TMS Logo

Materials Week '97: 17th ASM Heat Treating Conference & Exposition


September 14-18, 1997 · MATERIALS WEEK '97 · Indianapolis, Indiana

MW97 Logo Focusing on physical metallurgy and materials, Materials Week '97, which incorporates the TMS Fall Meeting, features a wide array of technical symposia sponsored by The Minerals, Metals & Materials Society (TMS) and ASM International.

The meeting will be held September 14-18 in Indianapolis, Indiana. The Materials Week '97 technical program will be held concurrently with several ASM-sponsored specialty conferences: 17th ASM Heat Treating Conference & Exposition, United Thermal Spray Conference, and the Materials Solutions Conference. The programming planned for the Heat Treating Conference is described on this page.

The Materials Week '97 registration fee provides access to all of these conferences. For additional detail on the ASM-sponsored conferences, visit ASM's Annual Event '97 site.

HEAT TREATING CONFERENCE
Accelerated Cooling/Direct Quench of Steels (Joint with Materials Solutions Conference) Room 107
  • Monday AM--Structural Steels I
  • Monday PM--Structural Steels II
  • Tuesday AM--Hot Strip Mill Products I
  • Tuesday PM--Hot Strip Mill Products II
  • Wednesday AM--Direct Forge Quench/Heat Treatment I
  • Wednesday PM--Direct Forge Quench Heat Treatment II
Advance Gas Fired Systems Room 101
  • Tuesday AM
Advanced Carburizing Materials & Equipment Room 106
  • Thursday AM
Advances in Integral Quench Furnaces Room 101
  • Wednesday AM
  • Wednesday AM (Panel 5)
Batch vs. Continuous Furnace Designs & Appliances Room 105
  • Tuesday PM
Business Issues & Justifying the Purchase Room 102
  • Monday PM
Clean/Dry of Ferrous/NonFerrous Parts Room 102
  • Monday AM
Considerations of Prepared Atmospheres Room 101
  • Monday AM
  • Monday PM (Panel 5)
Control Systems for Vacuum Furnace Room 101
  • Wednesday PM
Diffusion Related Processes Room 105
  • Wednesday PM--Shafts
  • Wednesday PM--Fasteners
  • Thursday AM--Engines
  • Thursday AM--Gears
  • Thursday AM--Unique
Distortion Room 102
  • Tuesday AM--Modeling Distortion
  • Tuesday AM--Residual Stress & Distortion
  • Tuesday PM--New Quench Technology for Distortion Control
  • Tuesday PM--Distortion Clinic (Panel 5)
Fluidized Bed Technology Room 101
  • Monday AM
Gas vs. Electric Heating Room 101
  • Tuesday PM
Gear Heat Treatment for Distortion Control Room 102
  • Wednesday AM
Heat Treatment of Fasteners Room 102
  • Wednesday PM
High Pressure Gas Quench Room 108
  • Wednesday PM
Improved Quality Room 106
  • Wednesday PM
Induction Room 103*
  • Monday AM--Mathematical Modeling I
  • Monday AM--Mathematical Modeling II
  • Monday AM--Application & Technology *Room 104
  • Monday AM--Innovations in Systems & Materials *Room 104
  • Monday PM--Power Supply I
  • Monday PM--Power Supply II
  • Monday PM--Applications & Processes *Room 104
  • Monday PM--Quenching & Materials *Room 104
  • Tuesday AM--Power Supply III
  • Tuesday AM--Process Control Developments
  • Tuesday AM--Process & Equipment Innovations *Room 104
  • Tuesday AM--Equipment Design Developments *Room 104
  • Tuesday PM--Power Supply IV
  • Tuesday PM--Mathematical Modeling III
  • Tuesday PM--Materials & Processes Considerations *Room 104
  • Tuesday PM--Innovations in Induction Heat Treating *Room 104
  • Wednesday AM--Mathematical Modeling IV
  • Wednesday AM--Mathematical Modeling V
  • Wednesday AM--Process Control Technology Improvements *Room 104
  • Wednesday AM--Process Technology Advancements *Room 104
Induction Equipment Choices Room 102
  • Monday PM
Innovative Equipment Design Room 101
  • Wednesday PM
Low Temperature Vacuum Heat Treatment Room 102
  • Wednesday AM
Modeling, Carburizing, Nitriding & Related Diffusional Surface Treatments (Joint with Materials Week '97) Room 105
Nitrogen Based Atmosphere vs. General Atmosphere Room 101
  • Thursday AM (Panel 6)
  • Thursday AM
Nonferrous Room 106
  • Monday AM--Aluminum Heat Treatments I
  • Monday AM--Aluminum Quench I
  • Monday PM--Distortion & Residual Stresses
  • Monday PM--Aluminum Quench II
  • Tuesday AM--Aluminum Heat Treatments II
  • Tuesday AM--Aluminum Heat Treatments III
  • Tuesday PM--Aluminum Heat Treatments IV
Powder Metal Heat Treatment Room 103
  • Wednesday AM
  • Wednesday AM
Processes that Reduce Distortion Room 106
  • Wednesday AM
  • Wednesday PM--Case History Solutions to Distortion
Quench/Cool Room 108
  • Monday PM--New Methods and Modeling
  • Monday PM--Steel Quench MethodS
  • Tuesday AM--Quench Systems
  • Tuesday AM--Quench General Subjects I
  • Tuesday PM--Quench General Subjects II
  • Tuesday PM--Quench General Subjects III
Resource Management Room 106
  • Wednesday AM
Salt Bath Technology Room 102
  • Wednesday PM
  • Thursday AM
Steel Transformations: Heat Treatment of Steels Room 108
  • Wednesday PM
Student Res. In Progress Room 112
  • Monday PM
Upgrading Atmospheric Furnaces Room 101
  • Tuesday AM (Panel 6)
Search Materials Week '97 TMS Meetings Page About TMS TMS OnLine