Met and Mat Trans Contents A: October 1996

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS Volume 27A, No. 10, October 1996 This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Environment; Electronic, Magnetic, & Optical Material; Solidification; Materials Processing; Composite Materials. View October 1996 Abstracts.

METALLURGICAL AND MATERIALS TRANSACTIONS A

TABLE OF CONTENTS
Volume 27A, No. 10, October 1996

This Month Featuring: Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Environment; Electronic, Magnetic, & Optical Material; Solidification; Materials Processing; Composite Materials. View October 1996 Abstracts.

Alloy Phases

An Experimental Study and Thermodynamic Calculations of Phase Equilibria in the Fe-Mo-C-N System [pp. 2869-2880]
Karin Frisk and Bjorn Uhrenius

Influence of Thermal Aging on the Intergranular Corrosion Resistance of Types 304LN and 316LN Stainless Steels [pp. 2881-2887]
U. Kamachi Mudali, R.K. Dayal, J.B. Gnanamoorthy, and P. Rodriguez

Lattice Misfits in Four Binary Ni-Base Alloys at Ambient and Elevated Temperatures [pp. 2888-2896]
A.B. Kamara, A.J. Ardell, and C.N.J. Wagner

A Thermodynamic Evaluation of the Nickel-Silicon System [pp. 2897-2903]
Mikael Lindholm and Bo Sundman

Kinetics of Phase Evolution of Zn-Fe Intermetallics [pp. 2904-2910]
Z.T. Liu, M. Boisson, and O.N.C. Uwakweh

High-Resolution Electron Microscopy Analysis of Structural Defects in a (2/1,5/3)-Type Approximant of a Decagonal Quasicrystal of an Al-Pd-Mn Alloy [pp. 2911-2915]
D.P. Yu, G. Ren, and Z. Zhang

Transformations

The Relationship Between Microstructural and Plastic Instability in Al-4.0 Wt Pct Cu Alloy [pp. 2916-2922]
E. Cerri, E. Evangelista, and N. Ryum

Low Quench Sensitivity of Superplastic 8090 Al-Li Thin Sheets [pp. 2923-2933]
Tsung-Rong Chen, Guan-Jye Peng, and J.C. Huang

Incipient Chemical Instabilities of Nanophase Fe-Cu Alloys Prepared by Mechanical Alloying [pp. 2934-2946]
B. Fultz, C.C. Ahn, S. Spooner, L.B. Hong, J. Eckert, and W.L. Johnson

Effects of Alloy Modification and Thermomechanical Processing on Recrystallization of Al-Mg-Mn Alloys [pp. 2947-2957]
K. Kannan, J.S. Vetrano, and C.H. Hamilton

Alloy Phase Analysis from Measurements of Bulk Magnetic Properties [pp. 2958-2965]
K.A. Lindahl, D.L. Olson, and J.U. Trefny

A High-Resolution Transmission Electron Microscopy Study of the Precipitation Process in a Dilute Ti-N Alloy [pp. 2966-2977]
D. Sundararaman, S. Ranganathan, and V.S. Raghunathan

Communication: Discussion of "Effects of Tensile Stress on Microstructural Change of Eutectoid Zn-Al Alloy" [pp. 3330-3332]
Elizabeth Martinez, J. Montemayor-Aldrete, D. Muñoz-Andrade, and G. Torres-Villaseñor

Communication: Author's Reply [pp. 3332-3335]
Y.H. Zhu and E. Orozco

Transport Phenomena

Application of the High-Temperature X-Ray Diffraction Method to the Diffusion Study in the MgO-Al₂O₃ System [pp. 2978-2984]
P. Zhang, J. Karwan-Baczewska, S. Du, and S. Seetharaman

Mechanical Behavior

Effect of Thermomechanical Treatments on the Room-Temperature Mechanical Behavior of Iron Aluminide Fe₃Al [pp. 2985-2993]
Arvind Agarwal, R. Balasubramaniam, and S. Bhargava

Constitutive Behavior of Tantalum and Tantalum-Tungsten Alloys [pp. 2994-3006]
Shuh Rong Chen and George T. Gray, III

The Effects on Fracture Toughness of Ductile-Phase Composition and Morphology in Nb-Cr-Ti and Nb-Si In Situ Composites [pp. 3007-3018]
D.L. Davidson, K.S. Chan, and D.L. Anton

Cleavage Initiation in the Intercritically Reheated Coarse-Grained Heat Affected Zone: Part II. Failure Criteria and Statistical Effects [pp. 3019-3029]
C.L. Davis and J.E. King

Control of Superplastic Deformation Rate During Uniaxial Tensile Tests [pp. 3030-3042]
P.A. Friedman and A.K. Ghosh

The Influence of Stress Triaxiality on the Damage Mechanisms in an Equiaxed / Ti-6Al-4V Alloy [pp. 3043-3058]
A.L. Helbert, X. Feaugas, and M. Clavel

Nonequilibrium Grain-Boundary Segregation and Ductile-Brittle-Ductile Transition in Fe-Mn-Ni-Ti Age-Hardening Alloy [pp. 3059-3065]
N.H. Heo

Effect of Stress State on the Stress-Induced Martensitic Transformation in Polycrystalline Ni-Ti Alloy [pp. 3066-3073]
Kurt Jacobus, Huseyin Sehitoglu, and Mark Balzer

Prediction of Creep-Ruptured Life of Unidirectional Titanium Matrix Composites Subjected to Transverse Loading [pp. 3074-3080]
Reji John, M. Khobaib, and Paul R. Smith

Intergranular Fracture in Some Precipitation-Hardened Aluminum Alloys at Low Temperatures [pp. 3081-3088]
S. Kuramoto, G. Itoh, and M. Kanno

Tension Characteristics of Notched Specimens for Al-Li-Cu-Zr Alloy Sheets with Various Cerium Contents [pp. 3089-3094]
L. Meng and X.L. Zheng

Failure Characteristics of 6061/Al₂O₃/15p and 2014/Al₂O₃/15p Composites as a Function of Loading Rate [pp. 3095-3107]
B.Y. Lou and J.C. Huang

Influence of Training Time and Temperature on Shape Memory Effect in Cu-Zn-Al Alloys [pp. 3108-3111]
Gu Nanju, Peng Huifen, and Wang Ruixiang

Simulation of the Hot-Tension Test Under Cavitating Conditions [pp. 3112-3119]
P.D. Nicolaou, S.L. Semiatin, and C.M. Lombard

The Effect of Mo Addition on the Liquid-Phase Sintering of W Heavy Alloy [pp. 3120-3125]
Hee-Dong Park, Woon-Hyung Baik, Suk-Joong L. Kang, and Duk-Yong Yoon

Microstructure and Tensile Properties of Compacted, Mechanically Alloyed, Nanocrystalline Fe-Al [pp. 3126-3134]
J. Rawers, G. Slavens, D. Govier, C. Do;akgan, and R. Doan

High-Temperature Wear and Deformation Processes in Metal Matrix Composites [pp. 3135-3148]
J. Singh and A.T. Alpas

The Effect of High-Energy Electron-Beam Irradiation on Microstructural Modification of a High-Speed Steel Roll [pp. 3149-3161]
Dongwoo Suh, Sunghak Lee, Yangmo Koo, and Hui Choon Lee

Effect of Postweld Treatment on the Fatigue Crack Growth Rate of Electron-Beam-Welded AISI 4130 Steel [pp. 3162-3169]
Chien-Chun Wang and Yih Chang

Elevated Temperature Compressive Properties of N-Doped NiAl [pp. 3170-3180]
J. Daniel Whittenberger, R.D. Noebe, and A. Garg

Communication: Ballistic Impact Behavior of Multilayered Armor Plates Processed by Hardfacing [pp. 3335-3340]
Seong-Hun Choo, Eung-Ryul Baek, and Sunghak Lee

Communication: Analysis of the Stress-Strain Curves of a Modified 9CR-1MO Steel by the Voce Equation [pp. 3340-3343]
R. Kishore and T.K. Sinha

Communication: Effect of Alloying Additions on Fracture Behavior of Mo-Containing Secondary Hardening Steels [pp. 3343-3346]
H. Kwon, C.M. Kim, K.B. Lee, H.R. Yang, and J.H. Lee

Physical Chemistry

Influence of Interfacial Reaction Rates on the Wetting Driving Force in Metal/Ceramic Systems [pp. 3181-3186]
K. Landry, C. Rado, and N. Eustathopoulos

Influence of Gold Content on Copper Oxidation from Silver-Gold-Copper Alloys [pp. 3187-3191]
D.R. Swinbourne, G.G. Barbante, and A. Strahan

Environment

Internal Sulfide Precipitation in Low Cr-Fe Alloys [pp. 3192-3202]
B.J. Smith, J.I. Goldstein, and A.R. Marder

Electronic, Magnetic, & Optical Material

Development of a Magnetoelastic Resonant Sensor Using Iron-Rich, Nonzero Magnetostrictive Amorphous Alloys [pp. 3203-3213]
C.K. Kim, and R.C. O'Handley

Solidification

Modeling of Ingot Distortions During Direct Chill Casting of Aluminum Alloys [pp. 3214-3225]
J.-M. Drezet and M. Rappaz

Solidification of Undercooled Fe-Cr-Ni Alloys: Part II. Microstructural Evolution [pp. 3226-3240]
T. Koseki and M.C. Flemings

Materials Processing

Thermal Residual Stresses in Functionally Graded and Layered 6061 Al/SiC Materials [pp. 3241-3249]
S. Ho and E.J. Lavernia

The Use of Microstructural Gradients in Hot Gas-Pressure Forming of Zn-Al Sheet [pp. 3250-3258]
J.-Q. Jiang and P.S. Bate

Communication: Temperature Dependence of the Rate Sensitivity and Its Effect on the Activation Energy for High-Temperature Flow [pp. 3346-3348]
F. Montheillet and J.J. Jonas

Composite Materials

Ni₃Al Intermetallic Particles as Wear-Resistant Reinforcement for Al-Base Composites Processed by Powder Metallurgy [pp. 3259-3266]
C. Diaz, J.L. Gonzalez-Carrasco, G. Caruana, and M. Lieblich

Thermally Assisted and Mechanically Driven Solid-State Reactions for Formation of Amorphous Al₃₃Ta₆₇ Alloy Powders [pp. 3267-3278]
M. Sherif El-Eskandarany

Kinetics of Cyclic Oxidation and Cracking and Finite Element Analysis of MA956 and Sapphire/MA956 Composite System [pp. 3279-3291]
Kang N. Lee, Vinod K. Arya, Gary R. Halford, and Charles A. Barrett

Loading Rate and Test Temperature Effects on Fracture of In Situ Niobium Silicide-Niobium Composites [pp. 3292-3306]
Joseph D. Rigney and John J. Lewandowski

Influence of Particle Size and Volume Percent of Flaky Mo Particles on the Mechanical Properties of Al₂O₃/Mo Composites [pp. 3307-3317]
Y. Waku, M. Suzuki, Y. Oda, and Y. Kohtoku

Structure of Phases in the Al₂O₃ Fiber Studied by Convergent Beam Electron Diffraction [pp. 3318-3329]
Shuncai Wang and H.J. Dudek

Direct questions about this or any other Metallurgical and Materials Transactions page to mettrans@andrew.cmu.edu.

Search TMS Document Center Tables of Contents Subscriptions Met. and Mat. Trans. TMS OnLine