"Accurately Determining Eutectic Compositions: The Sn-Ag-Cu Ternary Eutectic" (Research Summary), K.-W. Moon and W.J. Boettinger, April 2004, pp. 22-27.

"Advanced Materials II: Ultrafine-Grained Materials" (Commentary), P.K. Liaw, March 2001, p. 30.

"Advanced Sensors for Multifunctional Applications" (Overview), D.V. Ivanov, October 2000.

"Advancements in MEMS Materials and Processing Technology" (Overview), J.D. Olivas and S. Bolin, January 1998, pp. 38-43.

"Advances in Processing and Characterizing Bi-Based Superconductors" (Overview), U. Balachandran, R. Jammy, M. Chudzik, A.N. Iyer, and P. Haldar, October 1996, pp. 19-23.

"The Aging Response and Creep of DRA Composites" (Research Summary), M.B. House, K.C. Meinert, and R.B. Bhagat, August 1991, pp. 24-28.

"Analyzing Semiconductor Devices Using Modulation Spectroscopy" (Overview), F.H. Pollak, H. Qiang, D. Yan, Y. Yin, and W. Krystek, September 1994, pp. 55-59.

"Analyzing Superplastic Microstructures Using Interactive EBSP Methods" (Testing & Analysis), T.R. McNelley and M.E. McMahon, February 1996, pp. 58-60.

"Ancient Iron and Bronze Pieces from La Tejada: Characterization Studies" (Archaeotechnology), J.M. Gómez de Salazar, M.I. Barrena, and A. Soria, June 2004, pp. 14-16.

"The Application of Neutron Diffraction ot Engineering Problems" (Overview), X.-L. Wang, March 2006, pp. 52-57.

"Applications for Grain Boundary Engineered Materials" (Overview), G. Palumbo, E.M. Lehockey, and P. Lin, February 1998, pp. 40-43.

"JOM-e: The Application of Nondestructive Evaluation Technologies" (Commentary), P.K. Liaw, January 2003, pp. 10-11.

"The Application of Orientation Imaging Microscopy" (Overview), T.A. Mason and B.L. Adams, October 1994, pp. 43-45.

"The Application of Scanning Probe Microscopy in Materials Science Studies" (Commentary), B.D. Huey and W. Sigmund, January 2007, p. 11.

"The Application of X-Ray Computed Tomography to Materials Development" (Featured Overview), R.H. Bossi and G.E. Georgeson, September 1991, pp. 8-15.

"Applying Nanostructured Materials to Future Gas Turbine Engines" (Overview), M. Gell, October 1994, pp. 30-34.

"Aspects of Structural Evolution of Lead-Free Solder Joints" Research Summary), A. Zribi, R. Kinyanjui, P. Borgensen, L. Zavalij, and E.J. Cotts, June 2002, pp. 38-40.

"The Automated Measurement of Strains from Three-Dimensional Deformed Surfaces" (Featured Overview), J.H. Vogel and D. Lee, February 1990, pp. 8-13.

"Benchmark Testing the Flow and Solidification Modeling of Al Castings" (Overview), B. Sirrell, M. Holliday, and J. Campbell, March 1996, pp. 20-23.

" Biosensors Based on Piezoelectric Crystal Detector: Theory and Application" (Overview), A. Kumar, October 2000.

"Carbon-Containing Single-Crystal Nickel-Based Superalloys: Segregation Behavior and Carbide Formation" (Research Summary), K.A. Al-Jarba and G.E. Fuchs, September 2004, pp. 50-55.

"Carbon Nanotubes and Other Fullerene-Related Nanocrystals in the Environment: A TEM Study" (Research Summary), L.E. Murr, K.F. Soto, E.V. Esquivel, J.J. Bang, P.A. Guerrero, D.A. Lopez, and D.A. Ramirez, June 2004, pp. 28-31.

"The Characterization of Complex Heterostructure Materials" (Commentary), J.M. Parsey, Jr., September 1994, p. 49.

"The Characterization of Continuous Hot-Dip Galvanized and Galvannealed Steels" (Overview), S. Dionne, March 2006, pp. 32-40.

"Characterizing Aluminum Sintering Using In-Situ NDE" (Research Summary), J.C. Foley and D.K. Rehbein, May 2000, pp. 38-39.

"Characterizing the Deformation of Cold-Rolled Copper Sheet" (Testing & Analysis), K.J. Kozaczek, C.O. Ruud, J.C. Conway, Jr. and C.-J. Yu, May 1990, pp. 35-38.

"Characterizing and Etching Blue-Light Emitting Semiconductor Materials" (Commentary), J.M. Parsey, Jr., and M.S. Goorsky, August 1996, p. 45.

"Characterizing Gold in Refractory Sulfide Gold Ores and Residues" (Overview), T.T. Chen, L.J. Cabri, and J.E. Dutrizac, December 2002, pp. 20-22.

"Characterizing Megascopic Textures in Fluorospar Ores at Okorusu Mine" (Overview), R.D. Hagni and P.A. Shivdasan, April 2000, pp. 17-19.

"Characterizing the Microstructure of Interfaces in Y-123 Thin Films" (Testing & Analysis), A.F. Marshall, March 1995, pp. 43-46.

"Characterizing Nanostructured Magnetic Materials with Photonic Probes" (JOM-e: Overview), D.J. Keavney and C.M. Falco, June 2000.

"Characterizing Particles in Airborne Dust by Image Analysis" (1997 Review of Extraction & Processing), W. Petruk and H.C.W. Skinner, April 1997, pp. 58-61.

"Characterizing the Physical and Chemical Properties of Aluminum Dross" (Research Summary), O. Manfredi, W. Wuth, and I. Bohlinger, November 1997, pp. 48-51.

"Characterizing Solute-Lean Defects in Superalloys" (Overview), E. Samuelsson, J.A. Domingue and G.E. Maurer, August 1990, pp. 27-30.

"Characterizing the Textural Features of Gold Ores for Optimizing Gold Extraction" (Overview), D.M. Hausen, April 2000, pp. 14-16.

"Characterizing III-V Heteroepitaxial Structures" (Overview), R.S. Rai and C.A. Parsons, September 1994, pp. 50-54.

"Chromium and Chromium-Based Alloys: Problems and Possibilities for High-Temperature Service" (Overview), Y.F. Gu, H. Harada, and Y. Ro, September 2004, pp. 28-33.

"Collecting and Analyzing Microstructures in Three Dimensions: A Fully Automated Approach" (Overview), J.E. Spowart, H.M. Mullens, and B.T. Puchala, October 2003, pp. 35-37.

"Collecting and Characterizing Atmospheric Nanoparticles" (Overview), J.J. Bang and L.E. Murr, December 2002, pp. 28-30.

"Comparing Hydrogen Testing Methods for Wrought Aluminum" (Testing & Analysis), X.-G. Chen, F.-J. Klinkenberg, S. Engler, L. Heusler, and W. Schneider, August 1994, pp. 34-38.

"Computed Tomography Part I: Introduction and Industrial Applications" (Featured Overview), D.C. Copley, J.W. Eberhard, and G.A. Mohr, January 1994, pp. 14-26.

"Computed Tomography Part II: The Practical Use of a Single Source and Detector" (Featured Overview), J.C. Elliott, P. Anderson, G.R. Davis, F.W.L. Wong, and S.D. Dover, March 1994, pp. 11-19.

"Computed Tomography Part III: Volumetric, High-Resolution X-Ray Analysis of Fatigue Crack Closure" (Research Summary), S.R. Stock, A. Guvenilir, T.M. Breunig, J.H. Kinney, and M.C. Nichols, January 1995, pp. 19-23.

"Computer-Assisted Image Analysis in Quantitative Fractography" (Overview), J.C. Russ, October 1990, pp. 16-19.

"The Continuing Study of Damascus Steel: Bars from the Alwar Armory" (Archaeotechnology), J.D. Verhoeven, A.H. Pendray, and W.E. Dauksch, September 2004, pp. 17-20.

"Continuous Bath Temperature Measurements in Al Electrolysis Cells" (Testing & Analysis), Qiu Z., Li J., Cui X., K. Grjotheim, H. Kvande, and H.A. Øye, August 1994, pp. 28-30.

"Correlating Texture and Plastic Anisotropy in Rolled Brass" (Research Summary), J.A. Szpunar and D.C. Hinz, May 1990, pp. 40-43.

"Critical Property Evaluation of High-Temperature Composites: A Case Study in Materials Design" (Overview), D.A. Woodford, November 1990, pp. 50-55.

"Damage Integral Analysis of Solder Joint Fatigue" (Design), J. McGroarty, R. Subrahmanyan, and C-Y. Li, June 1991, pp. 16-20.

"The Deformation of Low-Stacking-Fault-Energy Austenitic Steels" (Overview), I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, and H.J. Maier, July 2002, pp. 31-37.

"Deformation Mechanisms and Tensile Superplasticity in Nanocrystalline Materials" (Overview), R.S. Mishra, S.X. McFadden, R.Z. Valiev, and A.K. Mukherjee, January 1999, pp. 37-40.

"Dendrite Growth Directions and Morphology in the Directional Solidification of Anisotropic Materials" (Overview), A. Pocheau, J. Deschamps, and M. Georgelin, July 2007, pp. 71-76.

"Design Guidelines for Processing Bi-Material Components via Powder-Injection Molding" (Design), J.L. Johnson, L.K. Tan, P. Suri, and R.M. German, October 2003, pp. 30-34.

"Determining Material Properties of Metal-Matrix Composites by NDE" (Research Summary), P.K. Liaw, R.E. Shannon, W.G. Clark, Jr., W.C. Harrigan, Jr., H. Jeong, and D.K. Hsu, October 1992, pp. 36-40.

"Developing Sensors for Multifunctional Applications" (Commentary), A. Kumar and N.M. Ravindra, October 2000, p. 14.

"Development of a Simulated Bird-Strike Test Method" (Research Summary), G.N. Colvin and J.R. Falls, May 1990, pp. 26-29.

"Diagnostic Microbeam Technology in Gold Ore Processing" (Overview), S. Chryssoulis, R. Dunne, and A. Coetzee, July 2004, pp. 53-57.

"A Diffusion-Multiple Approach for Mapping Phase Diagrams, Hardness, and Elastic Modulus" (Overview), J.-C. Zhao, M.R. Jackson, L.A. Peluso, and L.N. Brewer, July 2002, pp. 42-45.

"The Dry Etching of Group III-Nitride Wide-Bandgap Semiconductors" (Overview), H.P. Gillis, D.A. Choutov, and K.P. Martin, August 1996, pp. 50-55.

"The Effect of Radiation on Nuclear Waste Forms" (Overview), W.J. Weber, July 1991, pp. 35-39.

"The Effects of Hydrogen on Titanium Aluminides" (Research Summary), D. Eliezer, F.H. Froes, and C. Suryanarayana, March 1991, pp. 59-62.

"The Effects of Ion Implantation on the Structure of Ceramics" (Overview), C.J. McHargue, July 1991, pp. 40-44.

"Effects of Oxygen on the Solidification Microstructure of LaNi₅" (Research Summary), T.W. Ellis, L.L. Jones, and T.E. Bloomer, February 1995, pp. 47-49.

"Effects of Sodium and Bismuth in Aluminum-Magnesium Alloys" (Research Summary), D.E.J. Talbot and D.A. Granger, February 1995, pp. 44-46.

"Electrical Measurement of a Lead-Free Solder Assembly after Environmental Tests by SEM Internal Probing" (Research Summary), T.I. Shih, Y.C. Lin, J.G. Duh, T. Hsu, and W.S. Wu, July 2007, pp. 32-34.

"Electrochemical Machining: The Role of Steel Microstructure in High-Rate Anodic Dissolution" Research Summary), T. Haisch and E.J. Mittemeijer, July 2002, pp. 38-41.

"Electromigration Effects upon Interfacial Reactions" (Overview), S.-W. Chen and C.-M. Chen, February 2003, pp. 62-67.

"Elevated Temperature Mg-Al-Sr: Creep Resistance, Mechanical Properties, and Microstructure" (Research Summary), E. Baril, P. Labelle, and M.O. Pekguleryuz, November 2003, pp. 34-39.

"Embedded NDE with Piezoelectric Wafer-Active Sensors in Aerospace Applications" (JOM-e: Overview), V. Giurgiutiu, January 2003.

"Evaluating a New Material for Hall-Héroult Cell Cathodes" (Innovations in Aluminum, Part II), T. Mroz, August 1997, pp. 24-25, 71.

"Evaluating the Performance of Can-Body Stock Using the Drawbead Simulator" (Research Summary), J.V. Reid and R.G. Kamat, June 1996, pp. 26-28.

"The Evolution of Diffusion Barriers in Copper Metallization" (Research Summary), C. Lee and Y.-L. Kuo, January 2007, pp. 44-49.

"Faceted Solidification Morphologies in Low-Growth-Rate Al-Si Eutectics" (Research Summary), R.E. Napolitano, H. Meco, and C. Jung, April 2004, pp. 16-21.

"Far from Barbaric: Re-assessing the Sophistication of Merovingian Metalworking" (Archaeotechnology), R.M. Ehrenreich, E. Hamilton, and S.K. Nash, August 2005, pp. 51-55.

"Fine-Particle Characterization by Rietveld QXRD, CLM, and SEM-EDS Phase Mapping" (Overview), A.M. Hagni, December 2002, pp. 24-26.

"Flaky Gold: Problems with Recovery and Mineralogical Quantification" (Overview), S.W. Knipe, S.L. Chryssoulis, and B. Clements, July 2004, pp. 58-62.

"The Basics of Modern Semi-Solid Metal Processing" (Overview), F. Czerwinski, June 2006, pp. 17-20.

"The Focused-Ion-Beam Microscope—More than a Precision Ion Millng Machine" (Overview), J. Li, March 2006, pp. 27-31.

"A Freckle Criterion for the Solidification of Superalloys with a Tilted Solidification Front" (Research Summary), W.-H. Yang, J.J. deBarbadillo, K. Morita, T. Suzuki, W. Chen, and K.-M. Chen, September 2004, pp. 56-61.

"The Fundamentals of Nanostructured Materials Processed by Severe Plastic Deformation" (Overview), Y.T. Zhu and T. G. Langdon, October 2004, pp. 58-63.

"Gas Reactivity Testing of Raw Materials and Anodes" (Overview), S.M. Hume, R.C. Perruchoud, and W.K. Fischer, February 1994, pp. 27-31.

"Gold Process Mineralogy: Objectives, Techniques, and Applications" (Overview), J.Y. Zhou and L.J. Cabri, July 2004, pp. 49-52.

"Grain Boundary Misorientation Effects on Creep and Cracking in Ni-Based Alloys" (Research Summary), G.S. Was, V. Thaveeprungsriporn, and D.C. Crawford, February 1998, pp. 44-49.

"H- and Tritium-Assisted Fracture in N-Strengthened, Austenitic Stainless Steel" (Research Summary), B.P. Somerday and S.L. Robinson, February 2003, pp. 51-55.

"The High-Speed Identification and Sorting of Nonferrous Scrap" (Industrial Insight), D.B. Spencer, April 2005, pp. 46-51.

"Hydrogen and Deformation: Nano- and Microindentation Studies" (Research Summary), D.F. Bahr, K.A. Nibur, K.R. Morasch, and D.P. Field, February 2003, pp. 47-50.

"The Industrial Application of Advanced Electron Microscopy" (Commentary), J. Li, March 2006, p. 19.

"The Influence of Grain Bondaries and Texture on Ferroelectric Domain Hysteresis" (Overview), R. Nath, R.E. Garcia, J.E. Blendell, and B.D. Huey, January 2007, pp. 17-21.

"The Influence of Hydrogen on the Stress-Corrosion Cracking of Low-Strength Al-Mg Alloys" (Research Summary), R.H. Jones, February 2003, pp. 42-46.

"Infrared Analysis of Thin-Film Materials" (Overview), P.A. Rosenthal, J. Xu, S. Charpenay, J.E. Cosgrove, and N.M. Ravindra, October 2000.

"In-situ Neutron Diffraction during Shape-Memory Behavior in Fe-Mn-Si-Cr" (Research Summary), Y. Tomota, S. Harjo, P. Lukás, D. Neov, and P. Sittner, October 2000, pp. 32-34.

"The In-Situ Sensor-Guided Process Characterization of Advanced Composite Materials" (Testing & Analysis), R.M. Kent and M.J. Ruddell, September 1996, pp. 32-34.

"ITO Thin-Film Transparent Conductors: Microstructure and Processing" (Testing & Analysis), Y. Shigesato, I. Yasui, and D.C. Paine, March 1995, pp. 47-50.

"The Laser-Induced Combustion Synthesis of Iron-Oxide Nanocomposite Coatings on Aluminum" Research Summary S. Nayak and N.B. Dahotre, September 2002, pp. 39-41.

"Key Methods for Developing Single-Wall Nanotube Composites" (Overview), E.V. Barrera, November 2000, p. 38-42.

"The Low-Temperature Mechanical Behavior of Molybdenum-Rhenium" (Research Summary), S.R. Agnew and T. Leonhardt, October 2003, pp. 25-29.

"The Luminescence Characteristics of GaN Heteroepitaxial Films" (Research Summary), P.A. Grudowski, A.L. Holmes, C.J. Eiting, and R.D. Dupuis, August 1996, pp. 46-49.

"The Magnetic Detection of Material Properties" (Overview), M.K. Devine, October 1992, pp. 24-30.

"The Magnetic Properties of Beryllium-Copper Alloys" (Forum Feature), J.O. Ratka, February 1991, p. 61.

"Mapping Mechanical Properties on the Nanoscale Using Atomic Force Acoustic Microscopy" (Overview), D.C. Hurley, M. Kopycinska-Muller, and A.B. Kos, January 2007, pp. 23-29.

"The Material Optimization and Reliability Characterization of an Indium-Solder Thermal Interface Material for CPU Packaging" (Research Summary), C. Deppisch, T. Fitzgerald, A. Raman, F. Hua, C. Zhang, P. Liu, and M, Miller, June 2006, pp. 67-74.

"Materials Analysis: A Key to Unlocking the Mystery of the Columbia Tragedy" (Overview), B.M. Mayeaux, T.E. Collins, G.A. Jerman, S.J. McDanels, R.S. Piascik, R.W. Russell, and S.R. Shah, February 2004, pp. 20-30.

"Materials Characterization and Flaw Detection by Acoustic NDE" (Overview), O. Buck, October 1992, pp. 17-23.

"Materials Characterization Using High-Resolution Scanning-Electron Microscopy and X-Ray Microanalysis" (Overview), R. Gauvin, K. Robertson, P. Horny, A.M. Elwazri, and S. Yue, March 2006, pp. 20-26.

"Materials Library: Exploring the Tactile Pleasures of Materials" (End Notes), M. Byko, June 2005, pp. 64.

"Materials Performance in Advanced Fossil Technologies" (Overview), K. Natesan, November 1991, pp. 61-67.

"Materials and Processing Issues in Nanostructured Semiconductor Gas Sensors" (Overview), F. Cosandey, October 2000.

"Materials Science Applications of Inelastic Neutron Scattering"(Overview), B. Fultz, March 2006, pp. 58-63.

"Measurements of Experimentally Grown 3-D Xenon Multiplets and Comparative Phase-Field Simulations" (Research Summary), H.M. Singer, I. Singer, and J.H. Bilgram, July 2007, pp. 77-80, 82.

"Mechanical Property Optimization via Microstructural Control of New Metastable Beta Titanium Alloys" (Overview), N. Clément, A. Lenain, and P.J. Jacques, January 2007, pp. 50-53.

"Microalloyed Aluminum for Cryogenic Conductors" (Research Summary), L.C. McDonald, K.T. Hartwig, and A. Takahashi, February 1995, pp. 41-43.

"Microscopic Studies on Hydrogen Effects on Mechanical Properties" (Overview), I.M. Robertson and D. Teter, November 1996, pp. 55-60.

"The Microstructural Characterization and Simulation of Titanium Alloys Modified with Boron" (Research Summary), S.I. Lieberman, H. Singh, Y. Mayo, A. Sreeranganathan, A.M. Gokhale, S. Tamirisakandala, and D.B. Miracle, January 2007, pp. 59-63.

"The Microstructural Characterization of Semi-Solid Slurries" (Overview), S. Nafisi and R. Ghomashchi, June 2006, pp. 24-30.

"The Microstructural Characterization of Sensors Based on Electronic Ceramic Materials." (JOM-e: Overview), P.I. Gouma, S.A. Akbar, and M.J. Mills, November 1998.

"A Microstructural Study of Gold Treasure from Monte Alban's Tomb 7" (Archaeotechnology), G.A. Camacho-Bragado, M. Ortega-Aviles, M.A. Velasco, and M. José-Yacaman, July 2005, pp. 19-24.

"Microstructure Formation in Ti Alloys: In-Situ Characterization of Phase Transformation Kinetics" (Overview), E. Aeby-Gautier, F. Bruneseaux, J. Da Costa Teixeira, B. Appolaire, G. Geandier, and S. Denis, January 2007, pp. 54-58.

"The Microstructure and Properties of Rapidly Solidified, Dispersion-Strengthened NiAl" (Forum Feature), S.C. Jha and R. Ray, October 1990, pp. 58-61.

"Microstructure-Property Relationships in Pearlitic Eutectoid and Hypereutectoid Carbon Steels" (Overview), E.M. Taleff, J.J. Lewandowski, and B. Pourladian, July 2002, pp. 25-30.

"Microstructure-Property Relationships in Steels: Improving Performance" (Commentary), E.M. Taleff, July 2002, p. 18.

"Mineralogical Characteristics of Electric Arc Furnace Dusts" (1991 Review of Extractive Metallurgy), A.M. Hagni, R.D. Hagni, and C. Demars, April 1991, pp. 28-30.

"Mineralogical Characterization of Metallurgical Products" (Conference Review), R.D. Hagni, April 1991, p. 27.

"Modeling Composition/Processing/Property Relationships in a Cold-Rolled Aluminum Alloy" (Research Summary), I.J. Polmear, J.E. Tibballs, and B. Rinderer, November 1999, pp. 51-53.

"Modification of Al-Si Alloys: Microstructure, Thermal Analysis, and Mechanisms" (Overview), S.-Z. Lu and A. Hellawell, February 1995, pp. 38-40.

"Monitoring and Detecting Environmentally Induced Cracking" (Overview), S.M. Bruemmer, December 1990, 16-17.

"Monitoring and Modeling Stress Corrosion and Corrosion Fatigue Damage" (Featured Overview), P.L. Andresen, F.P. Ford, H.D. Solomon and D.F. Taylor, December 1990, pp. 7-11.

"Nanocrystalline SnO Gas Sensors in View of Surface Reactions and Modifications" Research Summary, S. Seal and S. Shukla, September 2002, pp. 35-38, 60.

"Nanofeatures in Irradiated Materials" (Research Summary), E.P. Simonen, December 1993, pp. 45-49.

"Nanolayer Coatings for Hard Disk and Demanding Tribological Applications" Research Summary, K.W. Lee, D.-J. Li, and Y.-W. Chung, September 2002, pp. 49-52.

"Nanometer-Scale Materials and Technology" (Conference Review), R.D. Shull, November 1993, pp. 60-61.

"Nano- and Microscale Mechanical Characterization Using Instrumented Indentation" Overview, S. Rajagopalan and R. Vaidyanathan, September 2002, pp. 45-48, 60.

"Nanophase Materials in Solid Freeform Fabrication" (Overview), A. Manthiram, D.L. Bourell, and H.L. Marcus, November 1993, pp. 66-70.

"Nanostructured Ceramic and Hybrid Materials via Electrodeposition" Overview, I. Zhitomirsky, A. Petric, and M. Niewczas, September 2002, pp. 31-34.

"Nanostructured Coatings for Machining and Wear-Resistant Applications" Overview, A.P. Malshe, W. Jiang, and A.R. Dhamdhere, September 2002, pp. 28-30.

"Nanostructured Materials: An Overview and Commercial Analysis" (Economics), M.N. Rittner and T. Abraham, January 1998, pp. 36-37.

"Nanostructured Materials and the Role of Surface Engineering" Commentary, S. Seal and N.B. Dahotre, September 2002, pp. 20-21.

"The NDE Analysis of Tension Behavior in Nicalon/SiC Ceramic-Matrix Composites" (JOM-e: Overview), J. Kim, P.K. Liaw, and H. Wang, January 2003.

"An NDE Formability Test for Sheet Metal" (Forum Feature), A.V. Clark, July 1990, p. 48.

"Neutron Scattering Applied to Materials Problems" (Commentary), J.R. Morris, X.-L. Wang, and B.T. Fultz,March 2006, p. 46.

"Neutron Sources in North America: Present and Future" (Overview), T.Holden, A.D.Krawitz, and I. Anderson, March 2006, pp. 64-67.

"New Insights into the Morphological Stability of Eutectic and Peritectic Coupled Growth" (Research Summary), A. Karma and M. Plapp, April 2004, pp. 28-32.

"A New Paradigm--Multi-User Scanning Electron Microscopy" (Featured Overview), L.S. Chumbley, M. Meyer, K. Fredrickson, and F.C. Laabs, September 1995, pp. 13-17.

"The New Quantitative Fractography for Analyzing Metallic Surfaces" (Featured Overview), E.E. Underwood, October 1990, pp. 10-15.

"New Trends in Characterizing Industrial Bayer Aluminas" (Research Summary), M.P. Garcia Coque, M.A. Llavona, J.M. Ayala, L.F. Verdeja and J.P. Sancho, November 1990, pp. 20-21.

"Nondestructive Characterization of Semiconductor Multilayers" (Overview), C. Pickering, September 1994, pp. 60-64.

"The Nondestructive Evaluation of Advanced Ceramics and Ceramic-Matrix Composites" (JOM-e: Overview), J. Kim and P.K. Liaw, November 1998.

"The Nondestructive Evaluation of Materials Properties" (Commentary), P.K. Liaw, October 1992, pp. 10-11.

"An Optical Roughness Sensor for Real-Time Quality Measurement" (Research Summary), R.D. Payne, A.L. Moran, C.J. Madden, and P. Kelley, October 1991, pp. 18-21.

"An Optical Technique to Measure Distortion in Heat-Treated Parts In-Situ" (Research Summary), F. Sciammarella and P. Nash, May 2005, pp. 67-70.

"The Orientation Imaging Microscopy of Lead-Free Sn-Ag Solder Joints" (Research Summary), A.U. Telang and T.R. Bieler, June 2005, pp. 44-49.

"The Oxidation Resistance of MoSi2 Composites" (Research Summary), E.W. Lee, J. Cook, A. Khan, R. Mahapatra, and J. Waldman, March 1991, pp. 54-57.

"Percolative Current Flow in High-J_c, Polycrystalline High-T_c Superconductors" (Overview), A. Goyal, E.D. Specht, D.K. Christen, D.M. Kroeger, A. Pashitski, A. Polyanskii, and D.C. Larbalestier, October 1996, pp. 24-29.

"The Physical Properties of Electronic Materials as Determined by EMF Measurements" (Overview), A. Mikula, January 2007, pp. 35-37.

"Pt-Al-Cr-Ni Superalloys: Heat Treatment and Microstructure" (Research Summary), S. Vorberg, M. Wenderoth, B. Fischer, U. Glatzel, and R. Völkl, September 2004, pp. 40-43.

"The Potential Engineering of Grain Boundaries through Thermomechanical Processing" (Research Summary), A.J. Schwartz and W.E. King, February 1998, pp. 50-55.

"Practical Applications of Nondestructive Materials Characterization" (Featured Overview), R.E. Green, Jr., October 1992, pp. 12-16.

"Preserving the USS Arizona: Retired Engineer Applies Skills to Public Service" (End Notes), K. Roncone, September 2006, p. 80.

"The Process Mineralogy of Gold: The Classification of Ore Types" (Overview), J.P. Vaughan, July 2004, pp. 46-48.

"Processing Nanostructured Materials: An Overview" (Overview), L.L. Shaw, December 2000, pp. 41-45.

"The Processing and Properties of Discontinuously Reinforced Aluminum Composites" (Featured Overview), A.L. Geiger and J.A. Walker, August 1991, pp. 8-15.

"Producing Nanoscale Microstructures through Severe Plastic Deformation" (Commentary), T.C. Lowe and R.Z. Valiev, April 2000, pp. 27-28.

"The Properties and Applications of Rhenium Produced by CVD" (Overview), A.J. Sherman, R.H. Tuffias, and R.B. Kaplan, July 1991, pp. 20-23.

"The Properties and Processing of Microalloyed HSLA Steels" (Overview), H. Stuart, January 1991, pp. 35-40.

"The Qualification of Metallic Materials" (Commentary), William E. Frazier, March 2001, p. 15.

"Quantitative Fractography and Fracture Mechanics Characterization" (Overview), S.M. El-Soudani, October 1990, pp. 20-27.

"Recent Developments in the Application of Process Mineralogy" (1995 Review of Extraction & Processing), R.D. Hagni, April 1995, p. 46.

"Recent Developments in Ceramic Nanocomposites" (Overview), S. Bhaduri and S.B. Bhaduri, January 1998, pp. 44-51.

"Recent Developments in Quantitative Fractography" (Commentary), B.L. Averbach, October 1990, p. 9.

"Rechargeable Lithium-Ion Battery Cathodes: In-Situ XAS" Research Summary), J. McBreen and M. Balasubramanian, March 2002, pp. 25-28.

"Recovering Copper Using a Combination of Electrolytic Cells" Research Summary), Shijie Wang, June 2002, pp. 51-54.

"Reexamining the Pitch/Coke Wetting and Penetration Test" (Overview), Jinan Cao, Alan N. Buckley, and Alan Tomsett, February 2002, pp. 30-33.

"Refined Approaches to the Use of the Coincidence Site Lattice" (Research Summary), V. Randle, February 1998, pp. 56-59.

"Relating the Debye Temperature and Structural Stability of Rapidly Solidified Al Alloys" (Research Summary), R. Dasgupta and S.K. Bose, March 1995, pp. 20-22.

"Room-Temperature Optical Inspection Reliability Indicates Superconductivity" (Featured Overview), H.A. Hoff and C.S. Pande, June 1990, pp. 10-15.

"Scanning Probe Microscopy: Materials Analysis with an Added Dimension" (Featured Overview), P.G. Gise, December 1992, pp. 8-10.

"Science and Art Converge at the National Gallery of Art" (Featured Overview), L. Glinsman and D. Barbour, January 1997, pp. 14-17.

"The Segregation of Elements in High-Refractory-Content Single-Crystal Nickel-Based Superalloys" (Research Summary), E.C. Caldwell. F.J. Fela, and G.E. Fuchs, September 2004, pp. 44-48.

"Serpentine Ore Microtextures Occurring in the Magnola Magnesium Process" (Testing & Analysis), T.T. Chen, J.E. Dutrizac, and C.W. White, April 2000, pp. 20-22.

"Size Distribution Analysis for Copper Matte Particles Oxidized Under Flash- Converting Conditions" Research Summary, Manuel Pérez-Tello, José A. Tirado-Ochoa, Hong Yong Sohn, and Víctor M. Sánchez-Corrales, October 2002, pp. 27-30.

"Sn-Ag-Du Solders and Solder Joints: Alloy Development, Microstructure, and Properties" Research Summary), I.E. Anderson, B.A. Cook, J.L. Harringa, and R.L. Terpstra, June 2002, pp. 26-29.

"The Spray Forming of Nanostructured Aluminum Oxide" Research Summary, A. Agarwal, T. McKechnie, and S. Seal, September 2002, pp. 42-44.

"Sputter Deposited Zirconia-Alumina Nanolaminate Coatings" (Research Summary), C.R. Aita, C.M. Scanlan, and M. Gajdardziska-Josifovska, October 1994, pp. 40-42.

""Structure Determination and Phase Analysis by the Use of a Neutron Diffraction" S.J.L. Billinge, March 2006, pp. 47-51.

"Structure and Mechanical Properties of Nanolaminated Ti-Al Thin Films" (Research Summary), R. Ahuja and H.L. Fraser, October 1994, pp. 35-39.

"The Structure and Properties of Nanocrystalline Materials: Issues and Concerns" Overview, C. Suryanarayana, September 2002, pp. 24-27.

"Studying Fatigue Deformation Using Scanning Probe Microscopy" (Overview), B. Zhou and Y.W. Chung, July 1997, pp. 43-45.

"A Synchrotron Radiation X-Ray Microdiffraction Study on Orientation Relationships between a Cu₆Sn₅ and Cu Substrate in Solder Joints" (Research Summary), J.L. Suh, K.N. Tu, and N. Tamura, June 2006, pp. 63-66.

"Synthesizing Submicrometer and Nanoscale Particles via Self-Assembled Molecular Membranes" (Overview), G.-M. Chow, M.A. Markowitz, and A. Singh, November 1993, pp. 62-65.

"The TEM Characterization of Monodispersed Particles" (Overview), D. Shindo, December 2002, pp. 31-34.

"Theory and Application of Ultrasonic Microstructural Characterization" (Overview), R.B. Thompson, October 1992, pp. 31-35.

"Thermography: A New Nondestructive Evaluation Method in Fatigue Damage" (JOM-e: Overview), B. Yang, P.K. Liaw, H. Wang, J.Y. Huang, R.C. Kuo, and J.G. Huang, January 2003.

"Third Foresight Conference on Molecular Nanotechnology" (Conference Review), D.R. Forrest, October 1994, pp. 28-29.

"Tip Dilation and AFM Capabilities in the Characterization of Nanoparticles" (Overview), Ch. Wong, P.E. West, K.S. Olson, M.L.Mecartney, and N. Starostina, January 2007, pp. 12-16.

"Titanium Investment Casting Defects: A Metallographic Overview" (Overview), J.D. Cotton, L.P. Clark, and H.R. Phelps, June 2006, pp. 13-16.

"Toward a Better Understanding of Ruthenium Aluminide" (Overview), I.M. Wolff, January 1997, pp. 34-39.

"Ultrafine-Grained Microstructures Evolving During Severe Plastic Deformation" (Overview), T. Ungár, I. Alexandrov, and M. Zehetbauer, April 2000, pp. 34-36.

"Understanding the Copper of the Statue of Liberty" (Overview), J.-M. Welter, May 2006, pp. 30-33.

"Understanding Process-Induced Microstructures in RBa2Cu3O7" (Overview), R.W. McCallum and M.J. Kramer, June 1990, pp. 26-28.

"Understanding the Unique Properties of SPD-Induced Microstructures" (Overview), R.Z. Valiev, T.C. Lowe, and A.K. Mukherjee, April 2000, pp. 37-40.

"The Use of Metal Threads and Decorations in Byzantine–Greek Orthodox Ecclesiastical Textiles" (Research Summary), A. Karatzani and Th. Rehren, May 2006, pp. 34-37.

"The Use of Severe Plastic Deformation Techniques in Grain Refinement" (Overview), T. C. Lowe and R.Z. Valiev, October 2004, pp. 64-69.

"Using Acoustic Emission in Fatigue and Fracture Materials Research" (JOM-e: Research Summary), M. Huang, L. Jiang, P.K. Liaw, C.R. Brooks, R. Seeley, and D.L. Klarstrom, November 1998.

"Using Acoustic Emission to Monitor Stress-Corrosion Cracking" (Research Summary), R.H. Jones and M.A. Friesel, December 1990, pp. 12-15.

"Using Artificial Intelligence to Model Heavy Plate Mill Rolling" Research Summary), Vicente Rodríguez Montequín, Francisco Ortega Fernández, Nicoláa de Abajo Martíz, and Juan Antonio González Rodríguez, July 2002, pp. 46-50.

"Using Chemical Sensors to Control Molten Metal Processing" (Overview), J.W. Fergus, October 2000.

"Using Equal-Channel Angular Pressing for Refining Grain Size" (Overview), T.G. Langdon, M. Furukawa, M. Nemoto, and Z. Horita, April 2000, pp. 30-33.

"Using Federal X-Ray, Electron, and Neutron Facilities" (Forum Lab Report), S. Spooner, October 1992, pp. 72-76. (Correction printed in November 1992, p. 67.)

"Using Fractal Analysis to Describe Irregular Microstructures" (Overview), S.-Z. Lu and A. Hellawell, December 1995, pp. 14-17.

"Using Fractal Structure to Describe Nickel Crystal Morphology" (Research Summary), A.E. Lewis and M. Roberts, February 2003, pp. 59-61.

"Using Grain Boundary Mobility to Characterize Aluminum Purity" (Testing & Analysis), D.A. Molodov, U. Czubayko, G. Gottstein, and L.S. Shvindlerman, February 1996, pp. 30-31.

"Using Melt-Textured YBCO for Superconducting Electromotors" (Overview), T. Habisreuther, D. Litzkendorf, T. Strasser, M. Wu, M. Zeisberger, and W. Gawalek, October 1998, pp. 31-36.

"Using OIM to Investigate the Microstructural Evolution of Ti-6Al-4V" (Applied Technology), T.R. Bieler, M.G. Glavicic, and S.L. Semiatin, January 2002, pp. 31-36.

"Using Quantitative Electron Microscopy for Process Mineralogy Applications" (Testing & Analysis), P. Gottlieb, G. Wilkie, D. Sutherland, E. Ho-Tun, S. Suthers, K. Perera, B. Jenkins, S. Spencer, A. Butcher, and J. Rayner, April 2000, pp. 24-25.

"Using Radiocarbon Dating to Establish the Age of Iron-Based Artifacts" (Feature), Andrea C. Cook, John R. Southon, and Jeffrey Wadsworth, May 2003, pp. 15-22.

"Using Scanning Acoustic Microscopy to Study Subsurface Defects and Crack Propagation in Materials" (JOM-e: Research Summary), Z.M. Connor, M.E. Fine, J.D. Achenbach, and M.E. Seniw, November 1998.

"Welding: Solidification and Microstructure" (Overview), S.A. David, S.S. Babu, and J.M. Vitek, June 2003, pp. 13-20.

"The X-Ray Characterization of InGaN and AlGaN Heterostructures for Blue-Light Emitters" (Research Summary), C.J. Eiting, P.A. Grudowski, and R.D. Dupuis, September 1997, pp. 27-30.

"The X-Ray Tomography of a Siliceous Silver Ore"(Research Summary), T.T. Chen, A. Sasov, J.E. Dutrizac, P. Kondos,and G. Poirier, March 2006, pp. 41-44.

"Young's Modulus of TiO₂-Carbon Nanotube Electrospun Fibers" (Research Summary), S.-H. Lee and W.M. Signumd, January 2007, pp. 30-33.