Up Particulate-Reinforced Aluminum Composites for Commercial Production" (Research Summary), W.C. Harrigan, Jr., August 1991, pp. 32-35.

"The Science and Technology of Advanced Structural Ceramics" (Overview), S.B. Bhaduri and F.H. Froes, May 1991, pp. 16-22.

"The Semi-Solid Processing of Alloys and Composites" (Conference Review), C. Levaillant and M. Suery, December 1990, p. 26.

"Solidification and Liquidation Cracking Issues in Welding" (Overview), Sindo Kou, June 2003, pp. 37-40.

"The Solidification of Metal-Matrix Particulate Composites" (Overview), P. Rohatgi and R. Asthana, May 1991, pp. 35-41. (Note: A correction appears in July 1991, p. 58.)

"The Solidification Processing of Metal-Matrix Composites: The Rohatgi Symposium" (Conference Review), N. Gupta and K.G. Satyanarayana, November 2006, pp. 92-94.

"Solidification Science in Cast MMCs" (Industrial Insight), Pradeep Rohatgi and Rajiv Asthana, September 2001, pp. 9-13.

"Spray-Atomized and Codeposited 6061 Al/SiC_p Composites" (Research Summary), J. Wu and E.J. Lavernia, August 1991, pp. 16-23.

"The Stability of Interfaces in High-Temperature Metal-Matrix Composites" (Overview), J.A. DeKock and Y.A. Chang, March 1993, pp. 21-23.

"The Status of HYMATs—A New Category of Hybrid Materials" (Featured Overview), W.E. Frazier, M.E. Donnellan, P. Architetto, and R. Sands, May 1991, pp. 10-15.

"The Status of Metal-Matrix Composite Research and Development in Japan" (Featured Overview), A. Mortensen and M.J. Koczak, March 1993, pp. 10-18.

"Structural Biological Composites: An Overview" (Overview), Marc A. Meyers, Albert Y.M. Lin, Yasuaki Seki, Po-Yu Chen, Bimal K. Kad, and Sara Bodde, July 2006, pp. 35-41.

"The Structure and Properties of Magnesium-Matrix Composites" (Research Summary), M.R. Krishnadev, R. Angers, C.G. Krishnadas Nair, and G. Huard, August 1993, pp. 52-54.

"Superplasticity and Superplastic Forming of Aluminum Metal-Matrix Composites" (Overview), T.G. Nieh and J. Wadsworth, November 1992, pp. 46-50.

"The Synthesis and Properties of Zr-Based Metallic Glasses and Glass-Matrix Composites" (Research Summary), M. Heilmaier and J. Eckert, July 2000, pp. 43-47.

"The Thermal Plasma Near-Net-Shape Spray Forming of Al Composites" (Research Summary), M. Smagorinski, P. Tsantrizos, S. Grenier, M. Entezarian, and F. Ajersch, June 1996, pp. 56-59.

"Titanium-Boron Alloys and Composites: Processing, Properties, and Applications" (Commentary), K.S. Ravi Chandran and D.B. Miracle, May 2004, pp. 33-36.

"TiB_w-Reinforced Ti Composites: Processing, Properties, Application Prospects, and Research Needs" (Overview), K.S. Ravi Chandran, K.B. Panda, and S.S. Sahay, May 2004, pp. 42-48.

"The Transient Plastic Phase Processing of Ceramic-Ceramic Composites" (Overview), M. Barsoum, A. Zavaliangos, S. Kalidindi, T. El-Raghy, and D. Brodkin, November 1995, pp. 52-55.

"The U.S. Ceramic-Matrix Composites Market in the 1990s" (Economics), T. Abraham, June 1992, pp. 44-45.

"Using Coated Ceramic Particles to Increase Wear Resistance in High-Speed Steels" (Research Summary), C. Jouanny-Tresy, M. Vardavoulias, and M. Jeandin, April 1995, pp. 26-30.

"Using Rapid Infrared Forming to Control Interfaces in Titanium-Matrix Composites" (Overview), S.G. Warrier and R.Y. Lin, March 1993, pp. 24-27.

"Vapor-Grown Carbon-Fiber Composites: Processing and Electrostatic Dissipative Applications" (Overview), K. Lozano, November 2000, pp. 34-36.

"Weld Analysis Using an Inverse-Problem Approach Based on Quasi-One-Dimensional Interpolation" (Research Summary), S.G. Lambrakos, J.O.Milewski, and P.G. Moore, June 2003, pp. 27-36.

"Wetting in Nonreactive Liquid Metal-Oxide Systems" (Overview), B.M. Gallois, June 1997, pp. 48-51.

"Zirconium-Based Composites for Orthopedic Applications" (Research Summary), V.A. Ravi, T.D. Claar, B. Berelsman, and J. Higgins, February 1994, pp. 50-52. (Correction printed in October 1994, p. 68.)