METALLURGICAL AND MATERIALS TRANSACTIONS A
	TABLE OF CONTENTS Volume 27A, No. 7, July 1996 This Month Featuring: Symposium on Dynamic Behavior of Materials Part II; Alloy Phases; Transformations; Transport Phenomena; Mechanical Behavior; Physical Chemistry; Welding & Joining; Solidification; Materials Processing; and Composite Materials. View July 1996 Abstracts.

Symposium on Dynamic Behavior of Materials Part II

Reaction Sintering of Shock-Compressed Ti + C Powder Mixtures [pp. 1749-1760]
Jong-Heon Lee, Naresh N. Thadhani, and Henry A. Grebe

Mechanistic Processes Influencing Shock Chemistry in Powder Mixtures of the Ti-Si, Ti-Al, and Ti-B Systems [pp. 1761-1771]
T.E. Royal, S. Namjoshi, and N.N. Thadhani

Aspects of Dynamic Recrystallization in Shaped Charge and Explosively Formed Projectile Devices [pp. 1773-1778]
C. Feng, L.E. Murr, and C.-S. Niou

Alloy Phases

Microstructural Aspects of the Dissolution and Melting of Al₂Cu Phase in Al-Si Alloys During Solution Heat Treatment [pp. 1785-1798]
A.M. Samuel, J. Gauthier, and F.H. Samuel

Communication: Stable and Metastable Ordered Phases in Microcrystalline Alloys Ni (Fe, Mn, Ti) [pp. 2045-2046]
V.I. Gomankov, V.G. Fedotov, V.V. Sosnin, O.M. Zhigalina, and V.V. Sumin

Transformations

Communication: Crystallization of Amorphous Phase in Sputter-Deposited Ti-Al Alloy Thin Films [pp. 2047-2050]
R. Banerjee, S. Swaminathan, J.M.K. Wiezorek, R. Wheeler, and H.L. Fraser

Communication: An Analysis of Static Recrystallization During Continuous, Rapid Heat Treatment [pp. 2051-2053]
S.L. Semiatin, I.M. Sukonnik, and V. Seetharaman

Transport Phenomena

Pressure Dependence of Anomalous Diffusion of Zirconium in -Titanium

Internal Friction in Hydrogen-Charged CrNi and CrNiMn Austenitic Stainless Steels [pp. 1815-1821]
V.G. Gavriljuk, H. Hänninen, S.Yu. Smouk, A.V. Tarasenko, and K. Ullakko

Control of Iron Nitride Layers Growth Kinetics in the Binary Fe-N System [pp. 1823-1835]
L. Torchane, P. Bilger, J. Dulcy, and M. Gantois

Mechanical Behavior

Microstructure and Tensile Behavior of Nitrogen-Alloyed, Dual-Phase Stainless Steels [pp. 1845-1859]
H. Berns, J. Kleff, G. Krauss, and R.P. Foley

Characterization and Mechanical Properties of Ultrahigh Boron Steels Produced by Powder Metallurgy [pp. 1861-1867]
J.A. Jiménez, G. González-Doncel, and O.A. Ruano

Effect of Phase Composition and Hydrogen Level on the Deformation Behavior of Titanium-Hydrogen Alloys [pp. 1869-1876]
O.N. Senkov and J.J. Jonas

Dynamic Strain Aging and Hydrogen-Induced Softening in Alpha Titanium [pp. 1877-1887]
O.N. Senkov and J.J. Jonas

Characterization of Superplastic Deformation Behavior of a Fine Grain 5083 Al Alloy Sheet [pp. 1889-1898]
R. Verma, P.A. Friedman, A.K. Ghosh, S. Kim, and C. Kim

Multiple Matrix Cracking in a Fiber-Reinforced Titanium Matrix Composite Under High-Cycle Fatigue [pp. 1899-1907]
D.P. Walls, J.C. McNulty, and F.W. Zok

A Comparison of Fracture Behavior of Low Alloy Steel with Different Sizes of Carbide Particles [pp. 1909-1917]
G.Z. Wang and J.H. Chen

Physical Chemistry

Welding & Joining

Solidification

Communication: The Rayleigh Instability and the Origin of Rows of Droplets in the Monotectic Microstructure of Zinc-Bismuth Alloys [pp. 2053-2057]
B. Majumdar and K. Chattopadhyay

Materials Processing

Effect of Holding Time in the ( + ) Temperature Range on Toughness of Specially Austempered Ductile Iron [pp. 1961-1971]
Toshiro Kobayashi and Shinya Yamada

Milling Dynamics: Part II. Dynamics of a SPEX Mill and a One-Dimensional Mill [pp. 1973-1979]
D. Maurice and T.H. Courtney

Milling Dynamics: Part III. Integration of Local and Global Modeling of Mechanical Alloying Devices [pp. 1981-1986]
D. Maurice and T.H. Courtney

Influence of Temperature Transients on the Hot Workability of a Two-Phase Gamma Titanium Aluminide Alloy [pp. 1987-2004]
V. Seetharaman and S.L. Semiatin

Communication: An Optical Method for Determining the Surface Orientation of Crystals [pp. 2057-2062]
Lauri Pirttiaho and Jack Blakely

Composite Materials

Growth Behavior of Microstructurally Short Cracks in the 6061 Aluminum Alloy With and Without 22 Vol Pct SiC Whiskers [pp. 2013-2021]
Hiroyuki Toda and Toshiro Kobayashi

The Control of Grain Size and Distribution of Particles in a (6061 Alloy)_m/(Al₂O₃)_p Composite by Solutionizing Treatment [pp. 2023-2034]
S.K. Varma, Javier Ponce, Michael Solis, Shane Andrews, and Daniel Salas

Interface Effects on the Micromechanical Response of a Transversely Loaded Single Fiber SCS-6/Ti-6Al-4V Composite [pp. 2035-2043]
S.G. Warrier, D.B. Gundel, B.S. Majumdar, and D.B. Miracle