"Alkaline Copper-Plating Process Eliminates Cyanide and Improves Product Quality" (Forum Feature), T. Davidson, December 1991, pp. 46, 47.

"Alloys Resist Wear Without Costly Cobalt" (Forum Feature), H. Ocken, July 1991, p. 57.

"The Anti-Microbial Activity of Titania-Nickel Ferrite Composite Nanoparticles" (Research Summary), S. Rana and R.D.K. Misra, December 2005, pp. 65-69.

"The Application of Laser-Induced Multi-Scale Surface Texturing" (Overview), P.G. Engleman, A. Kurella, A. Samant, C.A. Blue, and N.B. Dahotre, December 2005, pp. 46-50.

"Atomic-Scale Friction and Its Connection ot Fracture Mechanics" (Research Summary), R.W. Carpick, E.E. Flater, K. Sridharan, D.F. Ogletree, and M. Salmeron, October 2004, pp. 48-52.

"The Bonding of Nanowire Assemblies Using Adhesive and Solder" (Research Summary), Z. Gu, H. Ye, and D.H. Garcias, December 2005, pp. 60-64.

"The Cathodic Electrodeposition of Manganese Oxide Films for Electrochemical Supercapacitors" (Overview), I. Zhitomirsky, M. Cheong, and J. Wei, July 2007, pp. 66-69.

"Ceramic Films Using Cathodic Electrodeposition" (JOM-e: Overview), I. Zhitomirsky, January 2000.

"Ceramic Thermal Barrier Coatings for Commercial Gas Turbine Engines" (Overview), S.M. Meier, D.K. Gupta, and K.D. Sheffler, March 1991, pp. 50-53.

"Ceria-Based High-Temperature Coatings for Oxidation Prevention" (JOM-e: Research Summary), S. Seal, S.K. Bose, and S.C. Kuiry, January 2000.

"The CFD Modeling of the EB-PVD of SiC/Ti-6Al-4V Coatings" (Research Summary), L. Nastac, W. Hanusiak, H. Dong, and F.R. Dax, March 2004, pp. 49-53.

"The Challenge of Precursor Compounds in the MOCVD of Oxides" (JOM-e: Overview), R. Xu, October 1997.

"Changes in Electrochemical Impedance with Microstructural Development in TBCs"(Research Summary), B.Jayaraj, S. Vishweswariah, V.H. Desai, and Y.H. Sohn, January 2006, pp. 60-63.

"The Characterization of Continuous Hot-Dip Galvanized and Galvannealed Steels" (Overview), S. Dionne, March 2006, pp. 32-40.

"The Characterization and Development of Bioactive Hydroxyapatite Coatings" (Overview), J.L. Ong, M. Appleford, S. Oh, Y. Yang, W.-H. Chen, J.D. Bumgardner, and W.O. Haggard, July 2006, pp. 67-69.

"Chemical Vapor Deposited Diamond for Thermal Management" (Overview), J.E. Graebner and S. Jin, June 1998, pp. 52-55.

"Coating and Fiber Effects on SiC-Reinforced Titanium" (Overview), D. Upadhyaya, M. Wood, C.M. Ward-Close, P. Tsakiropoulos, and F.H. Froes, November 1994, pp. 62-67.

"Coating Ceramic Composites by a Laser In-Situ Reaction Technique" (Research Summary), N.B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay, October 1995, pp. 51-53.

"Coating-Removal Techniques: Advantages and Disadvantages" (Overview), W.E. Reitz, July 1994, pp. 55-59.

"Codepositing Elements by Halide-Activated Pack Cementation" (Overview), R. Bianco, M.A. Harper, and R.A. Rapp, November 1991, pp. 68-73.

"A Cold-Gas Spray Coating Process for Enhancing Titanium" (Overview), A.E. Segall, A.N. Papyrin, J.C. Conway, Jr., and D.l. Shapiro, September 1998, pp. 52-54.

"Colloidal Stability by Surface Modification" (Overview), S.VNT Kuchibhatla, A.S. Karakoti, and S. Seal, December 2005, pp. 52-56.

"The Constitution and Microstructure of Laser Surface-Modified Metals" (Featured Overview), J. Singh, September 1992, pp. 8-14.

"The Correlation between the Electronic Structure and Elastic Properties of Nanolaminates" (Overview), D. Music and J.M. Schneider, July 2007, pp. 60-64.

"Cost-Effective, High-Volume Molecular Beam Epitaxy" (Overview), D. Hartzell, L.K. Leung, and F.J. Towner, August 1998, pp. 37-39.

"The Critical Role of Surface Modification in Biomaterials" (Commentary), W. Reitz, February 1997, p. 44.

"A Crystal Ball View of Direct-Metal Deposition" (Overview), J. Mazumder, December 2000, pp. 28-29.

"The CVD Coating of Fibers for Composite Materials" (Overview), M.K. Alam and S.C. Jain, November 1990, pp. 56-58.

"The Cyclic Oxidation Performance of Aluminide and Pt-Aluminide Coatings on Cast Ni-Based Superalloy CM-247" (JOM-e: Research Summary), D.K. Das, V. Singh, and S.V. Joshi, January 2000.

"Deformation and Phase Transformations during the Cyclic Oxidation of Ni-Al and Ni-Pt-Al"(Research Summary), B.A. Pint, S.A. Speakman, C.J. Rawn, and Y. Zhang, January 2006, pp. 47-52.

"Depositing Copper Patterns on Teflon" (Forum Feature), R.R. Rye, M.J. Hampden-Smith, and T.T. Kodas, July 1992, pp. 56, 57.

"The Deposition of Diamond Films on Steel" (Forum Feature), A.H. Deutchman and R.J. Partyka, March 1990, p. 58.

"Designing Oxidation-Resistant Coatings" (Overview), J.R. Nicholls, January 2000, pp. 28-35.

"The Development and Application of Diamond-Like Carbon Films" (Overview), R. Jethanandani, February 1997, pp. 63-65.

"The Development of Composite Plating for Advanced Materials" (Overview), J.R. Roos, J.P. Celis, J. Fransaer and C. Buelens, November 1990, pp. 60-63.

"The Development of a Fluidized Bed Process for the Heat Treatment of Aluminum Alloys" (Industrial Insight), J. Keist, April 2005, pp. 34-39.

"Diamond Films by the Excimer Laser Photoablation of Polymers" (Research Summary), S. Latsch and H. Hiraoka, July 1994, pp. 64, 65.

"Diamond Synthesis at Low Temperatures" (Research Summary), J.H.D. Rebello and V.V. Subramanian, July 1994, pp. 60-63.

"Discrete Modeling via Function Approximation Methods: Bridging Atomic- and Microscales" (JOM-e: Overview),A.G. Jackson and M.D. Benedict, August 1999.

"The Domain of Functional Coatings and Beyond" (Commentary), Narendra B. Dahotre and Sudipta Seal, September 2001, p. 43.

"EB-PVD Technology in the Gas Turbine Industry: Present and Future" (Overview), B.A. Movchan, November 1996, pp. 40-45.

"The Effect of Micro-Gravity and Bioactive Surfaces on the Mineralization of Bone" (Research Summary), J. Maroothynaden and L.L. Hench, July 2006, pp. 57-63.

"The Effect of Surface Modification on Fretting Fatigue in Ti Alloy Turbine Components" (Research Summary), S. Chakravarty, R.G. Andrews, P.C. Patnaik, and A.K. Koul, April 1995, pp. 31-35.

"The Effects of Ion Implantation on the Structure of Ceramics" (Overview), C.J. McHargue, July 1991, pp. 40-44.

"The Eighth International Conference on Surface Modification Technology" (Conference Review), W.E. Reitz, April 1995, pp. 14, 15.

"The Electrodeposition of Ceramic and Organoceramic Films for Fuel Cells" (Overview), I. Zhitomirsky and A. Petric, September 2001, pp. 48-50.

"Emerging Technologies in the Hot-Dip Coating of Automotive Sheet Steel" (Overview), V. Jagannathan, August 1993, pp. 48-51.

"Engineering Wear-Resistant Surfaces in Automotive Aluminum" (Overview), V. Kevorkijan, February 2003, pp. 32-34.

"Enhancing the Corrosion Resistance of Metals by Laser Processing" (Research Summary), J. Barnikel, T. Seefeld, A. Emmel, E. Schubert, and H.W. Bergmann, May 1996, pp. 29-32.

"Enhancing Osseointegration Using Surface-Modified Titanium Implants" (Overview), Y. Yang, N. Oh, Y. Liu, W. Chen, S. Oh, M. Appleford, S. Kim, K. Kim. S. Park, J. Bumgardner, W. Haggard, and J. Ong, July 2006, pp. 71-76.

"Epitaxy: The Key to High-Performance Semiconductor Devices" (Commentary), J.M. Parsey, Jr., December 1995, p. 24.

"Erosion Studies on Duplex and Graded Ceramic Overlay Coatings" (Research Summary), S. Usmani and S. Sampath, November 1996, pp. 51-54.

"The Fabrication of Bulk Ultrafine-Grained Zirconium by Accumulative Roll Bonding" (Research Summary), L. Jiang, O.A. Ruano, M.E. Kassner, M.T. Perez-Prado, June 2007, pp. 42-45.

"The Feasibility of Forming Superhard Nitrides by Ion Implantation" (Research Summary), B. Park, November 1995, pp. 49-51.

"The Fifth Surface Modification Technologies Conference" (Conference Review), T.A. Place, March 1992, pp. 25, 26.

"The Formation of Protective Nitride Surfaces for PEM Fuel Cell Metallic Bipolar Plates" (Research Summary), M.P. Brady, B. Yang, H. Wang, J.A. Turner, K.L. More, M. Wilson, and F. Garzon, August 2006, pp. 50-57.

"Forming Carbonitride Coatings on Titanium by Thermochemical Treatment with C-N-O-Containing Media" (Research Summary), I.M. Pohrelyuk, O.I. Yaskiv, and V.M. Fedirko, June 2007, pp. 32-37.

"Forming Continuous Alumina Scales to Protect Superalloys" (Overview), N. Birks, G.H. Meier, and F.S. Pettit, December 1994, pp. 42-46.

"Forming Nanostructured Hypereutectic Aluminum via High-Velocity Oxyfuel Spray Deposition" (Research Summary), T. Laha, A. Agarwal, and T. McKechnie, January 2004, pp. 54-56.

"Friction and Wear Reduction via an Ni-B Electroless Bath Coating for Metal Alloys" (Indistrial Insight), Y.W. Riddle and T.O. Bailer, April 2005, pp. 40-45.

"From Research to Manufacture—The Evolution of MOCVD" (Overview), P. Grodzinski, S.P. DenBaars, and H.C. Lee, December 1995, pp,. 25-31.

"The Functionality of Laser-Surface-Engineered Composite Titanium Diboride Coatings" (JOM-e: Research Summary), A. Agarwal and N.B. Dahotre, January 2000.

"Government Nanotechnology Funding: An International Outlook" (Government), M.C. Roco, September 2002, pp. 22-23.

"High-Density-Infrared Transient Liquid Coatings" (JOM-e: Overview), C.A. Blue, V.K. Sikka, E.K. Ohriner, P.G. Engleman, and D.C. Harper, January 2000.

"High-Performance Diamond and Diamond-like Coatings" (Overview), S.J. Bull and P.R. Chalker, April 1995, pp. 16-19.

"The High-Volume Production of Heterojunction Bipolar Transistors" (Research Summary), N. Pan, D. Hill, C. Rose, D. McCullough, P. Rice, D.P. Vu, K. Hong, and C. Farley, August 1998, pp. 45-47.

"HIP-Clad Products for the Plastics Industry" (Overview), M.F. Bishop and C.K. Nickel, July 1999, pp. 32—34.

"Improving the Oxidation Protection of Niobium and Tantalum by the Use of Multilayer Coatings" (Research Summary), Y.V. Dzyadykevich and L.I. Kytskay, January 1997, pp. 30, 31.

"Improving the Properties of Titanium Alloys by Ion Implantation" (Applied Technology), P. Sioshansi, March 1990, pp. 30, 31.

"The In-Service Degradation of Corrosion-Resistant Coatings" (Research Summary), N.S. Cheruvu, T.J. Carr, J. Dworak, and J. Coyle, May 1996, pp. 34-38.

"The Integrated Multiscale Modeling of Diamond Chemical Vapor Deposition" (Overview), D.J. Srolovitz, D.S. Dandy, J.E. Butler, C.C. Battaile, and Paritosh, September 1997, pp. 42-47.

"The Ion-Beam Processing of Powders" (Overview), H.R. Müller and W.J. Ensinger, April 1995, pp. 20-25.

"IPC and Hot-Dip Galvanizing: Enhancing Knowledge Transfer with Visual Modeling" (Overview), D.C. Schmidt, J. Haddock, W.A. Wallace, and R.N. Wright, January 1992, pp. 28-31.

"Issues in High-Volume Compound Semiconductor Epitaxy" (Commentary), J.M. Parsey, Jr., August 1998, pp. 32-33.

"Jerky-Type Phenomena at Nanocomposite Surfaces: The Breakdown of the Coulomb Friction Law" (Overview), J.T.M. De Hosson, Y. Pei, and C. Chen, July 2007, pp. 45-49.

"The Laser-Assisted Iron Oxide Coating of Cast Al Auto Engines" (Overview), N. Dahotre, S. Nayak, and O. Popoola, September 2001, pp. 44-46.

"The Laser-Induced Combustion Synthesis of Iron-Oxide Nanocomposite Coatings on Aluminum" (Research Summary), S. Nayak and N.B. Dahotre, September 2002, pp. 39-41.

"Laser Surface Modification of Zinc-Base Composites" (Applied Technology), N.B. Dahotre, T.D. McCay and M.H. McCay, June 1990, pp. 44-47.

"Maintaining Adhesion of Protective Al₂O₃ Scales" (Overview), J.L. Smialek, January 2000, pp. 22-25.

"Materials for High-Temperature Protection" (Commentary), V. Desai, January 2006, pp. 15-16.

"Modeling the Effects of Impurities on Microstructure Formatin in Nanocrystalline Nickel Thin Films" (Overview), C.C. Battaile and J.J. Hoyt, September 2005, pp. 71-73.

"Modeling the Gas By-products of Metalorganic Chemical Vapor Deposition" (JOM-e: Research Summary), J.G. Jones and P.D. Jero, August 1999.

"Moisture-Induced Delayed Spallation and Interfacial Hydrogen Embrittlement of Alumina Scales" (Research Summary), J.L. Smialek, January 2006, pp. 29-35.

"Molecular-Beam Epitaxy and Related Growth Techniques" (Overview), C.W. Tu, December 1995, pp. 34-37.

"Morphological Response of Diamond Films in Dry Sliding Contact" (Research Summary), M.L. Languell, M.A. George, J.J. Wert, and J.L. Davidson, July 1994, pp. 66-70.

"A Multi-Textured Calcium Phosphate Coating for Hard Tissue via Laser Surface Engineering" (Overview), Anil Kurella and Narendra B. Dahotre, July 2006, pp. 64-66.

"Nano- and Microscale Mechanical Characterization Using Instrumented Indentation" (Overview), S. Rajagopalan and R. Vaidyanathan, September 2002, pp. 45-48, 60.

"The Nanochemical and Nanoscratch Properties of MWNT-Reinforced Ultrahigh-Molecular-Weight Polyethylene Coatings" (Research Summary), S.R. Bakshi, K. Balani, T. Laha, J. Tercero, and A. Agarwal, July 2007, pp. 50-53.

"Nanocrystalline SnO Gas Sensors in View of Surface Reactions and Modifications" (Research Summary), S. Seal and S. Shukla, September 2002, pp. 35-38, 60.

"Nanolayer Coatings for Hard Disk and Demanding Tribological Applications" (Research Summary), K.W. Lee, D.-J. Li, and Y.-W. Chung, September 2002, pp. 49-52.

"Nanomaterials and Surfaces: Processing, Characterization, and Applications" (Commentary), N.B. Dahotre and S. Seal, October 2004, p. 35.

"Nanosized Metal Clusters: Challenges and Opportunities" (Overview), J.Th.M. De Hosson, G. Palasantzas, T. Vystavel, and S. Koch, January 2004, pp. 40-45.

"Nanostructured Ceramic and Hybrid Materials via Electrodeposition" (Overview), I. Zhitomirsky, A. Petric, and M. Niewczas, September 2002, pp. 31-34.

"Nanostructured Ceramics in Medical Devices: Applications and Prospects" (Overview), R.J. Narayan, P.N. Kumta, C. Sfeir, D.-H. Lee, D. Olton, and D. Choi, October 2004, pp. 38-43.

"Nanostructured Coatings for Machining and Wear-Resistant Applications" (Overview), A.P. Malshe, W. Jiang, and A.R. Dhamdhere, September 2002, pp. 28-30.

"Nanostructured Materials and the Role of Surface Engineering" (Commentary), S. Seal and N.B. Dahotre, September 2002, pp. 20-21.

"Nanotribology of Anti-Friction Coatings in MEMS" (Overview), M. Chandross, C.D. Lorenz, G.S. Grest, M.J. Stevens, and E.B. Webb III, September 2005, pp. 55-61.

"New Coatings Combine Durability with Lubricity" (Forum Features), April 1993, p. 70.

"Nitrogen-Atomized, Nickel-Based, Corrosion-Resistant Alloys" (Research Summary), F.J. Rizzo, April 1996, pp. 24-27.

"Nitrogen Ion Implantation of Chromium-Plated Layers" (Forum Feature), A.H. Deutchman and R.J. Partyka, October 1990, pp. 60, 61.

"The Non-Destructive and Nano-Microstructural Characterization of Thermal-Barrier Coatings" (Research Summary), Y.H. Sohn, B. Jayaraj, S. Laxman, B. Franke, J.W. Byeon, and A.M. Karlsson, October 2004, pp. 53-56.

"A Novel Route to Synthesizing Monoclinic Tungsten Oxide Nanostructures" (Research Summary), P. Kichambare, December 2005, pp. 57-59.

"The Oxidation Properties of Fourth Generation Single-Crystal Nickel-Based Superalloys" (Research Summary), K. Kawagishi, H. Harada, A. Sato, A. Sato, and T. Kobayashi, January 2006, pp. 43-46.

"The Oxidation and Protection of Gamma Titanium Aluminides" (Overview), M.P. Brady, W.J. Brindley, J.L. Smialek, and I.E. Locci, November 1996, pp. 46-50.

"The Oxidation of Single-Crystal Nickel-Based Superalloys(Overview), A. Akhtar, S. Hedge, and R.C. Reed, January 2006, pp. 37-42.

"Predicting Interdendritic Cavity Defects during Casting Solidification" (Research Summary), A.S. Sabau, March 2004, pp. 54-56.

"Predicting Microstructure from Atomistic Rule Set Cellular Automata" (JOM-e: Overview), K.J.W. Atkinson, R.W. Grimes, M.O. Zacate, P.D. Lee, A.G. Jackson, and S.R. LeClair, August 1999.

"Predicting Oxide Stability in High-Temperature Water Vapor" (Research Summary), E.J. Opila, N.S. Jacobson, D.L. Myers, and E.H. Copland, January 2006, pp. 22-28.

"Producing Functionally Graded Coatings by Laser-Powder Cladding" (JOM-e: Research Summary), Y.T. Pei and J.Th.M. De Hosson, January 2000.

"Production-Scale Molecular Beam Epitaxy for High-Frequency Applications" (Overview), F.J. Bruni and L.T. Nuyen, August 1998, pp. 34-36.

"Progress in the First Ten Years of HTS Film Growth" (Overview), D.B. Chrisey, October 1997, pp. 28-32.

"The Pulse Thermal Processing of Nanocrystalline Silicon Thin-Films" (Research Summary), R.D. Ott, P. Kadolkar, C.A. Blue, and G.B. Thompson, October 2004, pp. 45-47.

"Ranking Protective Coatings: Laboratory vs. Field Experience" (Overview), J.A. Conner and W.B. Connor, December 1994, pp. 35-38.

"Recent Progress in the Coating Protection of Gamma Titanium-Aluminides" (Research Summary), C. Leyens, R. Braun, M. Fröhlich, and P.Eh. Hovsepian, January 2006, pp. 17-21.

"Refractory Ceramic-Composite Coatings via Laser Surface Engineering" (Research Summary), N.B. Dahotre and A. Agarwal, April 1999, pp. 19-21.

"The Potential Toxicity of Nanomaterials—The Role of Surfaces" (Overview), A.S. Karakoti, L.L. Hench, and S. Seal, July 2006, pp. 77-82.

"Ruthenium-Containing Bond Coats for Thermal Barrier Coating Systems" (Research Summary), B. Tryon, F. Cao, K.S. Murphy, C.G. Levi, and T.M. Pollock, January 2006, pp. 53-59.

"The Solution Precursor Plasma Spray Processing of Nanomaterials" (Overview), E. Brinley, K.S. Babu, and S. Seal, July 2007, pp. 54-59.

"The Spray Forming of Nanostructured Aluminum Oxide" (Research Summary), A. Agarwal, T. McKechnie, and S. Seal, September 2002, pp. 42-44.

"Sputter Deposited Zirconia-Alumina Nanolaminate Coatings" (Research Summary), C.R. Aita, C.M. Scanlan, and M. Gajdardziska-Josifovska, October 1994, pp. 40-42.

"Sputtering Targets: A Technology and Market Analysis" (Economics), M.N. Rittner, March 2000, pp. 22-23.

"The Status of Chemical Sensors for Hot-Dip Galvanization" (Overview), J.W. Fergus, September 1996, pp. 38-41.

"A Strength Evaluation of SiC Fibers Prepared by RFCVD" (Overview), Y. Du, X. Chang, N. Shi, J.C.Y. Chung, and K.P. Rao, March 1998, pp. 36-39.

"Structure and Mechanical Properties of Nanolaminated Ti-Al Thin Films" (Research Summary), R. Ahuja and H.L. Fraser, October 1994, pp. 35-39.

"The Structure and Properties of Nanocrystalline Materials: Issues and Concerns" (Overview), C. Suryanarayana, September 2002, pp. 24-27.

"Studying and Modeling Surface Gas Nitriding for Titanium Alloys" (Research Summary), A. Zhecheva, S. Malinov, and W. Sha, June 2007, pp. 38-40.

"Submicron Particle Chemistry: Vapor Condensation Analogous to Liquid Solidification"(Overview), Neil T. Jenkins and Thomas W. Eagar, June 2003, pp. 44-47.

"Superalloys and Coatings for High-Temperature Applications" (Commentary), R.D. Reed, January 2006, p. 36.

"Surface Design and Effects in Biological Environments" (Commentary), Sudipta Seal and Narendra B. Dahotre, July 2006, p. 51.

"Surface Engineering in Micro-Nanotechnology" (Commentary), N.B. Dahotre and S. Seal, December 2005, p. 45.

"Surface Engineering of Aluminum Alloys for Automotive Engine Applications" (Research Summary), S. Nayak and N.B. Dahotre, January 2004, pp. 46-48.

"Surface Engineering via Nanotechnology: Clusters to Components" (Commentary), S. Seal and N.B. Dahotre, January 2004, pp. 34-35.

"Surface Modification Technologies VII—A Review" (Conference Review), W.E. Reitz, July 1994, p. 54.

"The Suspension Plasma Spraying of Bioceramics by Induction Plasma" (Research Summary), E. Bouyer, F. Gitzhofer, and M.I. Boulos, February 1997, pp. 58-62.

"Synthesis of Nanostructured Materials Using Template-Assisted Electrodeposition" (Overview), D. Bera, S.C. Kuiry, and S. Seal, January 2004, pp. 49-53.

"Technigalva and Other Developments in Batch Hot-Dip Galvanizing" (Overview), Z.W. Chen, N.F. Kennon, J.B. See, and M.A. Barter, January 1992, pp. 22-26.

"The Thermal Spray Processing of HA Powders and Coatings" (Research Summary), K.A. Khor, P. Cheang, and Y. Wang, February 1997, pp. 51-57.

"The Thermal Spraying of Aluminum as an Adhesive-Bond Pretreatment" (Innovations in Aluminum, Part I), G.D. Davis, May 1997, pp. 25-27.

"Thermal Spraying II: Recent Advances in Thermal Spray Forming" (Overview), R.W. Smith and R. Knight, April 1996, pp. 16-19.

"The Thermocyclic Behavior of Differently Stabilized and Structured EB-PVD TBCs" (JOM-e: Research Summary), U. Schulz, K. Fritscher, C. Leyens, M. Peters, and W.A. Kaysser, October 1997.

"Transition Metal Nitride Functional Coatings" (Overview), Sudipta Seal, September 2001, pp. 51-54.

"The Use of Functionally Gradient Materials in Medicine" (Overview), Roger J. Narayan, Linn W. Hobbs, Chunming Jin, and Afsaneh Rabiei, July 2006, pp. 52-56.

"Using Coated Ceramic Particles to Increase Wear Resistance in High-Speed Steels" (Research Summary), C. Jouanny-Tresy, M. Vardavoulias, and M. Jeandin, April 1995, pp. 26-30.

"Vacuum Plasma Spraying: A New Concept for Manufacturing Ti-6Al-4V Structures" (Overview), H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, September 2006, pp. 50-56.

"The Volume Production of GaAs and Related Compounds by MOVPE" (Overview), M. Hata, August 1998, pp. 40-43.

"Wettability, Spreading, and Interfacial Phenomena in High-Temperature Coatings" (JOM-e: Overview), R. Asthana and N. Sobczak, January 2000.