METALLURGICAL AND MATERIALS TRANSACTIONS A | |
---|---|
Volume 28A, No. 10, October 1997 This Month Featuring: The 1996 Howe Memorial Lecture; 1996 Distinguished Lecture in Materials & Society; Alloy Phases; Transformations; Mechanical Behavior; Physical Chemistry; Solidification; Materials Processing; Composite Materials. View October 1997 Abstracts.
|
Competitive Formation of Inter- and Intragranularly Nucleated Ferrite [pp. 2005-2013]
S.J. Jones and H.K.D.H. Bhadeshia
The Role of Manganese and Copper in the Eutectoid Transformation of Spheroidal Graphite Cast Iron [pp. 2015-2025]
Jacques Lacaze, Aline Boudot, Valérie Gerval, Djar Oquab, and Henrique Santos
Effect of the Ti/N Ratio on the Hardenability and Mechanical Properties of a Quenched-and-Tempered C-Mn-B Steel [pp. 2027-2035]
Yulin Shen and Steven S. Hansen
Communication: Bainitic Transformation in Austempered Ductile Iron with Reference to Untransformed Austenite Volume Phenomenon [pp. 2159-2162]
M. Nili Ahmadabadi
Influence of Cerium Additions on High-Temperature-Impact Ductility and Fracture Behavior of Iridium Alloys [pp. 2049-2057]
A.N. Gubbi, E.P. George, E.K. Ohriner, and R.H. Zee
Fatigue Crack Growth Behavior in Niobium-Hydrogen Alloys [pp. 2059-2065]
Mark Ching-Cheng Lin and K. Salama
A Study of the Mechanism of Hardness Change of Al-Zn-Mg Alloy during Retrogression Reaging Treatments by Small Angle X-ray Scattering (SAXS) [pp. 2067-2071]
Chaofu Meng, Houwen Long, and Yong Zheng
The Influence of Martensite on the Strength and Impact Behavior of Steel [pp. 2073-2084]
B. Mintz
R Values of Fiber-Textured Tantalum Plates [pp. 2085-2088]
James O'Brien, Roger Logan, and William Hosford
The Effect of the Austenitizing Heat-Treatment Variables on the Fracture Toughness of High-Speed Steel [pp. 2089-2099]
N. Sarafianos
The Role of Coincidence-Site-Lattice Boundaries in Creep of Ni-16Cr-9Fe at 360°C [pp. 2101-2112]
Visit Thaveeprungsriporn and Gary S.Was
Stress Corrosion Cracking of Superplastically Formed 7475 Aluminum Alloy [pp. 2113-2121]
T.C. Tsai, J.C. Chang, and T.H. Chuang
Communication: Microfracture Behavior of Al-SiC Composites under Dynamic Loading [pp. 2162-2170]
Chang Gil Lee, Dongil Kwon, and Sunghak Lee
Communication: On the Gegel's Stability Criterionin Processing Maps [pp. 2170-2173]
S.V.S. Narayana Murty and B. Nageswara Rao
The Effect of Cooling Rate from the Melt on the Recrystallization Behavior of Aluminum Alloy 6013 [pp. 2137-2142]
Buncha Thanaboonsombut and T.H. Sanders, Jr.
Search | TMS Document Center | Tables of Contents | Subscriptions | Met. and Mat. Trans. | TMS OnLine |
---|